V300C48E500BF

300V 2nd Gen 50-500W PCB MOUNTING COMPONENTS MODULES Features • • • • • Input Voltage: 180-375Vdc Output Voltage: 2-48Vdc Output Power (per module):Maxi: 500W Mini: 250W Micro: 150W Efficiency: Up to 91% Agency Approvals: UL, CSA, TUV, VDE, BABT,CE Marked, C-Tick Specifications GENERAL Units Set point accuracy Line regulation Load regulation Temperature regulation Ripple and noise, p-p Overvoltage set point Current limit Efficiency: 5Vout Programming range Short circuit current Isolation voltage ±1% Vout nom. ±0.02% Vout nom. ±0.02% Vout nom. ±0.002% Vout/oC 100mV 115%Vout nom. 115% Iout max. 82% 10-110% Vout nom. 115%Iout max. 3000Vrms Output Voltage Input to Output Vout 95% of nominal Nominal input; Notes Nominal input; Low line to high No load to full -20°C to 100°C Full load, 20MHz Selection Table OUTPUT VOLTAGE (VDC) 2V 3.3V 5V 12V 15V 24V 28V 48V OUTPUT POWER (W) MAXI MINI MICRO 160 100 50 264 400 500 500 500 500 500 150 200 250 250 250 250 250 75/50 100/50 150/75 150/75 150/75 150/75 150/75 Remote sense compensation 0.5Volts Product Grade Specifications E C T H M Operating Temp. (°C) -10 to 100 -20 to 100 -40 to 100 -40 to 100 -55 to 100 Storage Temp. (°C) -20 to 125 -40 to 125 -40 to 125 -55 to 125 -65 to 125 Temp. Cycling (°C) Burn-In Low Temp.Test (°C) High Temp.Test (°C) Final Test Data none none none none none none none none none none none none none none none 24 hours 12 hours -40°C 100°C 24 hours 24 hours -55°C 100°C (-55 to 125) (-65 to 125) (typical unless otherwise noted) STANDARDS AND APPROVALS C-Tick AS/NZS CISPR11 Group 1 Class A Mechanical Drawings refer to page 237-238 *Other O/P voltage consult sales Part Numbering 300 Your dependable power partner – www.powerbox.com.au 235