SCALE™-2 2SC0108T2D0-12, 2SC0108T2D0C-12
2SC0108T2D0-12 and 2SC0108T2D0C-12
Preliminary Data Sheet
Dual Channel Ultra-compact Low-cost SCALE™-2 Driver Core
Short Description
The low-cost SCALE™-2 dual-driver core 2SC0108T2D0-12 / 2SC0108T2D0C-12 (Coated version using
ELPEGUARD SL 1307 FLZ/2 from Lackwerke Peters) combines unrivalled compactness with broad applicability.
The driver is designed for universal applications requiring high reliability. The 2SC0108T2D0(C)-12 drives all
usual IGBT modules up to 1200V. The embedded paralleling capability allows easy inverter design covering
higher power ratings. Multi-level topologies are also supported.
The 2SC0108T2D0(C)-12 is the most compact driver core available for industrial applications, with a footprint
of only 45 x 34.3mm and an insertion height of max. 16mm. It allows even the most restricted insertion
spaces to be efficiently used. Compared with conventional drivers, the highly integrated SCALE-2 chipset
allows about 85% of components to be dispensed with. This advantage is impressively reflected in increased
reliability at simultaneously minimized cost.
The 2SC0108T2D0(C)-12 combines a complete two-channel driver core with all components required for
driving, such as an isolated DC/DC converter, short-circuit protection, advanced active clamping as well as
supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and
the other secondary channel.
An output current of 8A and 1W drive power is available per channel, making the 2SC0108T2D0(C)-12 an ideal
driver platform for universal usage in small and medium power applications. The driver provides a gate voltage
swing of +15V/–8V. The turn-on voltage is regulated to maintain a stable 15V regardless of the output power
level.
Its outstanding EMC allows safe and reliable operation in even hard industrial applications.
Product Highlights
Ultra-compact dual channel driver
Highly integrated SCALE-2 chipset
Gate current ±8A, 1W output power per channel
+15V/-8V gate driving
Blocking voltages up to 1200V
Safe isolation to EN 50178
Short delay and low jitter
Interface for 3.3V...15V logic level
UL compliant
www.power.com/igbt-driver
Applications
General purpose drives
Uninterruptible power supplies (UPS)
Solar and wind power converters
Auxiliary converters for traction
Electro/hybrid drive vehicles
Driving parallel-connected IGBTs
Switched mode power supplies (SMPS)
Medical (MRT, CT, X-Ray)
Laser technology
Page 1
SCALE™-2 2SC0108T2D0-12, 2SC0108T2D0C-12
Preliminary Data Sheet
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all highvoltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!
Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the
workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.
Important Product Documentation
This data sheet contains only product-specific data. For a detailed description, must-read application notes and
important information that apply to this product, please refer to “2SC0108T2Dx-xx Description & Application
Manual” on www.power.com/igbt-driver/go/2SC0108T
Absolute Maximum Ratings
Parameter
Remarks
Min
Supply voltage VCC
Logic input and output voltages
SOx current
Gate peak current Iout
External gate resistance
IGBT gate charge
Average supply current ICC
Output power
VCC to GND
Primary side, to GND
Failure condition, total current
Note 1
Turn-on and turn-off
0
16
V
-0.5 VCC+0.5 V
20
mA
-8
+8
A
2
Ω
6.3
µC
260
mA
1.2
W
1
W
3800 VAC(eff)
Test voltage (50Hz/1min.)
Switching frequency f
|dV/dt|
Operating voltage
Operating temperature
Storage temperature
Surface temperature
Notes 2, 3
Ambient temperature
很抱歉,暂时无法提供与“2SC0108T2D0-12”相匹配的价格&库存,您可以联系我们找货
免费人工找货