PSBH54

ECO-PACTM 3 Single Phase Half Controlled Rectifier Bridge, B2HK Preliminary Data Sheet PSBH 54 IdAV = 56 A VRRM= 800-1600 V VRSM VDSM (V) 900 1300 1500 1700 VRRM VDRM (V) 800 1200 1400 1600 Type + ~ ~ - PSBH 54/08 PSBH 54/12 PSBH 54/14 PSBH 54/16 ECO-PACTM 3 Symbol IdAV ITSM Test Conditions TC = 85 °C; per module TVJ = 45 °C VR = 0 VR = 0 TVJ = 45 °C VR = 0 VR = 0 Maximum Ratings 56 550 600 490 540 1500 1490 1200 1210 150 A A A A A A²s A²s A²s A²s A/µs Features t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine (50 Hz), sine t = 8.3 ms (60 Hz), sine TVJ = 125 °C t = 10 ms ∫ i2 dt • • • • • • Package with DCB ceramic base plate Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL Release applied TVJ = 125 °C t = 10 ms Applications (di/dt)cr TVJ = 125 °C repetitive, IT = 50 A f=50Hz, tP=200µs VD=2/3VDRM IG=0.3 A non repetitive,IT = 1/2 IdAV 500 1000 ≤ ≤ 10 5 0.5 10 -40... + 125 125 -40... + 125 A/µs V/µs W W W V °C °C °C V∼ V∼ Nm lb.in. g diG/dt=0.3A/µs • • • • Supplies for DC power equipment Imput rectifier for PWM inverter Battery DC power supplies Field supply for DC motors (dv/dt)cr PGM PGAVM VRGM TVJ TVJM Tstg VISOL Md TVJ = 125 °C VD=2/3VDRM RGK= ∞, method 1 (linear voltage rise) TVJ = 125 °C tP=30µs IT =ITAVM tP=300µs Advantages • • • • • Easy to mount with four screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA t=1s Mounting torque (M4) typ. 2500 3000 1.5 - 2.0 14 - 18 46 Weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated  2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 3 Symbol ID, I R VF,VT VTO rT VGT IGT VGD IGD IL IH tgd tq RthJC RthJH ds dA a Test Conditions IT = 80 A, TVJ = 25 °C Characteristic Value ≤ 5 0.85 11 ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ 1.5 1.6 100 200 0.2 5 450 200 2 250 0.8 0.2 1.1 0.183 11.2 11.2 50 mA V V mΩ V V mA mA V mA mA mA µs µs K/W K/W K/W K/W mm mm m/s² ≤ 1.64 TVJ = 125°C, VR = VRRM, VD=VDRM For power-loss calculations only VD=6V VD=6V TVJ= 125°C TVJ= 125°C TVJ= 25°C TVJ=-40°C TVJ= 25°C TVJ=-40°C VD=2/3VDRM VD=2/3VDRM TVJ= 25°C, tP=10µs, VD=6V IG=0.45A, diG/dt=0.45A/µs TVJ= 25°C, VD=6V, RGK= ∞ TVJ= 25°C, VD=1/2VDRM IG=0.45A, diG/dt=0.45A/µs TVJ= TVJM; IT=20A; tp=200µs;di/dt=-10A/µs VR=100V; dv/dt=15V/µs; VD=2/3VDRM per thyristor; DC per module per thyristor; DC per module Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) Max. allowable acceleration Package style and outline Dimensions in mm (1mm = 0.0394“)  2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20