LCD15C

05018 Only One Name Means ProTek’Tion™ LCD05C - LCD24C HigH PoweReD muLti-Line tvs aRRay DesCRiPtion The LCD Series are high powered multi-line TVS arrays available in a 16 pin DIP package. This series is designed to protect high-speed applications from the damaging effects of ESD, EFT and secondary transient threats. The LCD Series has a peak pulse power rating of 800 Watts for an 8/20µs waveshape. This devices meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. 16 Pin DiP PaCkage FeatuRes • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • 800 Watts Peak Pulse Power per Line (tp = 8/20µs) • Bidirectional Configuration • ESD Protection > 25 kilovolts • Available in Multiple Voltages • Protects up to 8 Lines • Low Capacitance: 15pF • RoHS Compliant • REACH Compliant aPPLiCations • • • • • Ethernet 10/100 Base T RS-485 xDSL & ATM SCSI & USB Interfaces Audio/Video I/O Ports meCHaniCaL CHaRaCteRistiCs • • • • Molded 16 Pin Dual-In-Line (DIP) Package Approximate Weight: 1.2 grams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 Pin ConFiguRation 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 05018.R8 11/10 Page 1 www.protekdevices.com 05018 Only One Name Means ProTek’Tion™ LCD05C - LCD24C tyPiCaL DeviCe CHaRaCteRistiCs maXimum Ratings @ 25°C unless otherwise specified PaRameteR Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature symBoL PPP TL TSTG vaLue 800 -55 to 150 -55 to 150 units Watts °C °C eLeCtRiCaL CHaRaCteRistiCs PeR Line @ 25°C unless otherwise specified PaRt numBeR (note 1) RateD stanD-oFF voLtage minimum BReakDown voLtage @1ma v(BR) voLts 6.0 8.5 13.3 16.7 26.7 maXimum CLamPing voLtage (Fig. 2) @ iP = 1a vC voLts 9.8 12.3 19.0 25.5 40.0 maXimum CLamPing voLtage (Fig. 2) @ 8/20µs vC @ i PP 24.0V @ 45.0A 25.5V @ 40.0A 32.0V @ 34.0A 38.0V @ 27.0A 48.0V @ 22.0A maXimum Leakage CuRRent @v wm iD µa 100 10 4 4 4 maXimum CaPaCitanCe temPeRatuRe CoeFFiCient oF v(BR) vwm voLts LCD05C LCD08C LCD12C LCD15C LCD24C notes 5.0 8.0 12.0 15.0 24.0 @0v, 1mHz C pF 15 15 15 15 15 q v(BR) mv/°C 3 9 16 17 26 1. Tested on pin pairs 1 and 16, 2 and 15, 3 and 14, 4 and 13, 5 and 12, 6 and 11, 7 and 10, 8 and 9. 05018.R8 11/10 Page 2 www.protekdevices.com 05018 Only One Name Means ProTek’Tion™ LCD05C - LCD24C tyPiCaL DeviCe CHaRaCteRistiCs FiguRe 1 Peak PuLse PoweR vs PuLse time 100 PPP - Peak Pulse Current - kilowatts 10 800W, 8/20µs Waveform 1 0.1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 iPP - Peak Pulse Current - % of iPP FiguRe 2 PuLse wave FoRm tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % of Rated Power FiguRe 3 PoweR DeRating CuRve Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - time - µs 20 25 30 0 25 50 75 100 125 ta - ambient temperature - °C 150 05018.R8 11/10 Page 3 www.protekdevices.com 05018 Only One Name Means ProTek’Tion™ LCD05C - LCD24C tyPiCaL DeviCe CHaRaCteRistiCs FiguRe 4 oveRsHoot & CLamPing voLtage FoR LCD05C 24 15 5 volts per Division 5 -5 -15 esD test Pulse - 12 kilovolt, 1/30ns (waveshape) 16 FiguRe 4 tyPCiaL CLamPing voLtage vs Peak PuLse CuRRent FoR LCD05C vC - Clamping voltage - volts 12 8 4 0 0 2 4 6 8 10 12 iPP - Peak Pulse Current - amps 14 16 18 05018.R8 11/10 Page 4 www.protekdevices.com 05018 Only One Name Means ProTek’Tion™ LCD05C - LCD24C sPiCe moDeL FiguRe 1 sPiCe moDeL I/O ABD LCRD LCRD Lg 0.8nH ABD ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance taBLe 1 - sPiCe PaRameteRs PaRameteR BV IBV Cjo IS Vj M N RS TT EG unit V µA pF A V Ohms s eV aBD(tvs) See Table 2 1 See Table 2 See Table 2 0.6 0.33 1 See Table 2 1E-8 1.11 LCRD 200 0.01 5 1E-13 0.6 0.33 1 0.31 1E-9 1.11 PaRt numBeR LCD05C LCD08C LCD12C LCD15C LCD24C taBLe 2 - aBD sPeCiFiC sPiCe PaRameteRs i s (amPs) Bv(voLts) Cjo(pF) 6.0 8.5 13.3 16.7 26.7 880 481 319 238 210 1E-11 1E-13 1E-13 1E-13 1E-13 Rs(oHms) 0.09 0.18 0.22 0.31 0.93 05018.R8 11/10 Page 5 www.protekdevices.com 05018 Only One Name Means ProTek’Tion™ LCD05C - LCD24C aPPLiCation inFoRmation Port 1 D+ DUSB Output Connector 16 15 14 USB Output Connector 13 Port 2 D+ D- 1 Port 3 D+ DUSB Output Connector 12 2 USB IC 3 4 USB Output Connector Port 4 D+ D- 11 10 9 5 6 7 8 Circuit connectivity is as follows: • Pins 1, 2, 3, 4, 5, 6, 7 and 8 connected to ground. • Pins 16 and 15 connected to Port 1, D- and D+. • Pins 14 and 13 connected to Port 2, D- and D+. • Pins 12 and 11 connected to Port 3, D- and D+. • Pins 10 and 9 connected to Port 4, D- and D+. FiguRe 1 - Common-moDe usB PRoteCtion CiRCuit BoaRD ReCommenDations Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05018.R8 11/10 Page 6 www.protekdevices.com 05018 Only One Name Means ProTek’Tion™ LCD05C - LCD24C 16 Pin DiP PaCkage inFoRmation outLine Dimensions Dim A B C D E F G H I J K L notes A miLLimeteRs min 18.80 6.35 7.50 0.21 0° 0.51 3.69 2.80 1.02 1.27 0.39 2.54 inCHes min 0.740 0.250 0.295 0.008 0° 0.020 0.145 0.110 0.040 0.050 0.015 0.100 maX 19.55 6.85 7.74 0.38 10° 1.01 4.44 3.30 1.77 1.27 0.53 2.54 maX 0.770 0.270 0.305 0.015 10° 0.040 0.175 0.130 0.070 0.050 0.021 0.100 D 16 Places E G H L J 12 Places K 16 Places B C I 12 Places F Orientation Dot (Pin #1) 1. Dimensions are exclusive of mold flash and metal burrs. 2. Dimensions “J” and “L” are between centers. oRDeRing inFoRmation Base PaRt numBeR (xx = voltage) LCDxxC notes LeaDFRee suFFiX -LF taPe suFFiX n/a Qty/ReeL n/a ReeL siZe n/a tuBe Qty 25 1. Marking on Part - logo, part number, date code and pin one defined by dot on top of package. Package outline per document number 06003.R2 9/09. 05018.R8 11/10 Page 7 www.protekdevices.com 05018 Only One Name Means ProTek’Tion™ LCD05C - LCD24C ComPany inFoRmation ComPany PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContaCt us Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05018.R8 11/10 Page 8 www.protekdevices.com