HNA800480T013IHC09

TECH. CORP. SPECIFICATIONS CUSTOMER : CBE005 SAMPLE CODE : SNA800480T013IHC09 MASS PRODUCTION CODE : HNA800480T013IHC09 SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 002 DRAWING NO. (Ver.) : LMD- HNA800480T013IHC09 (Ver.001) PACKAGING NO. (Ver.) : PKG- HNA800480T013IHC09 (Ver.001) Customer Approved Date: Approved Checked Designer 林裘中 Daniel Lin 呂清溪 Marcs Lu 廖志豪 Rex Liao POWERTIP 2020.02.03 □ Preliminary specification for design input ■ Specification for sample approval TW RD APR POWERTIP TECH. CORP. Headquarters: No.8, 6th Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: sales@powertip.com.tw FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 11/25/2019 01 001 New Drawing. - Rex 02/03/2020 01 002 New Sample. - Rex HNA800480T013IHC09 Page2 SAMPLE Ver.01 SPEC Edi.002 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：1.LCM Drawing HNA800480T013IHC09 Page3 SAMPLE Ver.01 SPEC Edi.002 1. SPECIFICATIONS 1.1 Features Hardware CPU Memory RISC Processor N32926 (ARM926EJ-S) 64MB DDR2 SDRAM On Board Flash 1Gb NAND Flash External Storage * 1x Micro SD (max. 32G) USB 1x USB2.0 Device Serial 1 x UART I/O LCD Display Item Standard Value Display Resolution 800 * 3 (RGB) * 480 Dots LCD Type a-Si TFT , Normally white , Transmissive type Touch Panel Projected Capacitive Touch Screen size(inch) 7.0 inch Color configuration RGB Vertical Strip Backlight Type White LED B/L ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer website : http://www.powertip.com.tw/news_detail.php?Key=1&cID=1 Note: 1. Support PWM Signal Output. (5kHz, Duty Cycle: 256 Step) 2. Support JPEG Codec. 3. Support H.264 & MJPEG Codec 4. Support Video Data Processor (VPE) 5. Support RTC HNA800480T013IHC09 Page4 SAMPLE Ver.01 SPEC Edi.002 PS: This product built-in Powertip communication protocol system firmware. It manipulates the GUI contents that generated by Powertip Graphic Editor software. 1.2 Mechanical Specifications Item Standard Value Outline Dimension 186.8(W) x 110.56(L) x 16.5 max. (H) Active Area 154.08 (W) x 85.92(L) Unit mm Note : For detailed information please refer to drawing HNA800480T013IHC09 Page5 SAMPLE Ver.01 SPEC Edi.002 1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply VIN GND=0 -0.3 6.0 V Operating Temperature TOP (Ts) Note 1 -20 70 °C Storage Temperature TST (Ta) Note 2 -30 80 °C Remark - The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme case, the product may be permanently destroyed. Note 1：Ts is the temperature of panel’s surface. Note 2：Ta is the ambient temperature of samples. 1.4 DC Electrical Characteristics Ta = 25℃ Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage VIN - 4.8 5.0 5.5 V Power Supply Voltage of RTC VBAT - 2.0 - 3.6 V Power Supply Current *1 IIN VIN = 5.0V - 1.5 2.0 A Power Consumption of System PIN VIN = 5.0V - - 10.0 W IO High-Level input voltage VIH - 2.0 - V3V3+0.3 V IO Low-Level input voltage VIL - - - 0.8 V IO High-Level output voltage VOH - 2.4 - - V IO Low-Level output voltage VOL - - - 0.4 V HNA800480T013IHC09 Page6 SAMPLE Ver.01 SPEC Edi.002 1.5 Optical Characteristics Ta=25°C Item Symbol Condition Min. Typ. Max. unit - Tr+Tf 25℃ - - 25 50 ms - Top θY+ 60 - Bottom θY- 60 - Left θX- 60 - Deg. Note 4 Right θX+ 60 - Note 3 - Note1 Response time Viewing angle Contrast ratio White Red Color of CIE Coordinate （With B/L & T/P） Green Blue CR ≥ 10 CR 500 600 - X 0.23 0.28 0.33 Y 0.27 0.32 0.37 0.52 0.57 0.62 0.31 0.36 0.41 0.29 0.34 0.39 Y 0.55 0.60 0.65 X 0.09 0.14 0.19 Y 0.02 0.07 0.12 X Y X (Ta = 25°C θX , θY = 0 Average Brightness Pattern=white display (With T/P)*1 IV PWM=”High” (Duty=100%) 680 850 - Uniformity (With T/P)*2 △B PWM=”High” (Duty=100%) 70 - - HNA800480T013IHC09 Page7 cd/m2 Note1 % Note1 SAMPLE Ver.01 SPEC Edi.002 Note 1: *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1 by Topcon luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Normally White "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr HNA800480T013IHC09 Tf Page8 SAMPLE Ver.01 SPEC Edi.002 Normally Black "Black" "White" "Black" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θ X = θ Y = 0° 12H Φ = 180 ° Φ = 270 ° θY- θY+ θ Y + = 90 ° θ X - = 90 ° X- Y+ θX- θX+ Φ = 90 ° Φ θ X + = 90 ° X+ Y6H Φ=0° θ Y - = 90 ° HNA800480T013IHC09 Page9 SAMPLE Ver.01 SPEC Edi.002 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 Mechanical Diagram * See Appendix 2.1.2 Block Diagram 800(RGB) * 480 Power Unit N32926 (ARM9) CTP USB Device*1 Micro SD 64MB DDR2 UART 1Gb Nand Flash GPIO Memory Unit 1Gb NAND Flash HNA800480T013IHC09 Page10 SAMPLE Ver.01 SPEC Edi.002 2.2 Interface Pin Description J8 --- I/O Pin No. Symbol Type DESCRIPTION 1 GND P Power ground. 2 GPG9 IO General Purpose I/O, Port G[9]. 3 GPG8 IO General Purpose I/O, Port G[8]. 4 NC - Not Used. 5 GND P Power ground. 6 NC - Not Used. 7 GND P Power ground. 8 NC - Not Used. 9 GND P Power ground. 10 GPG2 IO General Purpose I/O, Port G[2]. 11 GND P Power ground. 12 GPG4 IO General Purpose I/O, Port G[4]. 13 GPG5 IO General Purpose I/O, Port G[5]. 14 GND P Power ground. 15 GPG3 IO General Purpose I/O, Port G[3]. 16 GND P Power ground. 17 HPOUT_L A Connect to N32926 pin 102. 18 HPOUT_R A Connect to N32926 pin 101. 19 GPG7 IO General Purpose I/O, Port G[7]. 20 GPA11 IO General Purpose I/O, Port A[11]. 21 GND P Power ground. 22 RESETn I System reset signal input, active low. HNA800480T013IHC09 Page11 SAMPLE Ver.01 SPEC Edi.002 Pin No. Symbol Type 23 UART_RXD I UART port, receiver signal. 24 UART_TXD O UART port, transmitter signal. 25 GND P Power ground. 26 VIN P DC 5.0V Power Supply. 27 VIN P DC 5.0V Power Supply. 28 NC - Not Used. 29 NC - Not Used. 30 GND P Power ground. Function J9 --- USB 2.0 Device Micro USB type Pin No. Symbol Type DESCRIPTION 1 VUSB5V 2 D- DS Data – (Data M). 3 D+ DS Data + (Data P). 4 NC - Not Used. 5 GND P Ground. P USB +5.0V. J11 --- RTC POWER Pin No. Symbol Type Function 1 VBAT P Power Supply for RTC. 2 GND P Ground. HNA800480T013IHC09 Page12 SAMPLE Ver.01 SPEC Edi.002 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Q.A Manufactu Product Inventory Purchase ring control control Survey Request Project evaluation Inquiry Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot run & Reliability test Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out HNA800480T013IHC09 Inspection NG Shipment Ship out Page13 SAMPLE Ver.01 SPEC Edi.002 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management HNA800480T013IHC09 2. Process improvement proposal 4. Education And Training Activities Page14 SAMPLE Ver.01 SPEC Edi.002 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM TEST CONDITION 1 High Temperature Storage Test Keep in +70 ±2℃ 240 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -20 ±2℃ 240 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60℃ / 90% R.H duration for 240 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -20℃ → 4 5 Temperature Cycling Storage Test Vibration Test (Packaged) +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. 1. Sine wave 10～55 Hz frequency (1 min) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 6 Drop Test (Packaged) → +70℃ → +25℃ Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction :※1 corner / 3 edges / 6 sides each 1times HNA800480T013IHC09 Page15 SAMPLE Ver.01 SPEC Edi.002 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks, be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes, please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module, be sure to ground your body and any electrical equipment you may be using. 5.2.3 Do not remove the panel or frame from the module. 5.2.4 The polarizing plate of the display is very fragile. So, please handle it very carefully, do not touch, push or rub the exposed polarizing with anything harder than an HB pencil lead (glass, tweezers, etc.) 5.2.5 Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate. 5.2.6 Do not touch the display area with bare hands, this will stain the display area. 5.2.7 Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. 5.2.8 To control temperature and time of soldering is 320 ± 10°C and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM 5.2.10 Caution!( LCM products with Capacitive Touch Panel) Strong EMI-sources such as switch-mode power supplies (SMPS) can lead to touch malfunction (e.g. ghost-touches). Therefore, the touch needs to be thoroughly tested inside the target application. 5.2.11 CAUTION: Continuously displaying same static image will result in high possibility of image sticking/image burn-in effect due to TFT panel characteristic. 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25°C ± 5°C and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush, shake, or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment, fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. HNA800480T013IHC09 Page16 SAMPLE Ver.01 SPEC Edi.002 A B C DATE 2019/11/25 D LCD MODULE DRAWING TITLE: LMD-HNA800480T013IHC09 DRAWING NAME : PART NO: Nini 007 REVISER HNA800480T013IHC09 REV BY 006 005 004 003 002 001 NEW DRAWING E F G TECHNOLOGY Scale Unit 1/1 1:1 MM Quantity Thickness Material H Pr T Le n o lera ecis n (m mgth(M ce ion in ) ) CORPORATION Page Surface 久 正 光 電 股 份 有 限 公 司 POWERTIP Marcs Nini Check Daniel Design Approve 1 2 3 4 5 6 Precision Level -