0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
485ELC_10

485ELC_10

  • 厂商:

    PROTEC(普罗太克)

  • 封装:

  • 描述:

    485ELC_10 - HIGH SPEED ETHERNET DATA LINE PROTECTOR - Protek Devices

  • 详情介绍
  • 数据手册
  • 价格&库存
485ELC_10 数据手册
05039 Only One Name Means ProTek’Tion™ 485ELC HIGH SPEED ETHERNET DATA LINE PROTECTOR DESCRIPTION The 485ELC is low capacitance, two-stage transient voltage protector the provides primary and secondary protection against lightning, inductive switching and electrostatic discharge (ESD) transient threats. The first stage diverts the transient current through the ground terminal return path and the second stage clamps the voltage to a safe level without interruption of service. The 485ELC is designed to protect data lines, transmission lines, timing and control interface circuits from commonmode (line-to-ground) or differential (line-line) transients. Terminals 1 & 2 and 3 & 4 are designed as line pairs. A transient voltage suppressor is connected across each line pair for differential mode protection. 485ELC Capacitance over the operating voltage range is important. If capacitance is non-linear, distortion, loss of data or access to the I/O port can occur (See Figure 1). APPLICATIONS • • • • • Ethernet & Catagory 5 Systems RS-485 Serial Communication Lines ISDN Equipment/Systems Video Transmission Systems Smoke Detector & Fire Alarm Systems C - TvS Capactiance - pF 1,000 FIGuRE 1 TyPICAL LOw CAPACITANCE CuRvE FEATuRES • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 95A, 8/20µs, Level 4 (LineGnd) & 48A, Level 4 (Line-Line) • Low Capacitance - 25pF • Designed for EIA Standard RS-485 Data Lines • Permanent Two-Stage 2 Line Pair Protector • Subnanosecond Response Time • Common & Differential Mode Protection • Automatic Reset - Does Not Interrupt Service • Effective Against Lightning, Inductive Switching and ESD Industry Standard Low Capacitance TVS Protector 100 ProTek Device 10 0 MECHANICAL CHARACTERISTICS • Approximate Weight: 142 grams • Flammability Rating UL 94V-0 1 2 3 4 v(OP) - Circuit Operating - volts 5 05039.R4 12/10 Page 1 www.protekdevices.com 05039 Only One Name Means ProTek’Tion™ 485ELC TyPICAL DEvICE CHARACTERISTICS MAXIMuM RATINGS @ 25°C unless Otherwise Specified PARAMETER Peak Operating Line Voltage Operating Line Current Transient Voltage Transient Current - 8/20µs waveform Transient Current - 8/20µs waveform Operating Temperature Storage Temperature Response Time SyMBOL VOP IO TA TSTG - vALuE ±7 250 20 10 40 -55 to 100 -55 to 100
485ELC_10
### 物料型号 - 型号:485ELC

### 器件简介 - 描述:485ELC是一款低电容、两级瞬态电压保护器,用于保护高速以太网数据线免受雷电、感性开关和静电放电(ESD)瞬态威胁。第一阶段通过地线终端返回路径分流瞬态电流,第二阶段将电压钳制在安全水平,不会中断服务。

### 引脚分配 - 引脚:485ELC共有5个引脚,包括4个数据线引脚和2个地线引脚。两个地线引脚在内部是连接的,使用单个地线连接即可,但推荐使用两个地线连接以降低对地阻抗。

### 参数特性 - 最大工作线电压:±7伏特 - 工作线电流:250毫安 - 瞬态电压:20千伏/线 - 瞬态电流(8/20us波形):10千安/线和40千安/线 - 工作温度:-55至100摄氏度 - 存储温度:-55至100摄氏度 - 响应时间:小于1纳秒

### 功能详解 - 应用:适用于以太网和5类系统、RS-485串行通信线、ISDN设备/系统、视频传输系统、烟雾探测器和火警系统。 - 特性:兼容IEC 61000-4-2(ESD)、IEC 61000-4-4(EFT)和IEC 61000-4-5(浪涌)标准,具有低电容(25皮法),专为EIA标准RS-485数据线设计,具有亚纳秒响应时间,提供共模和差模保护,自动复位,不会中断服务,有效防护雷电、感性开关和ESD。

### 应用信息 - 应用场景:主要用于保护数据线、传输线、时序和控制接口电路免受共模(线对地)或差模(线对线)瞬态的影响。

### 封装信息 - 安装指南:产品应尽可能靠近被保护的设备安装。低阻抗接地系统对于保持线对地连接的低钳制电压很重要。 - 尺寸:PDF文档中提供了详细的封装尺寸信息,包括最小和最大尺寸(毫米和英寸)。
485ELC_10 价格&库存

很抱歉,暂时无法提供与“485ELC_10”相匹配的价格&库存,您可以联系我们找货

免费人工找货