PSC150CT5S15-15

EURO CASSETTE PSC150 & 240 Series 100-240 WATTS DC/DC SINGLE MULTI OUTPUT Features • • • • • • • Very wide input range Convection cooled Operating temperature to 70°C Meets IP30 Conformal coated IEC1000-4-4, EN55022-3 IEC950, EN60950 Specifications INPUT Nominal Voltage Current at No Load (max) Protection Isolation EMC Soft Start See selection chart 3W–5W Fuse on board, reverse voltage protection 4000VAC EN55011/EN55022 Level B Yes with inrush current limit MECHANICAL Case Dimensions Connectors Eurocassette See drawing examples. Consult sales office for full details 15 Pole DIN standard 41612 H15 OPTIONS A – Overvoltage protection (OVP) A built in SCR thyristor short circuits the output when an overvoltage occurs. The trigger voltage is 15% higher than the nominal output voltage. C – Series diode on output For parallel redundant applications built in series diodes can be provided. The output power may be derated depending upon the model. E1 – 2.5kVAC isolation between input/output and input/case. On 24 & 48V inputs. The emission level incrases to level A. E2 – Same as E1 but also 2.5kVAC between output/case. L – Front panel for eurorack 10, 12, 14 TE K1 – Input diode in series K2 – Built in glass fuse on PSC80, PSC100 and PSC150 M – Inrush current limit with NTC-resistor on D-input N – Wall mounting brackets H15S– H15 female screw connector O – Rear Eurorack mounting brackets S – Remote sense NTC – Inrush current limit with NTC Input - Mobile application, consult sales OUTPUT Power Voltage Adjustment Current Limit Ripple & Noise pk-pk Regulation Temperature Coefficient Transient Response Overvoltage Protection 50W, 80W, 100W, 150W, 200W and 240W -10% to +10% 105% 10mV pk-pk typical Line: 0.2% L1 to H1; Load: 0.2% NL to FL 0.02% per °C 10% up to 100% typical