PAM03SD2303CI

05347 Only One Name Means ProTek’Tion™ PAM03SD2303CI ultRA lOW CAPACItANCE tVS ARRAY DESCRIPtION The PAM03SD2303CI is an ultra low capacitance transient voltage suppressor array, designed to protect automotive applications. This device is available in a bidirectional configuration and is rated at 250 Watts for an 8/20µs waveshape. The PAM03SD2303CI meets IEC 61000-4-2 (ESD) and IEC 61000-4-4 (EFT) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device offers a ultra low capacitance and low leakage current in a miniature SOD-323 package. SOD-323 PACkAgE FEAtuRES • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Exceeds Level 4: Handles 10kV Contact & 25kV Air Discharge • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • 250 Watts Peak Pulse Power per Line (tp = 8/20µs) • Replacement for MLV (0805) • Bidirectional Configuration • Protects One Power or I/O Port • ESD Protection > 25kV • Low Clamping Voltage • Ultra Low Capacitance: 0.6pF (Typical) • RoHS Compliant • REACH Compliant APPlICAtIONS • Automotive Applications MEChANICAl ChARACtERIStICS • • • • Molded JEDEC SOD-323 Package Approximate Weight: 5 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIguRAtION 1 1 2 UNIDIRECTIONAL 05347.R0 12/11 2 BIDIRECTIONAL Page 1 www.protekdevices.com 05347 Only One Name Means ProTek’Tion™ PAM03SD2303CI tYPICAl DEVICE ChARACtERIStICS MAXIMuM RAtINgS @ 25°C unless Otherwise Specified PARAMEtER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOl PPP TA TSTG VAluE 250 -55 to 150 -55 to 150 uNItS Watts °C °C ElECtRICAl ChARACtERIStICS PER lINE @ 25°C unless Otherwise Specified PARt NuMBER DEVICE MARkINg RAtED StAND-OFF VOltAgE VWM VOltS PAM03SD2303CI CC 3.0 MINIMuM BREAkDOWN VOltAgE @ 1mA V(BR) VOltS 4.0 MAXIMuM ClAMPINg VOltAgE (Fig. 2) @ IP = 1A VC VOltS 7.0 MAXIMuM lEAkAgE CuRRENt @VWM ID µA 5 tYPICAl CAPACItANCE @0V, 1Mhz C pF 0.6 05347.R0 12/11 Page 2 www.protekdevices.com 05347 Only One Name Means ProTek’Tion™ PAM03SD2303CI tYPICAl DEVICE ChARACtERIStICS FIguRE 1 PEAk PulSE POWER VS PulSE tIME 10,000 PPP - Peak Pulse Power - Watts 1,000 250W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIguRE 2 PulSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t/(IPP/2) 10 15 t - time - µs 20 25 30 05347.R0 12/11 Page 3 www.protekdevices.com 05347 Only One Name Means ProTek’Tion™ PAM03SD2303CI SPICE MODEl FIguRE 1 SPICE MODEl I/O LCRD LCRD ABD Lg 0.6nH LCRD Lg 0.6nH ABD ABD I/O LCRD UNIDIRECTIONAL BIDIRECTIONAL ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance SPICE PARAMEtERS PARAMEtER BV IBV Cjo IS Vj M N RS TT EG uNIt V µA pF A V Ohms s eV ABD(tVS) 4.0 1 200 1E-11 0.6 0.33 1 0.22 1E-8 1.11 lCRD 100 0.5 0.3 1E-11 0.6 0.33 1 0.75 1E-9 1.11 05347.R0 12/11 Page 4 www.protekdevices.com 05347 Only One Name Means ProTek’Tion™ PAM03SD2303CI SOD-323 PACkAgE INFORMAtION OutlINE DIMENSIONS DIM A B C D E F H L NOtES C A E B MIllIMEtERS MIN 1.60 1.15 2.39 0.80 0.25 0.10 0.20 INChES MIN 0.063 0.045 0.094 0.031 0.010 0.004 0.008 MAX 1.90 1.45 2.70 1.10 0.40 0.20 0.10 - MAX 0.075 0.057 0.106 0.043 0.016 0.008 0.004 - F D H 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. L PAD lAYOut DIMENSIONS DIM A B C NOtES A MIllIMEtERS MIN 2.87 0.66 0.66 INChES MIN 0.113 0.026 0.026 MAX 3.12 0.91 0.91 MAX 0.123 0.036 0.036 B C 1. Controlling dimension: millimeters. 05347.R0 12/11 Page 5 www.protekdevices.com 05347 Only One Name Means ProTek’Tion™ PAM03SD2303CI tAPE AND REEl 10 Pitches Cumulative Tolerance on tape ± 0.2 E t D P2 P0 Top Cover Tape K0 A0 B0 Pin 1 Indicated by Band F W P User Direction of Feed SPECIFICAtIONS REEl DIA. 178mm (7”) 1. 2. 3. 4. tAPE WIDth 8mm A0 B0 k0 D E F W P0 P2 P tmax 0.25 1.55 ± 0.10 2.90 ± 0.10 1.35 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 NOtES Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2), polarity band (Unidirectional Only). Package outline, pad layout and tape specifications per document number 06010.R4 9/10. ORDERINg INFORMAtION BASE PARt NuMBER PAM03SD2303CI lEADFREE SuFFIX n/a tAPE SuFFIX -T7 QtY/REEl 3,000 REEl SIZE 7” tuBE QtY n/a This device is only available in a Lead-Free configuration. 05347.R0 12/11 Page 6 www.protekdevices.com 05347 Only One Name Means ProTek’Tion™ PAM03SD2303CI COMPANY INFORMAtION COMPANY PROFIlE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONtACt uS Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2011 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05347.R0 12/11 Page 7 www.protekdevices.com