MODULES
48V 2nd Gen
50-500W PCB MOUNTING COMPONENTS
Features
• • • • • • Input Voltage: 36-75Vdc Output Voltage: 2-48Vdc Output Power (per module) Micro: 150W, Mini: 250W, Maxi: 500W Efficiency: Up to 90% Agency Approvals: UL, CSA, TUV, VDE, BABT,CE Marked, C-Tick
Specifications
GENERAL UNITS Set point accuracy Line regulation Load regulation Temperature regulation Ripple and noise, p-p Remote sense compensation Overvoltage set point Current limit Efficiency: 5Vout 24Vout Programming range Short circuit current Isolation voltage ±1%Vout nom ±0.02%Vout nom. ±0.02%Vout nom. ±0.002%Vout/°C 100 mV 0.5 Volts 115% Vout nom. 115% out max. 83% Vout 95% of Nominal input; 88% 10-110 % Vout nom. 115% out max. 3000 Vrms Output Voltage Input to Output NOTES Nominal input; Low line to high No load to full -20°C to 100oC Full load, 20MHz
Selection Table
OUTPUT VOLTAGE (VDC) 2V 3.3V 5V 12V 15V 24V 28V 48V OUTPUT POWER (W) MAXI MINI MICRO N/A 100 50 264 400 500 500 500 500 500 150 200 250 250 250 250 250 75 100/75/50 150 150 150 150 150
Product Grade Specifications
E C T H M Operating Temp. (°C) -10 to 100 -20 to 100 -40 to 100 -40 to 100 -55 to 100 Storage Temp. (°C) -20 to 125 -40 to 125 -40 to 125 -55 to 125 -65 to 125 Temp. Cycling (°C) Burn-In Low Temp.Test (°C) High Temp.Test (°C) Final Test Data
none none none none none none none none none none none none none none none 24 hours 12 hours -40°C 100°C 24 hours 24 hours -55°C 100°C (-55 to 125) (-65 to 125)
(typical unless otherwise noted)
STANDARDS AND APPROVALS C-Tick
AS/NZS CISPR11 Group 1 Class A
Mechanical Drawings refer to page 237-238
Part Numbering
48
234
