PAM07DF23K24

05370 Only One Name Means ProTek’Tion™ PAM07DF23K24 3000 wAtt tVS CoMPonent DeSCRiPtion The PAM07DF23K24 is high-powered surface mount transient voltage suppression component designed to protect automotive systems from the damaging effects of high voltage spikes. The DFN-2-3KW surface mount package configuration provides a lower profile at a reduce cost. This device provide 3,000 Watts of peak pulse power dissipation for an 10/1000µs waveform. DFn-2-3Kw PACKAge F eAtuReS • IEC Compatibility 61000-4-5 (Surge): 48A, 8/20µs - L3(Line-Ground), L4(Line-Line) & L1 (Power) • 3,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional Configuration • Easy Mounting to Printed Circuit Board • RoHS Compliant • REACH Compliant APPliCAtionS • Automotive Applications MeChAniCAl ChARACteRiStiCS • • • • • • Molded DFN2-3KW Approximate Weight: 2.5 grams Lead-Free Silver Plating Solder Reflow Temperature: 260-270°C 12mm Tape and Reel Per EIA Standard 481 Flammability Rating UL 94V-0 CiRCuit DiAgRAM 05370.R0 2/12 Page 1 www.protekdevices.com 05370 Only One Name Means ProTek’Tion™ PAM07DF23K24 tyPiCAl DeViCe ChARACteRiStiCS MAXiMuM RAtingS @ 25°C unless otherwise Specified PARAMeteR Peak Pulse Power (tp = 10/1000µs) - See Figure 1 Storage Temperature Operating Temperature SyMBol PPP TSTG TL VAlue 3,000 -55 to 150 -55 to 150 unitS Watts °C °C eleCtRiCAl ChARACteRiStiCS PeR line @ 25°C unless otherwise Specified PARt nuMBeR MARKing CoDe RAteD StAnD-oFF VoltAge VwM VoltS PAM07DF23K24 3U24 24 MiniMuM BReAKDown VoltAge Min V(BR) VoltS 26.7 MAXiMuM leAKAge CuRRent @i t mA 1 @VwM iD µA 3 MAXiMuM ClAMPing VoltAge (Fig. 2) @ 10/1000µs VC @ i PP 43.0V @ 69.8A 05370.R0 2/12 Page 2 www.protekdevices.com 05370 Only One Name Means ProTek’Tion™ PAM07DF23K24 tyPiCAl DeViCe ChARACteRiStiCS FiguRe 1 PeAK PulSe PoweR VS PulSe tiMe 100 PPP - Peak Pulse Power - watts 10 3kW, 10/1000µs Waveform 1 0.1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 100,000 FiguRe 2 PulSe wAVeFoRM tf iPP - Peak Pulse Current - % of iPP 100 Peak Value IPP td = t/(IPP/2) TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 50 e-t 0 0 1 t - time - ms 2 3 05370.R0 2/12 Page 3 www.protekdevices.com 05370 Only One Name Means ProTek’Tion™ PAM07DF23K24 DFn-2-3Kw PACKAge inFoRMAtion outline DiMenSionS DiM A B C E F G H noteS A G E MilliMeteRS Min 5.44 6.45 1.16 0.66 1.93 3.91 4.27 inCheS Min 0.214 0.248 0.046 0.026 0.076 0.154 0.168 MAX 5.64 6.65 1.32 0.86 2.13 4.11 4.37 MAX 0.222 0.262 0.052 0.034 0.084 0.162 0.172 Polarity Band H BOTTOM TOP B F C 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: millimeters. 3. Dimensions are exclusive of mold flash and metal burrs. SIDE 05370.R0 2/12 Page 4 www.protekdevices.com 05370 Only One Name Means ProTek’Tion™ PAM07DF23K24 tAPe AnD Reel P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E Polarity Band K0 F W B0 A0 P User Direction of Feed SPeCiFiCAtionS Reel DiA. 330mm (13”) 1. 2. 3. 4. tAPe wiDth 12mm A0 B0 K0 D e F w P0 P2 P tmax 0.25 5.92 ± 0.10 6.93 ± 0.05 1.65 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 8.00 ± 0.10 noteS Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape. Marking on Part - marking code (see page 2). Package outline per document number 06096.R0 10/11. oRDeRing inFoRMAtion BASe PARt nuMBeR PAM07DF23K24 leADFRee SuFFiX n/a tAPe SuFFiX -T13 Qty/Reel 2,500 Reel SiZe 13” tuBe Qty n/a This device is only available in a Lead-Free configuration. 05370.R0 2/12 Page 5 www.protekdevices.com 05370 Only One Name Means ProTek’Tion™ PAM07DF23K24 CoMPAny inFoRMAtion CoMPAny PRoFile ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContACt uS Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05370.R0 2/12 Page 6 www.protekdevices.com