PAM14ST6305LCC

05358 Only One Name Means ProTek’Tion™ PAM14ST6305LCC MuLTi-Line Low CAPACiTAnCe TvS ARRAy DeSCRiPTion The PAM14ST6305LCC is a 5 Volt, low capacitance, multi-line TVS array. This device is designed to protect automotive applications from the damaging effects of ESD and EFT. The PAM14ST6305LCC is available in a 5 line unidirectional or 4 line bidirectional configuration with a working voltage of 5 Volts and a minimum breakdown voltage of 6 Volts. This device is rated at 25 Watts peak pulse power, which is sufficient protection for tertiary type lightning threats at key interface locations. Packaged in a miniature SOT-563, the PAM14ST6305LCC meets IEC 61000-4-2 (ESD) and 61000-4-4 (EFT) immunity requirements. Each device should be placed near a connector to provide the best protection against transients. SoT-563 PACkAGe FeATuReS • • • • • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns 25 Watts Peak Pulse Power per Line(tp = 8/20µs) Monolithic Design Available in 5 Volts Low Clamping Voltage ESD Protection > 25 kilovolts Low Leakage Current Low Capacitance: 9pF Protects 4 Bidirectional Lines & 5 Unidirectional Lines RoHS Compliant REACH Compliant APPLiCATionS • Automotive Applications MeChAniCAL ChARACTeRiSTiCS • • • • • • Molded JEDEC SOT-563 Package Approximate Weight: 3 milligrams Lead-Free Nickel Paladium Gold Plating Solder Reflow Temperature - 260-270°C Flammability Rating UL 94V-0 8mm Tape and Reel per EIA Standard 481 Pin ConFiGuRATion 1 2 3 6 5 4 05358.R0 12/11 Page 1 www.protekdevices.com 05358 Only One Name Means ProTek’Tion™ PAM14ST6305LCC TyPiCAL DeviCe ChARACTeRiSTiCS MAXiMuM RATinGS @ 25°C unless otherwise Specified PARAMeTeR Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Maximum Forward Voltage @ 10mA SyMBoL PPP TL TSTG VF vALue 25 -55 to 150 -55 to 150 1.0 uniTS Watts °C °C V eLeCTRiCAL ChARACTeRiSTiCS PeR Line @ 25°C unless otherwise Specified PART nuMBeR DeviCe MARkinG RATeD STAnD-oFF voLTAGe vwM voLTS PAM14ST6305LCC 1. Pins 1, 3, 4, 5 or 6 to pin 2. MiniMuM BReAkDown voLTAGe @ 1mA v(BR) voLTS 6.0 MAXiMuM CLAMPinG voLTAGe (Fig. 2) @ i P = 2A vC voLTS 12.0 MAXiMuM LeAkAGe CuRRenT @vwM iD µA 1 TyPiCAL CAPACiTAnCe (note 1) @0v, 1Mhz C pF 9 5LC 5.0 noTeS 05358.R0 12/11 Page 2 www.protekdevices.com 05358 Only One Name Means ProTek’Tion™ PAM14ST6305LCC TyPiCAL DeviCe ChARACTeRiSTiCS FiGuRe 1 PeAk PuLSe PoweR vS PuLSe TiMe 1,000 PPP - Peak Pulse Power - watts 100 25W, 8/20µs Waveform 10 1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 iPP - Peak Pulse Current - % of iPP FiGuRe 2 PuLSe wAve FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % of Rated Power FiGuRe 3 PoweR DeRATinG CuRve Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 05358.R0 12/11 Page 3 www.protekdevices.com 05358 Only One Name Means ProTek’Tion™ PAM14ST6305LCC SoT-563 PACkAGe inFoRMATion ouTLine DiMenSionS DiM A B C D G J K S noTeS 0.08 0.10 1.50 A MAX 0.067 0.051 0.024 0.011 C K MiLLiMeTeRS Min 1.50 1.10 0.50 0.17 0.50 BSC 0.18 0.30 1.70 inCheS Min 0.059 0.043 0.020 0.007 MAX 1.70 1.30 0.60 0.27 B 1 D J S 0.020 BSC 0.003 0.004 0.059 0.007 0.012 0.067 G 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. PAD LAyouT DiMenSionS DiM A B C D E noTeS MiLLiMeTeRS noMinAL 1.40 1.02 0.30 0.51 0.51 inCheS noMinAL 0.055 0.040 0.012 0.020 0.020 C E A 1. Controlling dimension: inches. D B 05358.R0 12/11 Page 4 www.protekdevices.com 05358 Only One Name Means ProTek’Tion™ PAM14ST6305LCC TAPe AnD ReeL P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 K0 Pin 1 F W B0 P User Direction of Feed SPeCiFiCATionS ReeL DiA. 178mm (7”) 1. 2. 3. 4. 5. TAPe wiDTh 8mm A0 B0 k0 D e F w P0 P2 P tmax 0.25 1.78 ± 0.05 1.78 ± 0.05 0.69 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 noTeS Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06051.R3 3/11. oRDeRinG inFoRMATion BASe PART nuMBeR PAM14ST6305LCC PAM14ST6305LCC LeADFRee SuFFiX n/a n/a TAPe SuFFiX -T7 -T13 QTy/ReeL 3,000 10,000 ReeL SiZe 7” 13” TuBe QTy n/a n/a This device is only available in a Lead-Free configuration. 05358.R0 12/11 Page 5 www.protekdevices.com 05358 Only One Name Means ProTek’Tion™ PAM14ST6305LCC CoMPAny inFoRMATion CoMPAny PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ConTACT uS Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2011 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05358.R0 12/11 Page 6 www.protekdevices.com