ME700802

ME700802 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Three-Phase Diode Bridge Modules 20 Amperes/800 Volts F K K Description: Powerex Three-Phase Diode Bridge Modules are designed for use in three phase bridge applications. The modules are isolated consisting of six rectifier diodes. These ME70 Modules have been tested and recognized by Underwriters Laboratories (QQQX2 Power Switching Semiconductors). K + E H J - M L - DIA. (2 TYP.) D B A AC INPUT TERMINAL .250 TAB DC OUTPUT TERMINAL G C N ME700802 Three-Phase Diode Bridge Modules 20 Amperes/800 Volts Features: M Isolated Mounting M Planar Chips M UL Recognized Applications: Outline Drawing M Inverters Dimension A B Inches 3.150 2.677±0.012 Millimeters 80 68±0.3 C 1.220 31 D 1.181 30 E 1.142 29 F 0.866 22 G 0.728 18.5 H 0.512 J 0.492 R K L 0.472 13 R12.5 M DC Power Supplies M AC Motor Control Front End Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: ME700802 is an 800 Volt, 20 Ampere Three-Phase Diode Bridge Module. 12 0.256±0.008 Dia. Dia. 6.5±0.2 M 0.118 3 N 0.079 2 Type ME70 Voltage Volts (x100) Current Rating Amperes (x10) 08 02 D-51 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 ME700802 Three-Phase Diode Bridge Modules 20 Amperes/800 Volts Absolute Maximum Ratings Characteristics Symbol Peak Reverse Blocking Voltage VRRM VRSM Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms DC Reverse Blocking Voltage DC Output Current, TC = 107°C Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) 800 Volts 900 Volts 640 20 Amperes IFSM IFSM 350 Amperes 320 Amperes I2t 510 A2sec TSTG Tj Operating Temperature Maximum Mounting Torque M6 Mounting Screw Module Weight (Typical) Volts -40 to 125 °C -40 to 150 — — V Isolation Units VR(DC) IO I2t (for Fusing), 8.3 milliseconds Storage Temperature ME700802 VRMS °C 26 in.-lb. 117 Grams 2000 Volts Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions ME700802 Units Blocking State Maximums Reverse Leakage Current, Peak IRRM Tj = 150°C, VRRM = Rated 1.5 mA Conducting State Maximums Peak On-State Voltage VFM IFM = 20A Ru(J-C) Ru(C-S) Per Module 1.0 °C/Watt Per Module 0.1 °C/Watt Thermal Maximums Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink (Lubricated) Tj = 25oC 1.1 1.0 0.9 0.8 0.7 101 INSTANTANEOUS ON-STATE CURRENT, IFM, (AMPERES) D-52 102 160 MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC) INSTANTANEOUS ON-STATE VOLTAGE, VFM, (VOLTS) 1.2 140 120 100 80 60 0 5 10 15 20 DC OUTPUT CURRENT, IO, (AMPERES) Volts MAXIMUM ON-STATE POWER DISSIPATION MAXIMUM ALLOWABLE CASE TEMPERATURE MAXIMUM ON-STATE CHARACTERISTICS 100 1.07 25 100 80 60 40 20 0 0 10 20 30 40 DC OUTPUT CURRENT, IO, (AMPERES) 50