MMAD1109

05089 PMMAD SERIES STEERING DIODE ARRAY APPLICATIONS ✔ ✔ ✔ ✔ High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet - 10/100 Base T Computer I/O Ports IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2(Line-Ground) & Level 3(Line-Line) SO-14 FEATURES ✔ 500 Milliwatt Continuous Power Dissipation ✔ ESD Protection > 40 kilovolts ✔ Low Insertion Loss & Cross-Talk ✔ Provides Protection for 8 I/O Lines ✔ Working Voltage > 50 Volts ✔ Low Leakage Current < 0.1µA ✔ Ultra Low Capacitance: 5pF Per Diode ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SO-14 Package Weight 0.15 grams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION + I/O PORT GND OR (-) 05089.R9 2/07 1 www.protekdevices.com PMMAD SERIES DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Continuous Power Dissipation Continuous Forward Current (Single Diode) Repetitive Peak Forward Current @ tp = 5µs, F = 50kHz Operating Temperature Storage Temperature SYMBOL PPK IP IFRM TA TSTG VALUE 500 400 700 -55 to 150 -55 to 150 UNITS Milliwatts mA mA °C °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER REPETITIVE PEAK REVERSE VOLTAGE @ 10µA VRRM VOLTS See Note 1 50 MAXIMUM FORWARD PEAK PULSE CURRENT @ 8/20µs IFM AMPS 40 @ 25°C Unless Otherwise Specified MAXIMUM REVERSE LEAKAGE CURRENT VRRM @ 40V IR µA 0.1 MAXIMUM CAPACITANCE (Per Diode) MAXIMUM FORWARD VOLTAGE @ 100mA VF VOLTS 1.2 @ 4V, 1MHz Cj pF 5 Note 1: Device types include: PMMAD1103, MMAD1105, PMMAD1106 and PMMAD1109. Electrical characteristics apply to all device types. 120 IPP - Peak Pulse Current - % of IPP FIGURE 1 PULSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t I /2 PP 10 15 t - Time - µs 20 25 30 05089.R9 2/07 2 www.protekdevices.com PMMAD SERIES PIN CONFIGURATIONS MMAD1103 1 14 MMAD1106 2 3 5 7 8 9 11 12 2 3 5 7 8 9 11 12 14 16 DIODE ARRAY NC PINS 4, 6, 10 & 13 8 LINES OF PROTECTION 8 DIODE COMMON ANODE ARRAY NC PIN 1, 4, 6, 10 & 13 8 LINES OF PROTECTION MMAD1105 14 7 8 MMAD1109 5 4 3 2 1 2 3 5 7 8 9 11 12 8 9 10 11 12 13 14 8 DIODE COMMON CATHODE ARRAY NC PINS 1, 4, 6, 10 & 13 8 LINES OF PROTECTION 7 ISOLATED DIODE ARRAY (INDEPENDENT) 7 LINES OF PROTECTION 05089.R9 2/07 3 www.protekdevices.com PMMAD SERIES SO-14 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE -A- SO-14 14 8 -BP 0.010” (0.25 MM) M BM 1 7 7 PL PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 8.55 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX DG C R X 45º 0º 10º -TK 0.010” (0.25 MM) M TBS J F AS 8 PL A B C D F G J K P R NOTES 1. 2. 3. 4. 5. 6. 10.00 0.386 0.393 4.00 0.150 0.157 1.75 0.054 0.068 0.49 0.014 0.019 1.25 0.016 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.008 0.009 0.25 0.004 0.009 6.20 0.229 0.244 0.50 0.010 0.019 MOUNTING PAD 0.050” TYP 0.030” ± 0.005” - T - = Seating Plane and Datum Surface. Dimensions “A” and “B” are Datum. Dimensions “A” and “B” do not include mold protrusions. Maximum mold protrusion is 0.015” (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e., PMMAD1107-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e., PMMAD1107-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PMMAD1107-LF-T13. 5. No Suffix = Product Shipped in Tubes of 55 pcs per Tube. Outline & Dimensions: Rev 1 - 11/01, 06006 0.160” ± 0.005” 0.245” MIN 0.045” ± 0.005” COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05089.R9 2/07 4