ESDA05C

05188 ESDA05C-5 LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ ✔ ✔ ✔ ✔ Set-Top Boxes Modems Computers Printers Communication Systems IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns SOT-23-6 FEATURES ✔ 80 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ ESD Protection > 25 kilovolts ✔ Protect Five(5) Lines of Protection ✔ Low Clamping Voltage ✔ Bidirectional Configuration ✔ Low Leakage Current < 1.0µA ✔ Low Capacitance: 15pF per Diode ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SOT-23-6 Package Weight 16 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By DOT on Package PIN CONFIGURATION 1 2 3 6 5 4 05188.R2 2/07 1 www.protekdevices.com ESDA05C-5 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TL TSTG VALUE 80 -55 to 150 -55 to 150 UNITS Watts °C °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) DEVICE MARKING RATED STAND-OFF VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE MINIMUM BREAKDOWN VOLTAGE V WM VOLTS @ 1mA V(BR) VOLTS @VWM ID µA 0V @ 1 MHz C pF ESDA05C-5 ED5 5.0 6.1 1 15 Note 1: Bidirectional Only: Test between pins 2 to 1, 2 to 6, 2 to 5, 2 to 4 and 2 to 3 Electrical characteristics apply in both directions. Note 2: Bidirectional Only: Capacitance measured between pins 1, 3, 4, 5, and 6 to 2. 05188.R2 2/07 2 www.protekdevices.com ESDA05C-5 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME 1,000 PPP - Peak Pulse Current - Watts 100 80W, 8/20µs Waveform 10 1 0.01 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % Of IPP FIGURE 2 PULSE WAVE FORM tf Peak Value IPP e-t TEST WAVEFORM PARAMETERS tf = 8µs t = 20µs d 100 80 60 40 20 0 td = t IPP/2 0 5 10 15 20 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs 80 % Of Rated Power 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 05188.R2 2/07 3 www.protekdevices.com ESDA05C-5 SOT-23-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE D E SOT-23-6 6 5 4 K 0° - 8° PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 2.80 1.50 0.90 0.35 0.85 1.70 0.90 0.09 2.60 0.20 TYP 0.35 3.05 1.75 1.30 0.50 1.05 2.10 1.45 0.20 3.00 0.20 TYP 0.55 3 2 1 L J B M INCHES MIN MAX 0.110 0.059 0.036 0.014 0.033 0.067 0.036 0.003 0.102 0.007 TYP 0.014 0.120 0.070 0.051 0.020 0.040 0.083 0.057 0.008 0.118 0.007 TYP 0.022 F A G C A B C D E F G J K L M NOTES MOUNTING PAD TYPICAL DIM Millimeters Inches 1 2 3 4 5 0.70 1.90 0.95 2.40 1.00 0.028 0.074 0.037 0.094 0.039 4 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. 3 2 1 5 TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., ESDA05C-5-T7 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., ESDA05C-5-LF-T7. Outline & Dimensions: Rev 2 - 10/05, 06013 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7”) Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05188.R2 2/07 4