2SP0115T2Cx-06
2SP0115T2Cx-06
Preliminary Data Sheet
Compact, high-performance, plug-and-play dual-channel IGBT driver based on
SCALE™-2 technology for individual and parallel-connected modules
Abstract
The SCALE™-2 plug-and-play driver 2SP0115T2Cx-06 is a compact dual-channel intelligent gate driver
designed for 600V 17mm dual IGBT modules. The driver features an electrical interface with a built-in DC/DC
power supply.
The turn-on and turn-off gate resistors of both channels are not assembled in order to provide
maximum flexibility. They must be assembled by the user before start of operation. Please refer to
the paragraph on “Gate Resistor Assembly” for the recommended gate resistors.
For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to
www.IGBT-Driver.com/go/plug-and-play
Features
Applications
Plug-and-play solution
Allows parallel connection of IGBT modules
Shortens application development time
Extremely reliable; long service life
Built-in DC/DC power supply
20-pin flat cable interface
Duty cycle 0... 100%
Active clamping of V at turn-off
IGBT short-circuit protection
Monitoring of supply voltage
Safe isolation to EN 50178
UL compliant
Suitable for 600V 17mm dual IGBT modules
Gate resistors not assembled
ce
www.IGBT-Driver.com
Wind-power converters
Industrial drives
UPS
Power-factor correctors
Traction
Railroad power supplies
Welding
SMPS
Radiology and laser technology
Research
and many others
Page 1
2SP0115T2Cx-06
Preliminary Data Sheet
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all highvoltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!
Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the
workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.
Important Product Documentation
This data sheet contains only product-specific data. For a detailed description, must-read application notes and
common data that apply to the whole series, please refer to “Description & Application Manual for 2SP0115T
SCALE-2 IGBT Drivers” on www.IGBT-Driver.com/go/2SP0115T.
The gate resistors on this gate driver are not assembled in order to provide maximum flexibility. For the gate
resistors required for specific IGBT modules, refer to the paragraph on “Gate Resistor Assembly”. Use of gate
resistors other than those specified may result in failure.
Mechanical Dimensions
Dimensions: See “Description & Application Manual for 2SP0115T SCALE-2 IGBT Drivers”
Mounting principle: Soldered onto 17mm dual IGBT module
Absolute Maximum Ratings
Parameter
Remarks
Min
Supply voltage VCC
Logic input and output voltages
SOx current
Gate peak current Iout
Average supply current ICC
Output power per gate
VCC to GND
To GND
Fault condition, total current
Note 1
Note 2
Ambient temperature
很抱歉,暂时无法提供与“2SP0115T2C0-06”相匹配的价格&库存,您可以联系我们找货
免费人工找货