PAM04ST430502

05348 Only One Name Means ProTek’Tion™ PAM04ST430502 ulTRA low cAPAciTAnce STeeRing diode/TVS ARRAy deScRiPTion The PAM04ST430502 is an ultra low capacitance (0.6pF) steering diode and TVS array combo. This device provides circuit protection for automotive applications. The PAM04ST430502 is ideally suited to protect USB data I/O ports against the effects of ESD and EFT. The PAM04ST430502 meets the requirements of IEC 61000-4-2 (ESD) and IEC 61000-4-4 (EFT). At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. The PAM04ST430502 offers a ultra low capacitance and low leakage current in a SOT-543 package. SoT-543 PAckAge FeATuReS • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • 200 Watts Peak Pulse Power per Line (tp = 8/20µs) • ESD Protection > 25 kilovolts • Low Clamping Voltage • Unidirectional Configuration • Protects 2 I/O Ports and Power Supply • Ultra Low Capacitance: 0.6pF • RoHS Compliant • REACH Compliant APPlicATionS • Automotive Applications MechAnicAl chARAcTeRiSTicS • • • • Molded JEDEC SOT-543 Package Approximate Weight: 3 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 Pin conFiguRATion GND 1 4 REF I/O 2 3 I/O 05348.R0 12/11 Page 1 www.protekdevices.com 05348 Only One Name Means ProTek’Tion™ PAM04ST430502 TyPicAl deVice chARAcTeRiSTicS MAXiMuM RATingS @ 25°c unless otherwise Specified PARAMeTeR Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Forward Voltage - IF = 1A, 8/20µs SyMBol TL TSTG PPP VF VAlue -55 to 150 -55 to 150 200 1.5 uniTS °C °C Watts Volts elecTRicAl chARAcTeRiSTicS PeR line @ 25°c unless otherwise Specified PART nuMBeR deVice MARking RATed STAnd-oFF VolTAge MiniMuM BReAkdown VolTAge @1mA V(BR) VolTS 6.0 VwM VolTS PAM04ST430502 noTe B5 5.0 MAXiMuM clAMPing VolTAge (Fig. 2) (note 2) @i P = 1A Vc VolTS 9.8 MAXiMuM clAMPing VolTAge (Fig. 2) (note 2) @ 8/20µs Vc @ i PP 20.0V @ 10.0A MAXiMuM leAkAge cuRRenT @VwM id µA 1 MAXiMuM cAPAciTAnce (Per data line) (Fig. 5) (note 1) @0V, 1Mhz c J(Sd) pF 0.6 1. As shown in Figure 5, REF 1 is connected to ground, REF 2 is connected to +VCC and input applies to VCC = 5V, VSIGN = 30mV, F = 1MHz. 2. Measured across pin 1 to pin 4. 10,000 FiguRe 1 PeAk PulSe PoweR VS PulSe TiMe PPP - Peak Pulse Power - watts 1,000 200W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse duration - µs 1,000 10,000 05348.R0 12/11 Page 2 www.protekdevices.com 05348 Only One Name Means ProTek’Tion™ PAM04ST430502 TyPicAl deVice chARAcTeRiSTicS FiguRe 2 PulSe wAVe FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 120 iPP - Peak Pulse current - % of iPP 100 80 % of Rated Power FiguRe 3 PoweR deRATing cuRVe Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 0 25 50 75 100 125 TA - Ambient Temperature - °c 150 FiguRe 4 oVeRShooT & clAMPing VolTAge 20 10 5 Volts per division 0 -10 -20 eSd Test Pulse - 5 kilovolt, 1/30ns (waveshape) FiguRe 5 inPuT cAPAciTAnce ciRcuiT REF2 I/O VSIGN G REF1 +VCC 05348.R0 12/11 Page 3 www.protekdevices.com 05348 Only One Name Means ProTek’Tion™ PAM04ST430502 SoT-543 PAckAge inFoRMATion ouTline diMenSionS diM A B C D G J K S R 1. 2. 3. 4. A MAX 0.067 0.051 0.024 0.011 C K MilliMeTeRS Min 1.50 1.10 0.50 0.17 0.50 BSC 0.08 0.10 1.50 0.05 0.18 0.30 1.70 0.15 incheS Min 0.059 0.043 0.020 0.007 MAX 1.70 1.30 0.60 0.27 R B 1 D J S 0.020 BSC 0.003 0.004 0.059 0.002 0.007 0.012 0.067 0.006 G noTeS Controlling dimension: inches. Dimensioning and tolerances per ANSI Y14.5M, 1985. Dimensions are exclusive of mold flash and metal burrs. Do not connect center stub. PAd lAyouT diMenSionS diM A B C D noTeS MilliMeTeRS noMinAl 1.02 1.20 0.30 0.51 incheS noMinAl 0.040 0.048 0.012 0.020 C B 1. Controlling dimension: inches. D A 05348.R0 12/11 Page 4 www.protekdevices.com 05348 Only One Name Means ProTek’Tion™ PAM04ST430502 TAPe And Reel P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 K0 Pin 1 F W B0 P User Direction of Feed SPeciFicATionS Reel diA. 178mm (7”) 1. 2. 3. 4. TAPe widTh 8mm A0 B0 k0 d e F w P0 P2 P tmax 0.25 1.78 ± 0.05 1.78 ± 0.05 0.69 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 noTeS Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2). Package outline, pad layout and tape specifications per document number 06074.R3 3/11. oRdeRing inFoRMATion BASe PART nuMBeR PAM04ST430502 leAdFRee SuFFiX n/a TAPe SuFFiX -T7 QTy/Reel 3,000 Reel SiZe 7” TuBe QTy n/a This device is only available in a Lead-Free configuration. 05348.R0 12/11 Page 5 www.protekdevices.com 05348 Only One Name Means ProTek’Tion™ PAM04ST430502 coMPAny inFoRMATion coMPAny PRoFile ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. conTAcT uS corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2011 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05348.R0 12/11 Page 6 www.protekdevices.com