ET724

05125 ET724 STEERING DIODE ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Set Top Box Interface ✔ Sensor Interface ✔ Handheld Electronics ✔ FireWire ✔ USB Interface IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) SOT-23-6 FEATURES ✔ ✔ ✔ ✔ ✔ ✔ ESD Protection > 40 kilovolts Low Clamping Voltage Provides Four(4) Lines of Protection Low Leakage Current < 100nA Low Capacitance: 3pF Typical RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SOT-23-6 Package Weight 16 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By DOT on Package PIN CONFIGURATION I/O 1 1 2 3 6 5 4 I/O 4 VN VP I/O 2 I/O 3 05125.R8 2/07 1 www.protekdevices.com ET724 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature Continuous Power Dissipation SYMBOL TA TSTG PPC VALUE -55 to 150 -55 to 150 125 UNITS °C °C mW ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) VRRM VOLTS ET724 724 20 TYPICAL FORWARD VOLTAGE 8/20µs @1A VF VOLTS 2 @ 25°C Unless Otherwise Specified MAXIMUM REVERSE LEAKAGE CURRENT (See Note 2) @VRRM IR nA 10 MAXIMUM QUIESCENT SUPPLY CURRENT (See Note 3) @20V IRQ nA 100 TYPICAL CAPACITANCE MAXIMUM PEAK PULSE FORWARD CURRENT 8/20µs IFM AMPS 12 @0V, 1MHz Cj pF 3 Note 1: VRRM is +VCC for pin 5, -VEE for pin 2. Pin 2 also represents ground for unidirectional applications. Note 2: +20V from pin 5 to 1, 5 to 4, 5 to 3, and 5 to 6. -20V from pin 2 to 1, 2 to 3, 2 to 4, and 2 to 6. Note 3: +20V from pin 5 to 2. FIGURE 1 NON-REPETITIVE PEAK PULSE CURRENT CAPABILITY 8 IPP - Peak Pulse Current - % of IPP Peak Pulse Current - Amps 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 6 e-t 4 2 td = t I /2 PP 0 0.001 0.01 0.1 1 Square Wave Pulse - ms 10 100 0 5 10 15 t - Time - µs 20 25 30 05125.R8 2/07 2 www.protekdevices.com ET724 GRAPHS 200 FIGURE 3 TYPICAL LOW CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 Forward Current - mA 160 120 80 40 0 600 800 1,000 Forward Voltage Drop - mV 1,200 5 FIGURE 4 TYPICAL HIGH CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 4 Forward Current - A 3 2 1 0 0 1 2 Forward Voltage Drop - V 3 05125.R8 2/07 3 www.protekdevices.com ET724 SOT-23-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE D E SOT-23-6 6 5 4 K 0° - 8° PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 2.80 1.50 0.90 0.35 0.85 1.70 0.90 0.09 2.60 0.20 TYP 0.35 3.05 1.75 1.30 0.50 1.05 2.10 1.45 0.20 3.00 0.20 TYP 0.55 3 2 1 L J B M INCHES MIN MAX 0.110 0.059 0.036 0.014 0.033 0.067 0.036 0.003 0.102 0.007 TYP 0.014 0.120 0.070 0.051 0.020 0.040 0.083 0.057 0.008 0.118 0.007 TYP 0.022 F A G C A B C D E F G J K L M NOTES MOUNTING PAD TYPICAL DIM Millimeters Inches 1 2 3 4 5 0.70 1.90 0.95 2.40 1.00 0.028 0.074 0.037 0.094 0.039 4 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. 3 2 1 5 TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., ET724-T7 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., ET724-LF-T7. Outline & Dimensions: Rev 2 - 10/05, 06013 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7”) Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05125.R8 2/07 4