LP05C

05122 LP05C STANDARD CAPACITANCE TVS ARRAY APPLICATIONS ✔ USB Port Protection ✔ Cellular Phones ✔ Control & Monitoring Systems ✔ Portable Electronics ✔ Wireless Bus Protection IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns F E AT U R E S ✔ ESD Protection > 40 kilovolts ✔ Low Clamping Voltage ✔ RoHS Compliant MECHANICAL CHARACTERISTICS SOT-23 ✔ Molded JEDEC SOT-23 Package ✔ Weight 8 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code PIN CONFIGURATION 1 3 2 05122.R2 2/07 1 www.protekdevices.com LP05C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature SYMBOL TA TSTG VALUE -55 to 150 -55 to 150 UNITS °C °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE (See Note 1) @ 10mA (Positive) V(BR) VOLTS 5.6 MINIMUM BREAKDOWN VOLTAGE (See Note 2) @ 10mA (Negative) V(BR) VOLTS -1.2 @ 25°C Unless Otherwise Specified TYPICAL CLAMPING VOLTAGE (See Note 2) ESD = 8kV (Negative) VC VOLTS -8 MAXIMUM LEAKAGE CURRENT (See Note 1) @VWM ID µA 10 TYPICAL CAPACITANCE V WM VOLTS LP05C LP5 5.5 TYPICAL CLAMPING VOLTAGE (See Note 1) ESD = 8kV (Positive) VC VOLTS 12 2.5V @ 1 MHz Cj pF 30 Note 1: Pins 3 to 1 and 3 to 2. Note 2: Pins 1 to 3 and 2 to 3. 05122.R2 2/07 2 www.protekdevices.com LP05C SOT-23 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-23 A L 0º - 10º 3 B 1 2 S K J PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.45 0.89 2.10 0.45 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.60 1.02 2.50 0.60 INCHES MIN MAX 0.1102 0.0472 0.0350 0.0150 0.0701 0.0005 0.0034 0.0180 0.0350 0.0830 0.0177 0.1197 0.0551 0.0440 0.0200 0.0807 0.0040 0.0070 0.0236 0.0401 0.0984 0.0236 V G C D H A B C D G H J K L S V NOTES 1. 2. 3. 4. MOUNTING PAD 0.037” (0.95mm) Dimensioning and tolerances per ANSI Y14.5M, 1985. Controlling Dimension: Inches Pin 3 is the cathode (Unidirectional Only). Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., LP05C-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., LP05C-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., LP05C-LF-T7. Outline & Dimensions: Rev 1 - 11/01, 06012 0.079” (2.00mm) 0.033” (0.85mm) 0.033” (0.85mm) COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05122.R2 2/07 3