1SC2060P2A0-17

1SC2060P2Ax-17 1SC2060P2Ax-17 Preliminary Datasheet Single-Channel High-Power High-Frequency SCALE-2 Driver Core Abstract The 1SC2060P2Ax-17 is a 20W, 60A CONCEPT driver core. This high-performance SCALE-2 driver targets highpower single-channel IGBT and MOSFET applications such as induction heating, resonant and high-frequency power conversion as well as parallel gate driving of large modules. It features newly developed planar transformer technology for a real leap forward in power density, noise immunity, and reliability. Equipped with the latest SCALE-2 chipset, the gate driver supports switching up to 500kHz at best-in-class efficiency. The 1SC2060P2Ax-17 effectively comprises a complete single-channel IGBT driver core, fully equipped with an isolated DC/DC converter, short-circuit protection, advanced active clamping and supplyvoltage monitoring. With its extremely compact outline of 44mm x 74mm and a total height of typ. 6.5mm, it delivers high power density with an attractive form factor. Thanks to the highly integrated SCALE-2 chipset, the component count is reduced by 80% compared to conventional solutions. This results in significantly increased reliability and reduced costs. Product Highlights  20W maximum output power  Switching up to 500kHz  New SCALE-2 platform  Planar transformer  Jitter less than ±1ns  Signal delay < 80ns  3.3V…15V input logic  1700V isolation (signal + DC/DC)  Safe isolation to EN 50178  UL compliant  Dedicated IGBT and MOSFET mode IGBT-Driver.com Applications  Induction heating  High-frequency converters  High-current switches  Industrial drives  Pulse power  Resonant switching  Wind power converters  Single switch control  Parallel connection of modules Page 1 1SC2060P2Ax-17 Preliminary Data Sheet Safety Notice! The data contained in this data sheet is intended exclusively for technically trained staff. Handling all highvoltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory! Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and important information that apply to this product, please refer to “1SC2060P Description & Application Manual” on www.IGBT-Driver.com/go/1SC2060P Absolute Maximum Ratings Parameter Remarks Supply voltage V DC VDC to GND Supply voltage V CC Logic input and output voltages SO current Gate peak current I out Average supply current I DC Output power VCC to GND Primary side, to GND Failure condition, total current Notes 1, 11 Notes 2, 3 Ambient temperature 3V V(IN) V(IN) Failure condition, I(SO)