ESOT3.3LC-2_07

05183 ESOT3.3LC-2 LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ USB Ports ✔ Cellular Phones ✔ Audio/Video Inputs ✔ Personal Digital Assistant (PDA) ✔ E1/T1 & E3/T3 IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns F E AT U R E S ✔ ✔ ✔ ✔ ✔ ✔ ✔ ESD Protection > 25 kilovolts 175 Watts Peak Pulse Power per Line (tp=8/20µs) Protects Two (2) Bidirectional Lines Unidirectional Configuration Low Leakage Current < 2.0µA Low Capacitance: 15pF per Line RoHS Compliant CHARACTERISTICS SOT-23 MECHANICAL ✔ Molded JEDEC SOT-23 Package ✔ Weight 8 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code PIN CONFIGURATION 1 3 2 05183.R2 2/07 1 www.protekdevices.com ESOT3.3LC-2 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Pulse Current (tp = 8/20µs) Operating Temperature Storage Temperature SYMBOL PPP IPP TA TSTG VALUE 175 5 -55 to 150 -55 to 150 UNITS Watts A °C °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE MINIMUM SNAP BACK VOLTAGE V WM VOLTS @ 1mA V(BR) VOLTS @ ISB = 50mA VSB VOLTS @VWM ID µA @0V, 1 MHz C pF ESOT3.3LC-2 E3 3.3 3.5 3.3 6.5 2 15 Note 1: Test between pins 2 to 3 and 1 to 3. 10,000 PPP - Peak Pulse Power - Watts FIGURE 1 PEAK PULSE POWER VS PULSE TIME IPP - Peak Pulse Current - % of IPP 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 1,000 175W 8/20µs Waveform 100 e-t td = t I /2 PP 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 0 5 10 15 20 t - Time - µs 25 30 05183.R2 2/07 2 www.protekdevices.com ESOT3.3LC-2 SOT-23 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-23 A L 0º - 10º 3 B 1 2 S K J PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.45 0.89 2.10 0.45 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.60 1.02 2.50 0.60 INCHES MIN MAX 0.1102 0.0472 0.0350 0.0150 0.0701 0.0005 0.0034 0.0180 0.0350 0.0830 0.0177 0.1197 0.0551 0.0440 0.0200 0.0807 0.0040 0.0070 0.0236 0.0401 0.0984 0.0236 V G C D H A B C D G H J K L S V NOTES 1. 2. 3. 4. MOUNTING PAD 0.037” (0.95mm) Dimensioning and tolerances per ANSI Y14.5M, 1985. Controlling Dimension: Inches Pin 3 is the cathode (Unidirectional Only). Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., ESOT3.3LC-2-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., ESOT3.3LC-2-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., ESOT3.3LC-2-LF-T7. Outline & Dimensions: Rev 1 - 11/01, 06012 0.079” (2.00mm) 0.033” (0.85mm) 0.033” (0.85mm) COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05183.R2 2/07 3