P0404FC3.3C

05154 P0404FC3.3C* thru P0404FC36C* PFLIP CHIP ARRAY APPLICATIONS ✔ Cellular Phones ✔ MCM Boards ✔ Wireless Communication Circuits ✔ IR LEDs ✔ SMART & PCMCIA Cards IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns 0402 CHIP SHOWN FEATURES ✔ ESD Protection > 25 kilovolts ✔ Available in Voltages Ranging From 3.3V to 36V ✔ 250 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ Bidirectional Configuration & Monolithic Structure ✔ Protects 1 to 3 Lines ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Standard EIA Chip Size: 0404 ✔ Weight 0.73 milligrams (Approximate) ✔ Available in Lead-Free Plating ✔ Solder Reflow Temperature: Lead-Free - Sn/Ag/Cu, 96/3.5/0.5: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Plastic & Paper Tape and Reel Per EIA Standard 481 ✔ Device Marking On Reel ✔ Top Contacts: Solder Bump 0.004” in Height (Nominal) PIN CONFIGURATION 05154.R6 2/07 1 www.protekdevices.com *U.S. Patent No. Des. “D456,367S” P0404FC3.3C* thru P0404FC36C* DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TA TSTG VALUE 250 -55 to 150 -55 to 150 UNITS Watts °C °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS 7.0 11.0 13.2 19.8 25.4 37.2 70.0 @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT (See Note 2) @VWM ID µA 75* 10** 10*** 1 1 1 1 TYPICAL CAPACITANCE VWM VOLTS P0404FC3.3C P0404FC05C P0404FC08C P0404FC12C P0404FC15C P0404FC24C P0404FC36C 3.3 5.0 8.0 12.0 15.0 24.0 36.0 @ 1mA V(BR) VOLTS 4.0 6.0 8.5 13.3 16.7 26.7 40.0 @8/20µs VC @ IPP 12.5V @ 20A 14.7V @ 17A 19.2V @ 13A 29.7V @ 9.0A 35.7V @ 7.0A 55.0V @ 5.0A 84.0V @ 3.0A @0V, 1 MHz C pF 150 100 75 50 40 30 25 Note 1: All devices are bidirectional. Electrical characteristics apply in both directions. Note 2: *Maximum leakage current < 5µA @ 2.8V. **Maximum leakage current