LXA08FP600

LXA08T600, LXA08B600, LXA08FP600 Qspeed™ Family 600 V, 8 A X-Series PFC Diode Product Summary IF(AVG) VRRM QRR (Typ at 125 °C) IRRM (Typ at 125 °C) Softness tb/ta (Typ at 125 °C) 8 600 82 3.5 0.55 A V nC A General Description This device has the lowest QRR of any 600V Silicon diode. Its recovery characteristics increase efficiency, reduce EMI and eliminate snubbers. Applications Pin Assignment K K • • • Power Factor Correction (PFC) Boost Diode Motor drive circuits DC-AC Inverters NC NC K K A Features • • • • Low QRR, Low IRRM, Low tRR High dIF/dt capable (1000A/µs) Soft recovery FullPak Insulation = 2500VRMS A TO-220AC LXA08T600 TO-263AB LXA08B600 Benefits • K A TO-220 FullPak LXA08FP600 A K Increases efficiency • Eliminates need for snubber circuits • Reduces EMI filter component size & count • Enables extremely fast switching RoHS Compliant Package uses Lead-free plating and Green mold compound. Halogen free per IEC 61249-2-21. Absolute Maximum Ratings Absolute maximum ratings are the values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Symbol VRRM IF(AVG) IFSM IFSM TJ(MAX) TSTG Parameter Peak repetitive reverse voltage Average forward current Non-repetitive peak surge current Non-repetitive peak surge current Maximum junction temperature Storage temperature Lead soldering temperature Power dissipation Conditions TJ = 150 °C, TC = 122 °C (220AC, 263AB) TJ = 150 °C, TC = 81°C. (FullPak) 60 Hz, ½ cycle ½ cycle of t=28 µs Sinusoid, TC=25 °C Rating 600 8 60 350 150 –55 to 150 300 83 34 Units V A A A °C °C °C W W PD Leads at 1.6 mm from case, 10 sec TC = 25 °C. (220AC, 263AB) TC = 25°C. (FullPak) www.powerint.com January 2011 LXA08T600/8B600/8FP600 Thermal Resistance Symbol RθJA RθJC Resistance from: Junction to ambient Junction to case Conditions TO-220AC (Only) TO-220AC, TO-263AB TO-220AC FullPak Rating 62 1.5 3.7 Units °C/W °C/W °C/W 2 www.powerint.com Rev 1.10 01/11 LXA08T600/8B600/8FP600 Electrical Specifications at TJ= 25 °C (unless otherwise specified) Symbol IR VF CJ tRR QRR IRRM S Parameter Reverse current Forward voltage Junction capacitance Reverse recovery time Reverse recovery charge Maximum reverse recovery current Conditions VR = 600V, TJ = 25 °C VR = 600V, TJ = 125 °C IF = 8A, TJ = 25 °C IF = 8A, TJ = 150 °C VR = 10V, 1 MHz dI/dt =200 A/µs VR=400V, IF=8 A dI/dt =200 A/µs VR=400V, IF=8 A dI/dt =200 A/µs VR=400V, IF=8 A TJ=25 °C TJ=125 °C TJ=25 °C TJ =125 °C TJ =25 °C TJ=125 °C TJ =25 °C TJ=125 °C Min - Typ 0.85 2.35 2.1 40 21.5 33 31 82 2.2 3.5 0.74 0.55 Max 250 2.94 34 53 (1) 48 130 (1) 2.8 4.5 (1) - Units µA mA V V pF ns ns nC nC A A DC Characteristics Dynamic Characteristics t Softness factor = b ta dI/dt =200 A/µs VR=400V, IF=8 A Note to component engineers: X-Series diodes employ Schottky technologies in their design and construction. Therefore, Component Engineers should plan their test setups to be similar to those for traditional Schottky test setups. (For additional details, see Application Note AN-300.) VR L1 D1 DUT IF dIF/dt 0 tRR ta tb 0.1xIRRM IRRM 15V Pulse generator + Rg Q1 Figure 1. Reverse Recovery Definitions Figure 2. Reverse Recovery Test Circuit 3 Rev 1.10 01/11 www.powerint.com LXA08T600/8B600/8FP600 Electrical Specifications at TJ= 25 °C (unless otherwise specified) 24 22 20 18 16 14 12 10 8 6 4 2 0 0.0 0.5 1.0 1.5 160 140 Tj=125C Cj ( pF) 120 100 80 60 40 20 0 IF (A) Tj=25C 2.0 VF (V) 2.5 3.0 3.5 4.0 0 20 40 60 80 100 120 140 160 180 VR (V) Figure 3. Typical IF vs VF dI/dt=1000A/us Figure 4. Typical Cj vs VR dI/dt=200A/us 160 140 120 QRR (nC) 40 35 dI/dt=500A/us tRR (ns) 30 25 20 15 10 5 dI/dt=500A/us 100 80 60 40 20 0 2 4 6 IF (A) 8 10 12 14 dI/dt=200A/us dI/dt=1000A/us 0 2 4 6 IF (A) 8 10 12 14 Figure 5. Typical QRR vs IF at TJ = 125 °C 25 20 I F (A V) ( A) 15 10 5 0 25 50 75 100 o Figure 6. Typical tRR vs IF at TJ = 125 °C 100 90 TO-220 & TO-263 80 70 P (W) 60 50 40 30 20 10 0 125 150 25 50 75 100 o TO-220 & TO-263 FullPak FullPak 125 150 Case Temperature, TC ( C) Case Temperature, TC ( C) Figure 7. DC Current Derating Curve Figure 8. Power Derating Curve 4 www.powerint.com Rev 1.10 01/11 LXA08T600/8B600/8FP600 55 50 45 40 35 30 25 20 15 10 5 0 25 50 75 100 T C(°C) 125 Duty=10% Duty=30% Duty=50% DC 30 25 20 IF (PEAK) (A) 15 10 5 0 Duty=10% Duty=30% Duty=50% DC IF (PEA K) (A ) 150 25 50 75 100 T C(°C) 125 150 Figure 9. IF(PEAK) vs TC, f=70 kHz, TO-220 and TO-263 Figure 10. IF(PEAK) vs TC, f=70 kHz, FullPak LXA08T600, LXA08B600 1 D= 0.5 D = 0.3 0.1 Zth(j-c)/Rth(j-c) D= 0.1 D= 0.05 D= 0.02 D= 0.01 0.01 D= 0.005 D= 0.002 Single Pulse 0.001 1.E-06 1.E-05 1.E-04 1.E-03 t1(sec) 1.E-02 1.E-01 1.E+00 Figure 11. Normalized Maximum Transient Thermal Impedance, TO-220 and TO-263 5 Rev 1.10 01/11 www.powerint.com LXA08T600/8B600/8FP600 LXA08FP600 1 D= 0.5 D = 0.3 0.1 D= 0.1 D= 0.05 Zth(j-c)/Rth(j-c) D= 0.02 0.01 D= 0.01 D= 0.005 D= 0.002 0.001 Single Pulse 0.0001 1.E-06 1.E-05 1.E-04 1.E-03 t1(sec) 1.E-02 1.E-01 1.E+00 1.E+01 Figure 12. Normalized Maximum Transient Thermal Impedance, FullPak 6 www.powerint.com Rev 1.10 01/11 LXA08T600/8B600/8FP600 Dimensional Outline Drawings TO-220AC Millimeters Dim A A1 A2 C D E E1 F F1 H H1 H2 H3 H4 L L1 MIN MAX 4.32 1.14 2.03 0.34 9.65 2.49 4.98 0.508 1.14 14.71 5.84 8.51 3.53 2.54 12.70 - 4.70 1.40 2.79 0.610 10.67 2.59 5.18 1.016 1.78 16.51 6.55 9.25 3.96 3.05 14.22 6.35 FullPak D H4 H3 H1 H H2 A A1 Dim A A1 A2 C D E E1 Millimeters MIN MAX 4.54 2.57 2.51 0.42 10.25 4.80 2.83 2.62 0.58 10.72 2.54 (BSC) 5.08 (BSC) 0.624 1.10 15.86 6.06 9.55 2.95 3.15 13.33 3.18 0.776 1.65 16.12 6.56 9.81 3.05 3.25 14.18 3.43 F1 L1 F F1 H L F E E1 C A2 H1 H2 H3 H4 L L1 7 Rev 1.10 01/11 www.powerint.com LXA08T600/8B600/8FP600 TO-263AB Millimeters Dim A A1 A2 b b2 c2 D E e H L L1 L2 L3 L4 Θ Θ1 Θ2 MIN 4.40 0.00 2.59 0.77 1.23 1.22 9.05 10.06 2.54 BSC 14.70 2.00 1.17 – 0.25 BSC 2.00 BSC 0° 5° 1° MAX 4.70 0.25 2.79 0.90 1.36 1.32 9.25 10.26 2.54 BSC 15.50 2.60 1.40 1.75 0.25 BSC 2.00 BSC 8° 9° 5° Mechanical Mounting Method Screw through hole in package tab Clamp against package body Maximum Torque / Pressure specification 1 Newton Meter (nm) or 8.8 inch-pounds (lb-in) 12.3 kilogram-force per square centimeter (kgf/cm2) or 175 lbf/in2 Soldering time and temperature: This product has been designed for use with hightemperature, lead-free solder. The component leads can be subjected to a maximum temperature of 300 °C, for up to 10 seconds. See Application Note AN-303, for more details. Ordering Information Part Number LXA08T600, LXA08FP600 LXA08B600 Package TO-220AC, FullPak TO-263AB Packing 50 units/tube 800 units/reel The information contained in this document is subject to change without notice. 8 www.powerint.com Rev 1.10 01/11 LXA08T600/8B600/8FP600 Revision 1.9 1.10 Notes Released by Qspeed Converted to Power Integrations Document Date 06/10 01/11 9 Rev 1.10 01/11 www.powerint.com LXA08T600/8B600/8FP600 For the latest updates, visit our website: www.powerint.com Power Integrations reserves the right to make changes to its products at any time to improve reliability or manufacturability. Power Integrations does not assume any liability arising from the use of any device or circuit described herein. POWER INTEGRATIONS MAKES NO WARRANTY HEREIN AND SPECIFICALLY DISCLAIMS ALL WARRANTIES INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. PATENT INFORMATION The products and applications illustrated herein (including transformer construction and circuits external to the products) may be covered by one or more U.S. and foreign patents, or potentially by pending U.S. and foreign patent applications assigned to Power Integrations. A complete list of Power Integrations’ patents may be found at www.powerint.com. Power Integrations grants its customers a license under certain patent rights as set forth at http://www.powerint.com/ip.htm. The PI Logo, TOPSwitch, TinySwitch, LinkSwitch, DPA-Switch, PeakSwitch, CAPZero, SENZero, LinkZero, HiperPFS, HiperTFS, Qspeed, EcoSmart, Clampless, E-Shield, Filterfuse, StackFET, PI Expert and PI FACTS are trademarks of Power Integrations, Inc. Other trademarks are property of their respective companies. ©Copyright 2011 Power Integrations, Inc. Power Integrations Worldwide Sales Support Locations WORLD HEADQUARTERS 5245 Hellyer Avenue San Jose, CA 95138, USA. Main: +1-408-414-9200 Customer Service: Phone: +1-408-414-9665 Fax: +1-408-414-9765 e-mail: usasales@powerint.com CHINA (SHANGHAI) Rm 1601/1610, Tower 1 Kerry Everbright City No. 218 Tianmu Road West Shanghai, P.R.C. 200070 Phone: +86-021-6354-6323 Fax: +86-021-6354-6325 e-mail: chinasales@powerint.com CHINA (SHENZHEN) th Rm A, B & C 4 Floor, Block C, Electronics Science and Technology Building 2070 Shennan Zhong Road Shenzhen, Guangdong, P.R.C. 518031 Phone: +86-755-8379-3243 Fax: +86-755-8379-5828 e-mail: chinasales@powerint.com GERMANY Rueckertstrasse 3 D-80336, Munich Germany Phone: +49-89-5527-3911 Fax: +49-89-5527-3920 e-mail: eurosales@powerint.com JAPAN Kosei Dai-3 Building 2-12-11, Shin-Yokohama, Kohoku-ku, Yokohama-shi, Kanagawa 222-0033 Japan Phone: +81-45-471-1021 Fax: +81-45-471-3717 e-mail: japansales@powerint.com KOREA RM 602, 6FL Korea City Air Terminal B/D, 159-6 Samsung-Dong, Kangnam-Gu, Seoul, 135-728 Korea Phone: +82-2-2016-6610 Fax: +82-2-2016-6630 e-mail: koreasales@powerint.com SINGAPORE 51 Newton Road, #19-01/05 Goldhill Plaza Singapore, 308900 Phone: +65-6358-2160 Fax: +65-6358-2015 e-mail: singaporesales@powerint.com TAIWAN 5F, No. 318, Nei Hu Rd., Sec. 1 Nei Hu District Taipei 114, Taiwan R.O.C. Phone: +886-2-2659-4570 Fax: +886-2-2659-4550 e-mail: taiwansales@powerint.com INDIA th #1, 14 Main Road Vasanthanagar Bangalore-560052 India Phone: +91-80-4113-8020 Fax: +91-80-4113-8023 e-mail: indiasales@powerint.com ITALY Via De Amicis 2 20091 Bresso MI Italy Phone: +39-028-928-6000 Fax: +39-028-928-6009 e-mail: eurosales@powerint.com EUROPE HQ 1st Floor, St. James’s House East Street, Farnham Surrey GU9 7TJ United Kingdom Phone: +44 (0) 1252-730-141 Fax: +44 (0) 1252-727-689 e-mail: eurosales@powerint.com APPLICATIONS HOTLINE World Wide +1-408-414-9660 APPLICATIONS FAX World Wide +1-408-414-9760 10 www.powerint.com Rev 1.10 01/11