CD430840A

CD43__40A Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR Isolated Module 40 Amperes / Up to 1600 Volts TM Description: OUTLINE DRAWING A C F G H T 2 3 B 1 45 76 J K "S" FASTON TAB "U" THREAD L R Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. CD43__40A Dual SCR Isolated TM POW-R-BLOK Module 40 Amperes / Up to 1600 Volts D M LABEL N P Q Features: T T T T Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Copper Baseplate Low Thermal Impedance for Improved Current Capability T UL Recognized (E78240) 4 5 2 7 6 ~ 1 + CONNECTION DIAGRAM - 3 Benefits: T No Additional Insulation Components Required T Easy Installation T No Clamping Components Required T Reduce Engineering Time CD43 Outline Dimensions Dimension A B C D F G H J K L M N P Q R S T U Inches 3.62 0.83 3.15 1.18 0.59 0.79 0.79 0.16 0.23 0.61 1.14 0.25 0.94 1.18 0.71 0.11 x .03 0.25 M5 Millimeters 92 21 80 30 15 20 20 4 5.8 15.5 29 6.3 24 30 18 2.8 x 0.8 6.3 M5 Ordering Information: Select the complete nine digit module part number from the table below. Example: CD431640A is a 1600Volt, 40 Ampere Dual SCR Isolated TM POW-R-BLOK Module Applications: T T T T T T T T Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control W elders Type CD43 Voltage Volts (x100) 08 12 16 Current Amperes (x 1) 40 Note: Dimensions are for reference only. Revision Date: 01/26/2002 CD43__40A Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR Isolated Module 40 Amperes / Up to 1600 Volts TM Absolute Maximum Ratings Characteristics Repetitive Peak Forward and Reverse Blocking Voltage Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 180° Conduction, TC=91°C 180° Conduction, TC=91°C (AC Switch) 180° Conduction, TC=91°C 60 Hz, 100% VRRM reapplied, Tj=125°C 60 Hz, No VRRM reapplied, Tj=125°C 60 Hz, No VRRM reapplied, Tj=25°C 50 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, No VRRM reapplied, Tj=125°C 50 Hz, No VRRM reapplied, Tj=25°C Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, 100% VRRM reapplied, Tj=125°C Peak Ten Cycle Surge Current, Non-Repetitive I t for Fusing for One Cycle, 8.3 milliseconds 2 Conditions Symbol VDRM & VRRM VRSM IT(RMS) IT(RMS) IT(AV) ITSM ITSM ITSM ITSM ITSM ITSM ITSM ITSM ITSM ITSM It It It It It It di/dt 2 2 2 2 2 2 Units up to 1600 VRRM + 100 63 93 40 750 890 985 715 850 940 570 545 460 445 2330 3300 4030 2560 3610 4420 150 2 2 2 2 2 2 V V A A A A A A A A A A A A A A sec A sec A sec A sec A sec A sec A/µs 60 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, 100% VRRM reapplied, Tj=125°C 8.3 ms, 100% VRRM reapplied, Tj=125°C 8.3 ms, No VRRM reapplied, Tj=125°C 8.3 ms, No VRRM reapplied, Tj=25°C 10 ms, 100% VRRM reapplied, Tj=125°C 10 ms, No VRRM reapplied, Tj=125°C 10 ms, No VRRM reapplied, Tj=25°C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Peak Gate Power Dissipation Average Gate Power Dissipation Peak Forward Gate Current Peak Reverse Gate Voltage Operating Temperature Storage Temperature Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together Tj=25°C, IG=0.5 A, VD=0.67 VDRM (Rated), ITM=300A , Tr < 0.5µs, tp > 6µs Tp < 5 ms, Tj = 125°C F = 50 Hz, Tj = 125°C Tp < 5 ms, Tj = 125°C Tp < 5 ms, Tj = 125°C PGM PG(AV) IGFM VGRM TJ Tstg 10 2.5 2.5 10 -40 to +125 -40 to +125 25 3 44 5 110 3.88 W W A V °C °C in.-Lb. Nm in.-Lb. Nm g oz. V V 50 – 60 Hz, 1 minute 50 – 60 Hz, 1 second Vrms Vrms 2500 3500 Revision Date: 01/26/2002 CD43__40A Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR Isolated Module 40 Amperes / Up to 1600 Volts TM Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Peak On-State Voltage Threshold Voltage, Low-level Slope Resistance, Low-level Threshold Voltage, High-level Slope Resistance, High-level VTM Coefficients, Full Range Symbol IDRM IRRM VFM V(TO)1 rT1 V(TO)2 rT2 Test Conditions Up to 1600V, TJ=125°C Up to 1600V, TJ=125°C ITM=140A TJ = 125°C, I = 16.7% x πIT(AV) to πIT(AV) TJ = 125°C, I = πIT(AV) to ITSM TJ = 125°C, I = 15% x IT(AV) to ITSM VTM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt Turn-Off Time (Typical) dV/dt t off Linear to 2/3 VDRM Tj=125°C, Gate Open Circuit TJ = 25°C, IT = 2A Vr = 50V, -dI/dt=10 A/µs Re-Applied dV/dt = 200 V/µs, Linear to 900 V Tj= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load Tj= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load Tj=125°C, VD=VDRM Tj=125°C, VD=VDRM VD=6V, Resistive Load, Gate Open VD=6V, Resistive Load A= B= C= D= 500 40 - 100 (Typical) Min. Max. 15 15 1.81 0.88 5.90 0.91 5.74 0.872 -1.86 E-3 5.65 E-3 4.33 E-3 V/µs µs Units mA mA V V mΩ V mΩ Gate Trigger Current IGT 270 150 80 4.0 2.5 1.7 0.25 6 200 400 mA mA mA Volts Volts Volts Volts mA mA mA Gate Trigger Voltage VGT Non-Triggering Gate Voltage Non-Triggering Gate Current Holding Current Latching Current VGDM IGDM IH IL Thermal Characteristics Characteristics Thermal Resistance, Junction to Case DC Operation Thermal Impedance Coefficients Symbol RΘJ-C ZΘJ-C Per Module, both conducting Per Junction, both conducting ZΘJ-C= K1 (1-exp(-t/τ1)) + K2 (1-exp(-t/τ2)) + K3 (1-exp(-t/τ3)) Thermal Resistance, Case to Sink Lubricated RΘC-S + K4 (1-exp(-t/τ4)) Per Module K1 = 1.77 E-2 K2 = -1.00 E-2 K3 = 1.46 E-1 K4 = 3.07 E-1 Max. 0.230 0.460 τ1 = 4.73 E-4 τ2 = 1.67 E-3 τ3 = 9.77 E-3 τ4 = 8.76 E-2 0.1 °C/W Units °C/W °C/W Revision Date: 01/26/2002 CD43__40A Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOK Dual SCR Isolated Module 40 Amperes / Up to 1600 Volts Maximum Transient Thermal Impedance (Junction to Case) TM Maximum On-State Forward Voltage Drop ( Tj = 125 °C ) 7 6 5 4 3 2 1 0.50 0.45 On-State Voltage - Vtm / Vfm - Volts Thermal Impedance - Rjc - °C/W 10 100 1000 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0.00 0.001 0.01 0.1 1 10 100 Instantaneous On-State Current - Itm/Ifm - Amperes Time - t - Seconds Maximum On-State Power Dissipation (Sinusoidal Waveform) 60 55 120° 90° 60° 30° Maximum Allowable Case Temperature (Sinusoidal Waveform) 125 120 115 0 180 360 Max. Power Dissipation Per SCR - Watts 45 40 35 30 25 20 15 10 5 0 0 5 10 15 20 Max. Case Temperature - Tcase -°C 50 180° 110 105 100 95 30° 90 60° 20 25 CONDUCTION ANGLE 0 180 360 CONDUCTION ANGLE 90° 30 120° 35 180° 40 25 30 35 40 0 5 10 15 Average On-State Current - It(av) - Amperes Average On-State Current - It(av) - Amperes Maximum On-State Power Dissipation (Rectangular Waveform) 80 270° 70 360° 125 120 Maximum Allowable Case Temperature (Rectangular Waveform) Max. Power Dissipation Per SCR - Watts 60 50 30° 40 30 20 60° 90° Max. Case Temperature - Tcase -°C 180° 120° 115 110 105 100 95 90 85 30° 60° 90° 120° 0 CONDUCTION ANGLE 180 360 0 10 0 0 5 10 15 20 25 30 35 40 CONDUCTION ANGLE 180 360 360° 180° 270° 45 50 55 60 65 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Average On-State Current - It(av) - Amperes Average On-State Current - It(av) - Amperes Revision Date: 01/26/2002