HMA480272T016-ZHC

TECH. CORP. SPECIFICATIONS CUSTOMER : CNO003 SAMPLE CODE : SMA480272T016-ZHC MASS PRODUCTION CODE : HMA480272T016-ZHC SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 003 DRAWING NO. (Ver.) : LMD- HMA480272T016-ZHC(Ver.002) PACKAGING NO. (Ver.) : PKG- HMA480272T016-ZHC(Ver.001) Customer Approved Date: Approved Checked Designer 林裘中 Daniel Lin 呂清溪 Marcs Lu 陳漢霖 Hans Chen POWERTIP 2022.01.11 □ ■ TW RD APR Preliminary specification for design input Specification for sample approval POWERTIP TECH. CORP. Headquarters: No.8, 6th Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: sales@powertip.com.tw FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 03/03/2021 01 001 Preliminary - Hans 04/08/2021 01 002 Modify Pin Description 12 Hans 003 1. First Sample 2. Add J13 Connector 3. Modify Board Size & Add J13 13 Hans 12/01/2021 01 HMA480272T016-ZHC Appendix Page2 SPEC Ver.01 Edi.003 CONTENTS 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics 2. MODULE STRUCTURE 2.1 2.2 Counter Drawing Interface Pin Description 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 5.2 5.3 5.4 Safety Handling Storage Terms of Warranty APPENDIX 1. Drawing 2. PKG Drawing HMA480272T016-ZHC Page3 SPEC Ver.01 Edi.003 1. SPECIFICATIONS 1.1 Features Hardware CPU Display I/O Power Input RISC Processor STM32H750 480 MHz, ARM Cortex-M7 RAM 16MB SDRAM Flash 32MB QSPI FLASH 8GB eMMC External Storage 1 x Micro SD (max. 32G) Resolution 480 *3 (RGB) * 272 Dots Viewing Direction Full Viewing Angle Interface Parallel RGB 24 bits USB 1 x USB2.0 Device Serial 1 x UART, 1 x SPI, 1 x I2C, 1 x CAN RMII 1 x Ethernet DC 5V Note: 1. Support Micro USB Power Supply. 2. Support USB Device Full Speed. 3. Support CAN Bus (Compatible with ISO11898-2). 4. Support Ethernet (10BASE-T / 100BASE-T). 5. Support RTC. HMA480272T016-ZHC Page4 SPEC Ver.01 Edi.003 1. 1.2 Mechanical Specifications 1.3 Item Standard Value Unit Outline Dimension 113.2(W) x 73.2(L) x 13.5(H) MAX mm Active Area 95.04 (W) * 53.856 (L) mm Absolute Maximum Ratings Ta = 25℃ 1.4 Item Symbol Condition Min. Max. Unit Power Supply VIN — 4.5 6.0 V Operating Temperature TOP — -20 70 °C Storage Temperature TST — -30 80 °C Humidity HD Ta=60 ℃ 10 90 %RH DC Electrical Characteristics Ta = 25℃ Item Sym bol Condition Min. Typ. Max. Unit Power Supply Voltage VIN - 4.5 5 5.5 V Power Supply Voltage of RTC VBAT - 2.0 3.6 V Power Supply Current IIN VIN = 5V - 510 - mA Power Consumption of System PIN VIN = 5V - 2.55 - W High-Level voltage of digital input VIH - 2.3 - - V Low-Level voltage of digital input VIL - - - 0.9 V High level voltage of digital output VOH - 2.4 - - V Low level voltage of digital output VOL - - - 0.4 V HMA480272T016-ZHC Page5 SPEC Ver.01 Edi.003 1.5 Optical Characteristics VDD=3.3V, Ta=25°C Item Symbol Condition Min. Typ. Response time Tr+Tf Ta = 25°C θX, θY = 0° - 38 57 - 80 - - 80 - - 80 - Viewing angle θY+ Bottom θY- Left θX- Right θX+ - 80 - CR 650 800 - X 0.24 0.29 0.34 Y 0.29 0.34 0.39 0.55 0.60 0.65 0.30 0.35 0.40 X 0.30 0.35 0.40 Y 0.54 0.59 0.64 X 0.11 0.16 0.21 Y 0.09 0.14 0.19 White X Red Y Green Blue CR ≥ 10 Ta = 25°C θX , θY = 0° Average Brightness Pattern=white display (With LCD )*1 IF PWM=”High” (Duty=100%) 650 800 - Uniformity (With LCD )*2 △B PWM=”High” (Duty=100%) 70 - - HMA480272T016-ZHC ms Top Contrast ratio Color of CIE Coordinate （With B/L） Max. unit Note 2 Deg. Note 4 Note 3 - Note1 cd/m2 Note1 % Page6 SPEC Note1 Ver.01 Edi.003 Note 1: *1: △B=B(min) / B(max) * 100% *2: Measurement Condition for Optical Characteristics: a: Environment: 25℃±5℃ / 60±20%R.H, no wind, dark room below 10 Lux at typical lamp current and typical operating frequency b: Measurement Distance: 500 ± 50 ㎜, (θ= 0°) c: Equipment: TOPCON BM-7 fast, ( field 1°), after 10 minutes operation d: The uncertainty of the C.I.E coordinate measurement ±0.01, Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 9 θθ 500 ㎜ LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1° by Topcon luminance meter BM-7, after 10 minutes operation (module) Note 2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white” (falling time) and from “white” to “black” (rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Normally White "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr HMA480272T016-ZHC Tf Page7 SPEC Ver.01 Edi.003 Normally Black "Black" "White" "Black" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note 3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note 4: Definition of viewing angle: Refer to figure as below: θ X = θ Y = 0° 12H Φ = 180 ° θY- Φ = 270 ° θ X - = 90 ° θY+ Y+ X- θX- θX+ Φ = 90 ° θ X + = 90 ° Φ Y 6H Φ=0° θ Y - = 90 ° HMA480272T016-ZHC θ Y + = 90 ° X+ - Page8 SPEC Ver.01 Edi.003 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 Mechanical Diagram * See Appendix 2.1.2 Block Diagram HMA480272T016-ZHC Page9 SPEC Ver.01 Edi.003 2.2 Interface Pin Description JT1 --- JTAG (Wafer Pitch1.25mm 6pin) Pin No. Symbol Type DESCRIPTION 1 PA15 IO General Purpose I/O, Port A [15]. 2 PA8 IO General Purpose I/O, Port A [8]. 3 RESETINn 4 JTMS/SWDIO I/O 5 JTCK/SWCLK I JTAG test clock / Serial wire clock. 6 GND P Ground. I JTAG test reset. JTAG test mode select / Serial wire data in/out. J3 --- CAN Bus (Wafer Pitch1.25mm 2pin) Pin No. Symbol Type DESCRIPTION 1 CAN H DS High Level CAN Bus Line. 2 CAN L DS Low Level CAN Bus Line. J4 --- USB 2.0 Device MICRO USB Pin No. Symbol Type 1 VBUS5V P 2 D- DS Data – (Data M) 3 D+ DS Data + (Data P) 4 ID - HMA480272T016-ZHC DESCRIPTION +5.0V Not Used. Page10 SPEC Ver.01 Edi.003 Pin No. 5 Symbol GND Type P DESCRIPTION Ground J8 --- RTC (Wafer Pitch1.25mm 2pin) Pin No. Symbol Type DESCRIPTION 1 VBAT P Power Supply for RTC. 2 GND P Ground. J6 --- Ethernet (Wafer Pitch1.25mm 10pin) Pin No. Symbol Type DESCRIPTION 1 GND P Ground. 2 GND P Ground. 3 LED_ACK O Link Speed LED Indication. (See Note 1) 4 RXD- DS Receive Negative. 5 RXD+ DS Receive Positive. 6 TXD- DS Transmit Negative. 7 TXD+ DS Transmit Positive. 8 LED_LINK O Link Activity LED Indication. (See Note 2) 9 GND P Ground. 10 VDD3V3 P Power Supply (+3.3V). Note 1: This pin is driven active when the operating speed is 100Mbps. It is inactive when the operating speed is 10Mbps or during line isolation. Note 2: This pin is driven active when a valid link is detected and blinks when activity is detected. HMA480272T016-ZHC Page11 SPEC Ver.01 Edi.003 J10 --- P05D00071-01 Interface Reserved (Pitch 0.5mm 30pin Double contact) Pin No. Symbol Type DESCRIPTION 1 GND P Ground. 2 PG3 IO General Purpose I/O, Port G [3]. 3 PB2 IO General Purpose I/O, Port B [2]. 4 NC - Not Used. 5 GND P Ground. 6 I2C_CLK IO I2C2 CLK, Function Reserved. 7 GND P Ground. 8 I2C_DAT IO I2C2 DAT, Function Reserved. 9 GND P Ground. 10 SPI_CLK IO SPI1 CLK, Function Reserved. 11 GND P Ground. 12 SPI_MISO IO SPI1 MISO, Function Reserved. 13 SPI_MOSI IO SPI1 MOSI, Function Reserved. 14 GND P Ground. 15 SPI_CS0 IO SPI1 CS0, Function Reserved. 16 GND P Ground. 17 PH6 IO General Purpose I/O, Port H [6]. 18 PH7 IO General Purpose I/O, Port H [7]. 19 PH5 IO General Purpose I/O, Port H [5]. 20 PB1 IO General Purpose I/O, Port B [1]. 21 GND P Ground. 22 RESETINn I System Reset, Active Low. 23 UART_TXD IO USART2 TX, Function Reserved. 24 UART_RXD IO USART2 RX, Function Reserved. 25 GND P Ground. 26 VIN P Power Supply (+5.0V). 27 VIN P Power Supply (+5.0V). 28 UART_RTS IO USART2 RTS, Function Reserved. 29 UART_CTS IO USART2 CTS, Function Reserved. 30 GND P Ground. HMA480272T016-ZHC Page12 SPEC Ver.01 Edi.003 J13 --- Power Input (Wafer Pitch1.25mm 4pin) Pin No. Symbol Type DESCRIPTION 1 VBUS5V P +5.0V 2 VBUS5V P +5.0V 3 GND P Ground 4 GND P Ground HMA480272T016-ZHC Page13 SPEC Ver.01 Edi.003 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out HMA480272T016-ZHC run & Reliability test Inspection NG Shipment Ship out Page14 SPEC Ver.01 Edi.003 Item Customer Sales Info Claim R&D Manufact Product Inventory Purchase uring control control Q.A Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management HMA480272T016-ZHC 2. Process improvement proposal 4. Education And Training Activities Page15 SPEC Ver.01 Edi.003 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60 +60℃ ℃ / 90 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) Temperature Cycling Storage Test -30℃ → +25℃ 25℃ → +80℃ → +25℃ 25℃ (30 30mins) (5 30mins) (5 30 5mins) (30 30 5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. 4 5 Vibration Test (Packaged) TEST CONDITION 1. Sine wave 10 10～ ～55 Hz frequency (1 1 min) 2. The amplitude of vibration :1.5 1.5 mm 3. Each direction (X、 、Y、 、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 6 Drop Test (Packaged) Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction :※ ※1 corner / 3 edges / 6 sides each 1times HMA480272T016-ZHC Page16 SPEC Ver.01 Edi.003 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks, be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes, please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 5.2.10 5.2.11 5.2.12 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI－When working with the module, be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So, please handle it very carefully, do not touch, push or rub the exposed polarizing with anything harder than an HB pencil lead (glass, tweezers, etc.) Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate. Do not touch the display area with bare hands, this will stain the display area. Do not use ketonic solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320 ± 10℃ and 3 ~ 5 sec. To avoid liquid (include organic solvent) stained on LCM. Caution! (LCM products with Capacitive Touch Panel) Strong EMI-sources such as switch-mode power supplies (SPS) can lead to touch malfunction (e.g., ghost-touches). Therefore, the touch needs to be thoroughly tested inside the target application. CAUTION: Continuously displaying same static image will result in high possibility of image sticking/image burn-in effect due to TFT panel characteristic. Double-sided tape designed to be attached with the customer’s mechanical device, please follow up the rules and regulations published by the original manufacturer of double-side tape for the attachment operation. 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25℃ ± 5℃ and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush, shake, or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment, fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. HMA480272T016-ZHC Page17 SPEC Ver.01 Edi.003 B C D PART NO: A 007 HMA480272T016-ZHC Nini DATE 2021/03/26 2021/12/02 LCD MODULE DRAWING TITLE: LMD-HMA480272T016-ZHC DRAWING NAME : 006 005 004 Nini 003 002 MODIFY BOARD SIZE & ADD J13 REVISER REV BY 001 NEW DRAWING E F G TECHNOLOGY Scale Unit 1/1 FIT MM Quantity Thickness Material H Pr T Le n o lera ecis n (m mgth(M ce ion in) ) CORPORATION Page Surface 久 正 光 電 股 份 有 限 公 司 POWERTIP Marcs Lu Nini Chen Check Daniel Lin Design Approve 1 2 3 4 5 6 Precision Level -