800-10-059-65-001101

厂商：
PREDIP(瑞士匹斯迪)
封装：
-
描述：
CONN HEADER VERT 59POS 2.54MM

数据手册：

下载800-10-059-65-001101.pdf

立即购买

详情介绍
数据手册
价格&库存

800-10-059-65-001101 数据手册

PCB CONNECTORS 800-PP-NNN-65-001101 Single row 2.54 mm, Solderless compliant press-fit, Pin Ø 0.76 mm SERIES 800 Pin connectors, press-fit With compliant pin for solderless mount in PCB plated through holes. TECHNICAL SPECS.: Insulator Black glass filled polyester PCT-GF30-FR Flammability UL 94V-O Contact Bronze CuSn4Pb4Zn4 (C54400) Connecting pin Ø 0.76 mm Mechanical life Min. 500 cycles Rated current 3A Dielectric strength Min. 1000 V RMS PCB hole Ø 1 mm +0.09/-0.06 mm finished (1.15 ±0.025 mm drill) ORDERING INFORMATION: PP Plating code Termination Connecting pin 10* Gold 0.25 µm Gold 0.25 µm 80* Tin Tin V3 Tin Gold 0.75 µm * not for 800...-6B-002101NNN number of poles. Replace NNN with the requested number of poles, e.g. 800-10NNN-65-001101 for a single row version with 8 pins becomes 800-10-008-65-001101. PHONE PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com TECHNICAL ASSISTANCE GENERAL SPECIFICATIONS: The values listed below are general specs applying for PRECI-DIP socket and pin connectors. Please see individual catalog page for additional and product specific technical data. Operating temperature range -55 ... +125 °C Climatic category (IEC) 55/125/21 Operating humidity range annual mean 75 % Max working voltage 100 VRMS/150 VDC (2.54 mm grid) PRECI-DIP sockets are recognized by Underwriters Laboratories Inc. and listed under "Connectors for Use in Data, Signal, Control and Power Applications", File Nr. E174442 MECHANICAL CHARACTERISTICS: Clip retention Min. 40 N (no displacement under axial force applied) Contact (sleeve / clip) retention Min. 3.3 N acc. to MIL-DTL-83734, pt 4.6.4.2 ELECTRICAL CHARACTERISTICS: Insulation resistance between any two adjacent contacts Min. 10'000 M at 500 V AC Capacitance between any two adjacent contacts Max. 1 pF Air and creepage distances between any two adjacent contacts : SERIES mm 3xx/4xx/7xx 80x 83x 85x 86x 0.7 0.85 / 0.7 0.5 0.4 / 0.5 0.5 ENVIRONMENTAL CHARACTERISTICS: The sockets withstand the following environmental tests without mechanical and electrical defects: - Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16h - Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH, 1 cycle of 24 h - Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h - Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min - Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g, 1 octave/min, 10 cycles for each axis - Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis During the above two tests no contact interruption >50 ns does appear. - Solderability J-STD-002A, Test A, 245°C, 5 s solder alloy SnAg3.8Cu0.7 - Resistance to soldering heat J-STD-0020C, 260°C, 20 s - Moisture sensitivity J-STD-020C level 1 - Resistance to corrosion : 1) Salt spray test IEC 60068-2-11.Ka: 48 h 2) Sulfur dioxide (SO2) test IEC 60068-2-42 Kc: 96 h at 25 ppm SO2, 25 °C, 75 %rH 3) Hydrogen sulfide (H2S) test IEC 60068-2-43 Kd: 96 h at 12 ppm H2S, 25 °C, 75 %rH SOLDERLESS COMPLIANT PRESS-FIT CHARACTERISTICS: PRESS-FIT CHARACTERISTICS MEASURED ACC. TO IEC 60352-5 - Press-in force: 90 N max. (at min. hole dia.) / 65 N typ. - Push-out force: 30 N min. (at max. hole dia.) / 50 N typ. - Push-out 3rd cycle: 20 N min. (at max. hole dia.) PHONE PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com PCB HOLE DIMENSIONS - 2 mm grid: Finished hole Ø: 0.7 + 0.09/-0.06 mm | Drilled hole Ø: 0.8 ± 0.02 mm - 2.54 mm grid: Finished hole Ø: 1 + 0.09/-0.06 mm | Drilled hole Ø: 1.15 ± 0.02 mm PCB HOLE PLATING - PCB surface finish: Hole plating - Tin: 5-15 µm tin over min. 25 µm copper - Copper: min. 25 µm copper - Gold over nickel: 0.05-0.2 µm gold over 2.5-5 µm nickel over min. 25 µm copper PHONE PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com

下载 PDF

800-10-059-65-001101

物料型号：800-PP-NNN-65-001101，其中NNN代表所需引脚数量。

器件简介：单排2.54mm间距的无焊接压配合式引脚连接器，采用0.76mm直径的引脚。

引脚分配：Nx2.54mm，具体数量根据NNN确定。

参数特性： - 绝缘体材料：黑色玻璃填充聚酯PCT-GF30-FR，符合UL 94V-0标准。 - 接触材料：铜锡4磷4铅4锌（C54400）。 - 机械寿命：至少500次循环。 - 额定电流：3A。 - 介电强度：最小1000V RMS。

功能详解： - 操作温度范围：-55至+125°C。 - 气候类别：IEC 55/125/21。 - 工作电压：100V RMS/150V DC（2.54mm网格）。 - 环境测试：包括干热、湿热、冷热、热冲击、振动和冲击测试。

应用信息：PRECI-DIP插座被UL认可，适用于数据、信号、控制和电源应用。

封装信息： - 压入力：最大90N（最小孔径）/典型65N。 - 推出力：最小30N（最大孔径）/典型50N。 - 第三周期推出力：最小20N（最大孔径）。

订购信息： - PP电镀代码：10代表0.25um金层，80代表锡层，V3代表锡层和0.75um金层。 - 订购时需替换NNN为所需引脚数量。

PCB孔尺寸： - 2mm网格：完成孔径0.7 + 0.09/-0.06mm，钻孔径0.8 ± 0.02mm。 - 2.54mm网格：完成孔径1 + 0.09/-0.06mm，钻孔径1.15 ± 0.02mm。

PCB孔电镀： - 锡：5-15µm锡层覆盖至少25µm铜层。 - 铜：至少25µm铜层。 - 金上镍：0.05-0.2µm金层覆盖2.5-5µm镍层，至少25µm铜层。

800-10-059-65-001101 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“800-10-059-65-001101”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

800-10-059-65-001101

相关技术文章