ESOT12LCC-1_11

05292 Only One Name Means ProTek’Tion™ ESOT12LCC-1 LOW CAPACITANCE TVS ARRAY DESCRIPTION The ESOT12LCC-1, is a high frequency, transient suppression protector of wireless telecommunications applications for portable devices. This device is packaged in a SOT-23-6 plastic case and is available in a 12 volt, bidirectional configuration. Due to its low capacitance, the ESOT12LCC-1 is ideal protection of Ethernet or USB port interfaces against the effects of electrostatic discharge (ESD) and electrical fast transients (EFT). This device meets the requirements of IEC 610004-2 and IEC 61000-4-4. SOT-23-6 PACkAGE FEATuRES • • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns 250 Watts Peak Pulse Power per Line(tp = 8/20µs) Protects Two Bidirectional Lines Bidirectional Configuration Low Leakage Current < 1.0µA Low Capacitance < 3pF per Line RoHS Compliant REACH Compliant APPLICATIONS • • • • • • Ethernet - 10/100/1000 Base T CAN Bus SMART Phones Audio/Video Inputs Portable Electronics E1/T1 & E3/T3 mEChANICAL ChARACTERISTICS • • • • Molded JEDEC SOT-23-6 Package Approximate Weight: 16 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 PIN CONFIGuRATION I/O 1 NC 2 NC 3 6 NC 5 NC 4 I/O 05292.R1 2/11 Page 1 www.protekdevices.com 05292 Only One Name Means ProTek’Tion™ ESOT12LCC-1 TYPICAL DEVICE ChARACTERISTICS mAXImum RATINGS @ 25°C unless Otherwise Specified PARAmETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYmBOL PPP TL TSTG VALuE 250 -55 to 150 -55 to 150 uNITS Watts °C °C ELECTRICAL ChARACTERISTICS PER LINE @ 25°C unless Otherwise Specified PART NumBER (Note 1) DEVICE mARkING RATED STAND-OFF VOLTAGE VWm VOLTS ESOT12LCC-1 NOTES 12L 12.0 mINImum BREAkDOWN VOLTAGE @ 1mA V(BR) VOLTS 13.3 mAXImum CLAmPING VOLTAGE (Fig. 2) @ I P = 1A VC VOLTS 19.0 mAXImum LEAkAGE CuRRENT @V Wm ID µA 1 TYPICAL CAPACITANCE @0V, 1mhz C pF 3 1. Test between pins 1 to 4 in both directions. 05292.R1 2/11 Page 2 www.protekdevices.com 05292 Only One Name Means ProTek’Tion™ ESOT12LCC-1 TYPICAL DEVICE ChARACTERISTICS FIGuRE 1 PEAk PuLSE POWER VS PuLSE TImE 10,000 PPP - Peak Pulse Power - Watts 1,000 250W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGuRE 2 PuLSE WAVE FORm tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 05292.R1 2/11 Page 3 www.protekdevices.com 05292 Only One Name Means ProTek’Tion™ ESOT12LCC-1 SOT-23-6 PACkAGE INFORmATION OuTLINE DImENSIONS DIm A B C D E G J K L M NOTES D E mILLImETERS mIN 2.80 1.50 0.90 0.30 0.85 0.90 0.09 2.60 0.0 0.30 INChES mIN 0.110 0.059 0.036 0.012 0.033 0.036 0.003 0.102 0.0 0.012 mAX 3.05 1.75 1.30 0.40 1.05 1.45 0.20 3.00 0.15 0.60 mAX 0.120 0.070 0.051 0.016 0.040 0.057 0.008 0.118 0.006 0.024 G A 1 2 3 L B M J 6 5 4 K 0° - 8° 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. C PAD LAYOuT DImENSIONS DIm A B C D E NOTES B C E D mILLImETERS NOmINAL 0.70 1.90 0.95 2.40 1.00 INChES NOmINAL 0.028 0.074 0.037 0.094 0.039 A 1. Controlling dimension: inches. 05292.R1 2/11 Page 4 www.protekdevices.com 05292 Only One Name Means ProTek’Tion™ ESOT12LCC-1 TAPE AND REEL P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 K0 Pin 1 F W B0 P User Direction of Feed SPECIFICATIONS REEL DIA. 178mm (7”) 1. 2. 3. 4. TAPE WIDTh 8mm A0 B0 k0 D E F W P0 P2 P tmax 0.25 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 NOTES Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06013.R5 2/11 ORDERING INFORmATION BASE PART NumBER ESOT12LCC-1 LEADFREE SuFFIX -LF TAPE SuFFIX -T7 QTY/REEL 3,000 REEL SIZE 7” TuBE QTY n/a 05292.R1 2/11 Page 5 www.protekdevices.com 05292 Only One Name Means ProTek’Tion™ ESOT12LCC-1 COmPANY INFORmATION COmPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT uS Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2008 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05292.R1 2/11 Page 6 www.protekdevices.com