MMAD1107

05136 Only One Name Means ProTek’Tion™ MMAD Series ultRA low cAPAcitAnce Multi-line SteeRing DioDe ARRAy DeScRiPtion The MMAD Series are low distortion steering diodes. These devices are intended for use in high frequency analog or digital data I/O ports for protection against Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). The MMAD Series is connected between rail-to-rail voltage bus or rail-to-ground for clamping and diverting overvoltage transients for the protection of sensitive network interface circuits. This series provides low capacitance, which insures signal integrity up to 900MHz, while complete isolation between adjacent diodes keeps cross-talk to a minimum. The MMAD Series is available in a SO-14 package and meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. So-14 PAckAge FeAtuReS • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(LineGnd) & Level 2(Line-Line) • 500 Milliwatt Continuous Power Dissipation • Monolithic Design • ESD Protection > 25 kilovolts • Protects up to 7 to 10 I/O Lines • Working Voltage > 50 Volts • Low Leakage Current < 0.1µA • Ultra Low Capacitance: 5pF per Diode • RoHS Compliant • REACH Compliant APPlicAtionS • • • • High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet 10/100 Base T Computer I/O Ports MechAnicAl chARActeRiSticS • • • • Molded JEDEC SO-14 Package Approximate Weight: 0.15 grams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 16mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 ciRcuit DiAgRAM + I/O PORT GND OR (-) Does not Apply to the MMAD1109 05136.R11 2/11 Page 1 www.protekdevices.com 05136 Only One Name Means ProTek’Tion™ MMAD Series Pin iDentiFicAtion AnD conFiguRAtion MMAD1106 14 1 MMAD1103 2 2 3 5 7 8 9 11 12 14 3 5 7 8 9 11 12 8 Diode Common Anode Array NC Pins 1, 4, 6, 10 & 13 8 Lines of Protection 16 Diode Array NC Pins 4, 6, 10 & 13 8 Lines of Protection 1 MMAD1107 8 3 MMAD130 11 2 3 11 12 4 5 9 10 1 4 5 6 7 8 9 10 13 14 14 Dual 8 Diode Array NC Pins 6 & 13 8 Lines of Protection 7 2 Dual 10 Diode Array 10 Lines of Protection 12 MMAD1105 14 MMAD1109 7 6 5 4 3 2 1 2 3 5 7 8 9 11 12 8 9 10 11 12 13 14 8 Diode Common Cathode Array NC Pins 1, 4, 6, 10 & 13 8 Lines of Protection 7 Lines of Protection 05136.R11 2/11 Page 2 www.protekdevices.com 05136 Only One Name Means ProTek’Tion™ MMAD Series tyPicAl Device chARActeRiSticS MAXiMuM RAtingS @ 25°c unless otherwise Specified PARAMeteR Continuous Power Dissipation Continuous Forward Current (Single Diode) Repetitive Peak Forward Current @ tp = 5µs, F = 50kHz Operating Temperature Storage Temperature SyMBol PPK IP IFRM TA TSTG vAlue 500 400 700 -55 to 150 -55 to 150 unitS Milliwatts mA mA °C °C electRicAl chARActeRiSticS PeR line @ 25°c unless otherwise Specified PARt nuMBeR RePetitive PeAk ReveRSe voltAge @ 10µA v RRM voltS MMAD1103 MMAD1105 MMAD1106 MMAD1107 MMAD1109 MMAD130 50 50 50 50 50 50 MAXiMuM FoRwARD PeAk PulSe cuRRent @ 8/20µs i FM AMPS 12 12 12 12 12 12 MAXiMuM FoRwARD voltAge @ 100mA vF voltS 1.2 1.2 1.2 1.2 1.2 1.2 MAXiMuM ReveRSe leAkAge cuRRent vRRM @ 40v iR µA 0.1 0.1 0.1 0.1 0.1 0.1 MAXiMuM cAPAcitAnce (Per Diode) @4v, 1Mhz cj pF 5 5 5 5 5 5 120 iPP - Peak Pulse current - % of iPP FiguRe 1 PulSe wAve FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t/(IPP/2) 10 15 t - time - µs 20 25 30 05136.R11 2/11 Page 3 www.protekdevices.com 05136 Only One Name Means ProTek’Tion™ MMAD Series So-14 PAckAge inFoRMAtion outline DiMenSionS DiM A B C D F G J K P R 1. 2. 3. 4. 5. 6. -A- MilliMeteRS Min 8.55 3.80 1.35 0.35 0.40 incheS Min 0.337 0.150 0.054 0.014 0.016 MAX 8.75 4.00 1.75 0.49 1.25 MAX 0.344 0.157 0.068 0.019 0.049 G 14 8 -BP + 0.010” (0.25mm) M B M 7 PL 1 7 1.27 BSC 0.18 0.10 5.80 0.25 0.25 0.25 6.20 0.50 0.05 BSC 0.007 0.004 0.229 0.010 0.009 0.008 0.244 0.019 D C R X 45° 0° - 10° -T- + 0.010” (0.25mm) M T B S A S 14 PL K J F noteS -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. PAD lAyout DiMenSionS DiM A B C D E noteS A B MilliMeteRS Min 1.14 0.64 6.22 3.94 1.02 incheS Min 0.045 0.025 0.245 0.155 0.040 MAX 1.40 0.89 4.17 1.27 MAX 0.055 0.035 0.165 0.050 E D C 1. Controlling dimension: inches. 05136.R11 2/11 Page 4 www.protekdevices.com 05136 Only One Name Means ProTek’Tion™ MMAD Series tAPe AnD Reel P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E Pin 1 F W K0 B0 A0 P User Direction of Feed SPeciFicAtionS Reel DiA. 178mm (7”) 1. 2. 3. 4. 5. 6. tAPe wiDth 16mm A0 B0 k0 D e F w P0 P2 P tmax 0.25 6.50 ± 0.10 9.5 ± 0.10 2.10 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 noteS Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 16mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 16mm tape. Bulk product shipped in tubes of 55 pieces per tube. Marking on Part - part number, date code, logo and pin one defined by dot on top of package. Package outline per document number 06006.R3 10/09 oRDeRing inFoRMAtion BASe PARt nuMBeR (xx = voltage) MMADxxxx MMADxxxx leADFRee SuFFiX -LF -LF tAPe SuFFiX -T7 -T13 Qty/Reel 1,000 2,500 Reel SiZe 7” 13” tuBe Qty 55 55 05136.R11 2/11 Page 5 www.protekdevices.com 05136 Only One Name Means ProTek’Tion™ MMAD Series coMPAny inFoRMAtion coMPAny PRoFile ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. contAct uS corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05136.R11 2/11 Page 6 www.protekdevices.com