90KS200C

05026 60KS200C thru 90KS200C SHIPBOARD/ AC POWER BUS VOLTAGE SUPPRESSOR APPLICATIONS ✔ AC Power Protection ✔ Shipboard (Line-Line) Protection ✔ Differential AC Power Bus ✔ Aircraft AC Power Bus IEC COMPATIBILITY ( EN61000-4) ✔ Meets the Following Military Specifications: - DOD-STD-1399 - MIL-STD-704A ✔ 60 & 90 kilowatts Peak Pulse Power per Line (tp=1.2/50µs) ✔ Each Device 100% Tested ✔ 200 Volts Bidirectional 60KS200C MECHANICAL CHARACTERISTICS ✔ Hermetically Sealed Glass to Metal Sub-Assemblies ✔ Weight 50 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Logo & Part Number ✔ Screening Available Upon Request - The 60 & 90KS series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable test). Standard screening is available based on the following options: H1 - Submodule Screening per test plans 05231 & 05232 H2 - Submodule & Module Screening per test plan 05233 H3 - Submodule & Module Screening, Module Group B & C Lot Testing per test plans 05234 & 05235 90KS200C MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 1.2/50µs) - See Fig. 1 Operating Temperature Storage Temperature Steady State Power Disspiation @ 50°C SYMBOL PPP TL TSTG TA VALUE 60 & 90 -55 to 150 -55 to 150 10.0 UNITS kilowatts °C °C Amps 05026.R6 2/07 1 www.protekdevices.com 60KS200C thru 90KS200C DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM LEAKAGE CURRENT MAXIMUM PEAK PULSE CURRENT (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IPP VC VOLTS 335 280 @1mA VWM VOLTS 60KS200C 90KS200C 180 180 V(BR) VOLTS 200 200 @V WM ID µA 10 0.5 IPPM AMPS 180 180 1000 FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - killowatts 90kW 1.2/50µs Waveform 100 60kW 1.2/50µs Waveform 10 1 0.1 1 10 100 td - Pulse Duration - µs 1000 10000 FIGURE 2 PULSE WAVE FORM 100 IPP - Peak Pulse Current - % of IPP 100 FIGURE 3 POWER DERATING CURVE Peak Pulse Power 1.2/50µs 80 % Of Rated Power tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 1.2µs td = 50µs 60 td = t IPP/2 50 40 20 e-t 0 0 50 100 t - Time - ms 150 0 0 25 Average Power 50 75 100 125 TL - Lead Temperature - °C 150 05026.R6 2/07 2 www.protekdevices.com 60KS200C thru 90KS200C PACKAGE OUTLINE & DIMENSIONS 60KS200C PACKAGE OUTLINE 60KS200C A C B D G H DIMENSIONS DIM A B C D* E F* G H I* J MILLIMETERS MIN MAX 56.38 49.02 3.43 20.32 8.26 3.18 DIA 16.76 34.16 6.35 11.94 57.91 50.03 4.17 20.32 9.27 3.18 DIA 18.29 35.69 6.35 13.46 90KS200C INCHES MIN MAX 2.28 2.22 1.93 1.97 0.165 0.135 0.800 0.800 0.325 0.365 0.125 DIA 0.125 DIA 0.660 0.720 1.405 1.345 0.250 0.250 0.470 0.530 E F J I 90KS200C PACKAGE OUTLINE A C B D G H DIMENSIONS DIM A B C D E F G H I J MILLIMETERS MIN MAX 47.75 6.10 24.89 4.90 DIA 22.66 45.34 6.48 63.50 48.77 6.60 25.91 10.16 5.21 DIA 23.06 46.10 7.49 13.97 INCHES MIN MAX 2.50 1.880 1.920 0.240 0.260 0.980 1.020 0.400 0.193 DIA 0.205 DIA 0.892 0.908 1.785 1.815 0.255 0.295 0.550 E F J I Outline & Dimensions: Rev 0 - 4/02, 06033 Note*: Dimensions are nominal. COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05026.R6 2/07 3