P05D00063-01

TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : S05D00063-01 MASS PRODUCTION CODE : P05D00063-01 SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 001 DRAWING NO. (Ver.) : LMD- P05D00063-01 (Ver.001) PACKAGING NO. (Ver.) : PKG- P05D00063-01 (Ver.001) Customer Approved Date: Approved Checked Designer 林裘中 Daniel Lin 呂清溪 Marcs Lu 陳政佑 Cheney Chen □ Preliminary specification for design input ■ Specification for sample approval POWERTIP TECH. CORP. Headquarters: No.8, 6th Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: sales@powertip.com.tw FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) 8/9/2019 Ver. Edi. 01 001 Description Page Design by Preliminary SPEC - Cheney Total：17Page P05D00063-01 Page2 SPEC Ver.01 Edi.001 Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 5.2 5.3 5.4 Safety Handling Storage Terms of Warranty Appendix：1. Drawing Appendix：2. Packaging Specifications P05D00063-01 Page3 SPEC Ver.01 Edi.001 1. SPECIFICATIONS 1.1 Features Hardware CPU RISC Processor 64MB DDR2 SDRAM On Board Flash *1 1Gb NAND Flash 4GB eMMC (Option) External Storage *1 1x Micro SD (max. 32G) Resolution Up to 1024 RGB x 768 Touch Panel *2 Projected Capacitive Touch Interface Parallel RGB 16 bits USB 1x USB2.0 Device Serial 1 x UART DC 5.0V Memory Display N32926 (ARM926EJ-S) I/O Power Input Note: 1. Memory type (Option) will be setting by customer’s request. 2. Touch Panel Type will be setting by customer’s request. 3. Support PWM Signal Output. (5kHz, Duty Cycle: 256 Step) 4. Support JPEG Codec. 5. Support H.264 & MJPEG Codec 6. Support Video Data Processor (VPE) 7. Support RTC P05D00063-01 Page4 SPEC Ver.01 Edi.001 PS: Communication protocol system available on Jan 2019. Powertip Graphic Editor software available on July 2019. (support maximum resolution up to 1024x600) Front View NOTE︰If you have any request, please feel free to contact us. P05D00063-01 Page5 SPEC Ver.01 Edi.001 1. 1.2 Mechanical Specifications 2. 1.3 Item Standard Value Unit Outline Dimension 77.2(W) x 63.5(L) x 10.6(H) MAX mm Absolute Maximum Ratings Ta = 25℃ Item Symbol Condition Min. Max. Unit Power Supply VIN — -0.3 6.0 V Operating Temperature TOP — -20 70 °C Storage Temperature TST — -30 80 °C Humidity HD Ta=60 ℃ 10 90 %RH 1.4 DC Electrical Characteristics Ta = 25℃ Item Symbol Condition Min. Typ. Max. Unit Power Supply Voltage VIN - 4.8 5.0 5.5 V Power Supply Current *1 IIN VIN = 5.0V - 1.5 2.0 A Power Consumption of System PIN VIN = 5.0V - - 10 W IO High-Level input voltage VIH - 2.0 - V3V3+0.3 V IO Low-Level input voltage VIL - - - 0.8 V IO High-Level output voltage VOH - 2.4 - - V IO Low-Level output voltage VOL - - - 0.4 V Note 1: Power supply current with Powertip 7” LCM, PH800480T013-IHC P05D00063-01 Page6 SPEC Ver.01 Edi.001 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 Mechanical Diagram * See Appendix 2.1.2 Block Diagram 16bits RGB Resolution: Up to 1024x768 Power Unit N32926 Touch Panel (option) (ARM926EJ-S) UART USB Device x 1 Micro SD GPIO 64MB DDR2 Memory Unit 1. 1Gb Nand Flash 2. 4GB eMMC Flash (option) P05D00063-01 Page7 SPEC Ver.01 Edi.001 2.2 Interface Pin Description J8 --- I/O(Pitch0.5mm 6pin Double contact) Pin No. Symbol Type DESCRIPTION 1 GND P Power ground. 2 GPG9 P General Purpose I/O, Port G[9]. 3 NC - Not Used. 4 NC - Not Used. 5 GND P Power ground. 6 GPB13 IO General Purpose I/O, Port B[13]. 7 GND P Power ground. 8 GPB14 IO General Purpose I/O, Port B[14]. 9 GND P Power ground. 10 GPG2 IO General Purpose I/O, Port G[2]. 11 GND P Power ground. 12 GPG4 IO General Purpose I/O, Port G[4]. 13 GPG5 IO General Purpose I/O, Port G[5]. 14 GND P Power ground. 15 GPG3 IO General Purpose I/O, Port G[3]. 16 GND P Power ground. 17 HPOUT_L A Connect to N32926 pin 102. 18 HPOUT_R A Connect to N32926 pin 101. 19 GPG7 IO General Purpose I/O, Port G[7]. 20 NC - Not Used. 21 GND P Power ground. 22 RESETn I System reset signal input, active low. 23 UART_RXD I UART port, receiver signal. P05D00063-01 Page8 SPEC Ver.01 Edi.001 Pin No. Symbol Type Function 24 UART_TXD O UART port, transmitter signal. 25 GND P Power ground. 26 VIN P DC 5.0V Power Supply. 27 VIN P DC 5.0V Power Supply. 28 GPD3 IO General Purpose I/O, Port D[3]. 29 GPD4 IO General Purpose I/O, Port D[4]. 30 GND P Power ground. J9 --- USB 2.0 Device Micro USB type Pin No. Symbol Type P DESCRIPTION 1 VUSB5V USB +5.0V. 2 D- DS Data – (Data M). 3 D+ DS Data + (Data P). 4 NC - Not Used. 5 GND P Ground. J7 --- CTP (Pitch0.5mm 6pin Double contact) Pin No. Symbol Type Function 1 GND P Ground. 2 V3V3 P Power Supply. 3 I2C_SCL IO I2C SCL for CTP. 4 I2C_SDA IO I2C SDA for CTP. 5 CTP_INT I Interrupt Signal for CTP. 6 CTP_RST O Reset Signal for CTP. P05D00063-01 Page9 SPEC Ver.01 Edi.001 J2 --- TFT Signal Output (Pitch 0.5mm 50pin Double contact) Pin No. Symbol Type Function 1 GND P Ground. 2 V3V3 P Power Supply (+3.3V). 3 V3V3 P Power Supply (+3.3V). 4 V5V P Power Supply (+5.0V). 5 V5V P Power Supply (+5.0V). 6 PWM O PWM Signal. 7 GND P Ground. 8 NC - Not Used. 9 NC - Not Used. 10 NC - Not Used. 11 R3 O Red Data. 12 GND P Ground. 13 R4 O Red Data. 14 R5 O Red Data. 15 R6 O Red Data. 16 R7 O Red Data. 17 GND P Ground. 18 NC - Not Used. 19 NC - Not Used. 20 G2 O Green Data. 21 G3 O Green Data. 22 GND P Ground. 23 G4 O Green Data. 24 G5 O Green Data. 25 G6 O Green Data. 26 G7 O Green Data. 27 GND P Ground. 28 NC - Not Used. 29 NC - Not Used. 30 NC - Not Used. P05D00063-01 Page10 SPEC Ver.01 Edi.001 Pin No. Symbol Type Function 31 B3 O Blue Data. 32 GND P Ground. 33 B4 O Blue Data. 34 B5 O Blue Data. 35 B6 O Blue Data. 36 B7 O Blue Data. 37 GND P Ground. 38 HS O Line synchronization signal. Horizontal Sync. 39 VS O Frame synchronization signal. Vertical Sync. 40 GND P Ground. 41 DE O Data Enable. 42 GND P Power Ground. 43 DCLK O Sample clock. Data will be latched at the falling edge of DCLK. 44 GND P Power ground. 45 SPI_CS1 O SPI1 /CS1 Signal. 46 SPI1_MOS O SPI1 bus, MOSI signal 47 SPI1_CLK O SPI1 bus, clock signal 48 DIS_CTL O Display Enable Control. 49 /RESET O Reset Signal. 50 GND P Power ground. P05D00063-01 Page11 SPEC Ver.01 Edi.001 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Q.A Manufactu Product Inventory Purchase ring control control Survey Request Project evaluation Inquiry Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot run & Reliability test Pilot NG Run & Mass Product Verification OK Specification preparation Mass production OK Ship Out P05D00063-01 Inspection NG Shipment Ship out Page12 SPEC Ver.01 Edi.001 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities 3. Equipment calibration Activity 5. Standardization Management Q.A P05D00063-01 2. Process improvement proposal 4. Education And Training Activities Page13 SPEC Ver.01 Edi.001 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test Keep in +70 ±2℃ 240 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -20 ±2℃ 240 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60℃ / 90% R.H duration for 240 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) Temperature Cycling Storage Test -20℃ → +25℃ → +70℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. 4 5 Vibration Test (Packaged) TEST CONDITION 1. Sine wave 10～55 Hz frequency (1 min) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 6 Drop Test (Packaged) Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction :※1 corner / 3 edges / 6 sides each 1times P05D00063-01 Page14 SPEC Ver.01 Edi.001 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks, be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes, please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the 5.2.3 5.2.4 module, be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So, please handle it very carefully, do not touch, push or rub the exposed polarizing with anything harder 5.2.5 than an HB pencil lead (glass, tweezers, etc.) Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate. 5.2.6 5.2.7 5.2.8 Do not touch the display area with bare hands, this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM. 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush, shake, or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment, fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. P05D00063-01 Page15 SPEC Ver.01 Edi.001 Appendix: 1. Drawing P05D00063-01 Page16 SPEC Ver.01 Edi.001 Appendix: 2. Packaging Specifications P05D00063-01 Page17 SPEC Ver.01 Edi.001