GPZ532_08

05291 GPZ532 HIGH ENERGY - EXTENDED PULSE TVS APPLICATIONS ✔ Remote DC Power Supply, Base Station & Microwave Protection ✔ Electric Drive Motors & Controls ✔ Mobile Electronics Operating in Harsh Environments IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-5 (Surge): 95A, 8/20µs Level 3 (Line-Ground) & Level 4 (Line-Line) FEATURES ✔ 10 kilowatts Peak Pulse Power per Line (tp=1ms) ✔ Each Device 100% Tested ✔ High Average (DC) Power Dissipation ✔ Superior Heat Dissipation Capability ✔ Small Package Size GPZ532 MECHANICAL CHARACTERISTICS ✔ Hermetically Sealed Sub-Assemblies ✔ Weight 38 grams Approximate) ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Logo, Date Code & Part Number MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 1ms) Operating Temperature Storage Temperature Steady State Power Disspiation @ 25°C (derate 2.33W/°C) SYMBOL PPP TL TSTG TA VALUE 10 -55 to 150 -55 to 150 350 UNITS kilowatts °C °C Watts 05291.R0 7/08 1 www.protekdevices.com GPZ532 DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IPPM VC VOLTS 40 MAXIMUM LEAKAGE CURRENT MAXIMUM PEAK PULSE CURRENT (See Fig. 2) VWM VOLTS GPZ532 28 V(BR) VOLTS 32 @ IT AMPS 0.2 @VWM ID µA 50 IPPM AMPS 100 Note 1: Maximum VF = 3.5V @ 100A, 8.3ms (sine wave). FIGURE 1 PEAK PULSE POWER VS PULSE TIME 100 PPP - Peak Pulse Power - killowatts 10 2kW @ 50ms Waveform 1 0.1 0.1 1 10 100 1000 td - Pulse Duration - ms 10000 100000 FIGURE 2 PULSE WAVE FORM IPP - Peak Pulse Current - % Of IPP 100 FIGURE 3 POWER DERATING CURVE Peak Pulse Power 1ms 100 % Of Rated Power TEST WAVEFORM PARAMETERS td = 1ms 80 60 50 40 20 0 Average Power 0 1 t - Time - ms 2 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 05291.R0 7/08 2 www.protekdevices.com GPZ532 PACKAGE OUTLINE & DIMENSIONS GPZ532 PACKAGE OUTLINE GPZ532 A C B F (4 Places) G Cathode Terminal (Positive) E D DIMENSIONS DIM H MILLIMETERS 38.10 TYP 30.48 TYP 3.81 TYP 30.48 TYP 38.10 TYP 3.56 DIA 3.56 DIA 3.81 50.80 17.02 MAX 1.57 20.60 3.18 INCHES 1.50 TYP 1.20 TYP 0.15 TYP 1.20 TYP 1.50 TYP 0.14 DIA 0.14 DIA 0.15 2.00 0.67 MAX 0.062 0.812 0.125 I K M J Case Anode (Negative) N Outline & Dimensions: Rev 0 - 4/02, 06034 A B C D E F G H I J K M N COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05291.R0 7/08 3