PSB15

SLIM-PACTM Single Phase Rectifier Bridge Preliminary Data Sheet VRSM VRRM Type VDSM VDRM (V) (V) 700 600 PSB 15/06 900 800 PSB 15/08 1300 1200 PSB 15/12 PSB 15 IdAV VRRM = 21 A = 600-1200 V + ~A ~N K Features Symbol I*dAV IFSM Test Conditions TC = 100 °C, (per module) TVJ = 45 °C VR = 0 TVJ = TVJM VR = 0 TVJ = 45 °C VR = 0 TVJ = TVJM VR = 0 Maximum Ratings 21 100 106 85 90 50 47 36 33 A A A A A A²s A²s A²s A²s °C °C °C V∼ V∼ t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine • • • • • • Package with DCB ceramic base plate Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 ∫ i2 dt Applications TVJ TVJM Tstg VISOL Md -40... + 150 150 -40... + 125 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA Mounting torque typ. t=1s (M4) 2500 3000 1.5 - 1.8 14 - 16 10 • • • • Supplies for DC power equipment Input rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages Weight Nm lb.in. g • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Symbol IR VF VTO rT RthJC RthJH ds dA a Test Conditions VR = VRRM, TVJ = TVJM VR = VRRM, TVJ = 25°C IF = 7 A, TVJ = 25 °C For power-loss calculations only per diode; DC per module per diode; DC per module Creeping distance on surface Creeping distance in air Max. allowable acceleration Characteristic Value ≤ ≤ ≤ 0.3 5 1.12 0.8 40 2.3 0.575 2.8 0.7 8.2 9.7 50 mA mA V V mΩ K/W K/W K/W K/W mm mm m/s² Package style and outline Dimensions in mm (1mm = 0.0394“) R2,15 R0,75 0,5 11,0+-0,2 Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output 1 39 0,2 47+-0,2 5 POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20  2005 POWERSEM reserves the right to change limits, test conditions and dimensions 18 -0,3 0,3 21,6+-0,3 0,2 30,3+-0,2 + 0,3