LD411860

LD41__60 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Description: OUTLINE DRAWING Powerex Dual Diode Modules are designed for use in applications requiring rectification and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A R B C J F K L Q - DIA. (4 TYP.) G H P - M10 THD (3 TYP.) M E N 2 1 3 CONNECTION DIAGRAM Ordering Information: Select the complete eight-digit module part number from the table below. Example: LD412460 is a 2400V, 600 Ampere Dual Diode Isolated TM POW-R-BLOK Module. LD41 LD41__60 Dual Diode TM POW-R-BLOK Module 600 Amperes / 800-2600 Volts LD41 Outline Dimensions S Type D 1 2 3 TM POW-R-BLOK Dual Diode Isolated Module 600 Amperes / Up to 2600 Volts Voltage Volts (x100) Current Amperes (x10) 08 10 12 to 26 60 Dimension Inches Millimeters A 5.91 150.0 B 4.88 124.0 C 4.41 112.0 D 2.36 60.0 E 2.05 52.0 F 1.97 50.0 G 1.89 48.0 H 1.73 44.0 J 1.22 31.0 K 1.10 28.0 L 1.00 25.4 M 0.69 17.5 N 0.39 10.0 P M10 Metric M10 Q 0.26 Dia. 6.5 Dia. R 0.24 6.0 S 0.12 3.0 T .110 x .032 2.5 x 0.8 Features:      Electrically Isolated Heatsinking Aluminum Nitride Isolator Compression Bonded Elements Metal Baseplate Low Thermal Impedance for Improved Current Capability  UL Recognized Benefits:  No Additional Insulation Components Required  Easy Installation  No Clamping Components Required  Reduce Engineering Time Applications:      Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Note: Dimensions are for reference only. Revision Date: 08/01/2013 LD41__60 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com TM POW-R-BLOK Dual Diode Isolated Module 600 Amperes / Up to 2600 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Reverse Blocking Voltage VRRM up to 2600 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) RMS Forward Current VRSM VRRM + 100 V IF(RMS) 950 A Average Forward Current 180° Conduction, TC=106°C IF(AV) 600 A Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied 50 Hz, 100% VRRM reapplied 60 Hz, 100%VRRM reapplied IFSM IFSM IFSM 21000 19000 15,500 A A A Peak Ten Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied IFSM 13,000 A 8.3 milliseconds 10 milliseconds Operating Temperature I2t I2t TJ 1,840,000 1,810,000 -40 to +150 A2 sec A2 sec °C Storage Temperature Tstg -40 to +150 °C 55 6 110 12 1500 3.30 in. – Lb. Nm in. – Lb. Nm g lb 3000 V I2t for Fusing for One Cycle Max. Mounting Torque, M6 Mounting Screw Max. Mounting Torque, M10 Terminal Screw Module Weight, Typical V Isolation @ 25C Vrms Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 08/01/2013 LD41__60 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com TM POW-R-BLOK Dual Diode Isolated Module 600 Amperes / Up to 2600 Volts Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Repetitive Peak Reverse Leakage Current Peak On-State Voltage Symbol Test Conditions Min. IRRM Up to 2600V, TJ=150°C Max. Units 40 mA VFM TJ=25°C, IFM=1500A 1.18 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 150°C, I = 15%IF(AV) to πIF(AV) 0.747 0.243 V mΩ Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 TJ = 150°C, I = πIF(AV) to IFSM 0.914 0.145 V mΩ VTM Coefficients, Full Range TJ = 150°C, I = 15%IF(AV) to IFSM VTM = A+ B Ln I +C I + D Sqrt I A= B= C= D= 5.05E-01 3.44E-02 8.13E-05 6.57E-03 Thermal Characteristics Characteristics Symbol Max. Units 0.0325 0.0650 °C/W °C/W Thermal Resistance, Junction to Case RΘJ-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients ZΘJ-C ZΘJ-C= K1 (1-exp(-t/1)) K1 = 8.03E-04 1 = 3.39E-04 + K2 (1-exp(-t/2)) K2 = 1.03E-02 2 = 3.15E-03 + K3 (1-exp(-t/3)) K3 = 1.64E-02 3 = 1.06E-01 + K4 (1-exp(-t/4)) Per Module K4 = 3.75E-02 4 = 2.066 0.01 Thermal Resistance, Case to Sink Lubricated RΘC-S °C/W Revision Date: 08/01/2013 LD41__60 TM POW-R-BLOK Dual Diode Isolated Module 600 Amperes / Up to 2600 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 150 °C ) (Junction to Case) 5.00 0.07 • 0.06 Thermal Impedance - Zjc - °C/W On-State Voltage - Vfm - Volts • 4.00 3.00 2.00 1.00 0.05 0.04 0.03 0.02 0.01 0 0.001 0.00 10 100 1000 10000 100000 0.01 0.1 1 10 100 Time - t - Seconds Instantaneous On-State Current - Ifm - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Sinusoidal Waveform) (Sinusoidal Waveform) 150 120° • 600 180° 145 Max. Case Temperature - Tcase -°C Max. Power Dissipation Per Diode - Watts 700 90° 500 60° 400 30° 15° 300 200 100 140 135 130 15° 125 30° 120 60° 115 90° 110 120° 105 100 0 0 100 200 300 400 500 600 0 700 100 200 300 400 500 600 700 Average On-State Current - If(av) - Amperes Average On-State Current - If(av) - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Rectangular Waveform) (Rectangular Waveform) 1000 150 • 900 270° 800 360° Max. Case Temperature - Tcase -°C Max. Power Dissipation Per Diode - Watts 180° • 180° 700 120° 90° 600 60° 500 30° 400 15° 300 200 100 140 130 15° 30° 120 60° 110 90° 120° 100 180° 270° 90 360° • 0 80 0 200 400 600 800 Average On-State Current - If(av) - Amperes 1000 0 200 400 600 800 1000 Average On-State Current - If(av) - Amperes Revision Date: 08/01/2013 LD41__60 TM POW-R-BLOK Dual Diode Isolated Module 600 Amperes / Up to 2600 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Powerex LD41--60 Pow-R-Blok 6-Pulse Bridge 4000 0.02 0.015 0.01 Total Power Dissipation vs Maximum Rated Output Current 4000 4000 3500 3500 3000 3000 2500 2500 2000 2000 1500 1500 1000 1000 Rth S-A (C/W) 3500 Total Power Dissipation (W) 3000 0.03 2500 0.04 0.05 2000 0.06 1500 0.08 0.10 1000 0.12 Total Power Dissipation (W) 0.025 0.15 0.20 500 500 500 0.30 0 0 0 20 40 60 80 100 120 140 0 500 1000 1500 0 2000 (C) Maximum Bridge Output Six-Pulse Bridge Ambient CircuitTemperature Total Power Dissipation & Maximum Rated Output Current WithCurrent Sink(A) to Ambient Resistance of Heatsink as a Parameter. Revision Date: 08/01/2013 LD41__60 TM POW-R-BLOK Dual Diode Isolated Module 600 Amperes / Up to 2600 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Maximum Surge Current Ratings - 60Hz 1.0 Duration of Surge (ms) 10.0 100.0 1000.0 Peak Surge Current (A) 100,000 Tj initial = 150oC Vr = 0V 10,000 Vr = Vrrm 1,000 0.1 1 10 100 100.0 1000.0 Number of Cycles @ 60Hz Maximum I2t Ratings - 60Hz Duration of Surge (ms) 1.0 10.0 1.00E+08 Maximum I2t (A) Tj initial = 150oC Vr = 0V 1.00E+07 Vr = Vrrm 1.00E+06 1.00E+05 0.1 1 10 100 Number of Cycles @ 60Hz Maximum Surge Ratings - 50Hz Duration of Surge (ms) 1 10 100 1000 Peak Surge Current (A) 100,000 Tj initial = 150oC Vr = 0V 10,000 Vr = Vrrm 1,000 0.1 1 10 100 100.0 1000.0 Number of Cycles @ 50Hz Maximum I2t Ratings - 50Hz Duration of Surge (ms) 1.0 10.0 1.00E+08 Maximum I2t (A) Tj initial = 150oC Vr = 0V 1.00E+07 Vr = Vrrm 1.00E+06 1.00E+05 0.1 1 10 100 Number of Cycles @ 50Hz Revision Date: 08/01/2013