P5V0S1ULC

05308 Only One Name Means ProTek’Tion™ P5V0S1ULC Low CaPaCitanCe miniatURe tVS aRRaY DeSCRiPtion The P5V0S1ULC is a transient voltage suppressor array (TVS) designed to protect applications such as wireless telecommunication devices and portable electronics. The P5V0S1ULC is available in a bidirectional configuration with a working voltage of 5.0V and a minimum breakdown voltage of 6.0V. This device is rated for 110 Watt peak pulse power using the 8/20µs waveform, which is sufficient protection for tertiary type lightning threats at key interface locations. The P5V0S1ULC is also suited to protect data lines against ESD and EFT. This device meets the IEC 61000-4-2 and IEC 61000-4 requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device in conjunction with passive components integrated into a TVS/filter network can be used for EMI/RFI protection. DFn-2 PaCkaGe FeatUReS • • • • • • • • • • aPPLiCationS • • • • Ethernet 10/100/1000 Base T SMART Phones Portable Electronics USB Interfaces Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns 110 Watts Peak Pulse Power per Line (tp = 8/20µs) ESD Protection > 25 kilovolts Cable Discharge Event (CDE) Protection Bidirectional Configuration Provides 1 Line of Protection Low Capacitance RoHS Compliant REACH Compliant meChaniCaL ChaRaCteRiStiCS • • • • Molded JEDEC DFN-2-0402 Package Approximate Weight: 0.8 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 Pin ConFiGURation 1 2 05308.R1 3/11 Page 1 www.protekdevices.com 05308 Only One Name Means ProTek’Tion™ P5V0S1ULC tYPiCaL DeViCe ChaRaCteRiStiCS maXimUm RatinGS @ 25°C Unless otherwise Specified PaRameteR Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 Soldering Temperature for 10 seconds SYmBoL TA TSTG PPP TL VaLUe -55 to 150 -55 to 150 110 265 UnitS °C °C Watts °C eLeCtRiCaL ChaRaCteRiStiCS PeR Line @ 25°C Unless otherwise Specified PaRt nUmBeR DeViCe maRkinG RateD StanD-oFF VoLtaGe minimUm BReakDown VoLtaGe @ 1ma V(BR) VoLtS 6.0 maXimUm CLamPinG VoLtaGe (Fig. 2) @i P = 1a VC VoLtS 9.8 maXimUm LeakaGe CURRent @ 3.5V iD µa 1.0 tYPiCaL CaPaCitanCe Vwm VoLtS P5V0S1ULC O 5.0 @0V, 1mhz C pF 30 05308.R1 3/11 Page 2 www.protekdevices.com 05308 Only One Name Means ProTek’Tion™ P5V0S1ULC tYPiCaL DeViCe ChaRaCteRiStiCS FiGURe 1 Peak PULSe PoweR VS PULSe time 10,000 PPP - Peak Pulse Power - watts 1,000 110W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 iPP - Peak Pulse Current - % of iPP FiGURe 2 PULSe waVe FoRm tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t/(IPP/2) 10 15 t - time - µs 20 25 30 05308.R1 3/11 Page 3 www.protekdevices.com 05308 Only One Name Means ProTek’Tion™ P5V0S1ULC DFn-2-0402 PaCkaGe inFoRmation oUtLine DimenSionS Dim A B C H L1 L2 L3 L4 noteS L1 maX 0.041 0.025 0.019 0.007 0.013 0.011 0.011 0.009 miLLimeteRS min 0.99 0.58 0.43 0.13 0.28 0.23 0.23 0.18 inCheS min 0.039 0.023 0.017 0.005 0.011 0.009 0.009 0.007 maX 1.04 0.64 0.48 0.18 0.33 0.28 0.28 0.23 1 L2 TOP A BOTTOM 2 L3 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: inches. C END H B L4 PaD LaYoUt DimenSionS Dim A B C E F noteS A B miLLimeteRS min 0.737 0.331 0.356 1.423 0.534 inCheS min 0.029 0.013 0.014 0.056 0.021 maX 0.787 0.381 0.406 1.523 0.584 maX 0.031 0.015 0.016 0.060 0.023 C E 1. Controlling dimension: inches. 2. Decimal tolerances for mounting pad: ±0.003” (±0.08 mm). F Solder Print Diameter 0.010” - 0.012” 05308.R1 3/11 Page 4 www.protekdevices.com 05308 Only One Name Means ProTek’Tion™ P5V0S1ULC taPe anD ReeL 10 Pitches Cumulative Tolerance on tape ± 0.2 E T D P2 P0 Top Cover Tape K0 A0 B0 F W P User Direction of Feed SPeCiFiCationS ReeL Dia. 178mm (7”) 1. 2. 3. 4. 5. taPe wiDth 8mm a0 B0 k0 D e F w P0 P2 P tmax 0.25 0.70 ± 0.05 1.15 ± 0.05 0.60 ± 0.003 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 2.00 ± 0.05 noteS Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Empty pocket underneath sprocket holes. Suffix - T75 = 7” Reel - 5,000 pieces per 8mm tape (sprocket hole skipped). Marking on Part - marking code (see page 2). Package outline, pad layout and tape specifications per document number 06094.R1 3/11 - Option 1. oRDeRinG inFoRmation BaSe PaRt nUmBeR P5V0S1ULC LeaDFRee SUFFiX n/a taPe SUFFiX -T75 QtY/ReeL 5,000 ReeL SiZe 7” tUBe QtY n/a 05308.R1 3/11 Page 5 www.protekdevices.com 05308 Only One Name Means ProTek’Tion™ P5V0S1ULC ComPanY inFoRmation ComPanY PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContaCt US Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2009 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05308.R1 3/11 Page 6 www.protekdevices.com