PAM24DF1605

05368 Only One Name Means ProTek’Tion™ PAM24DF1605 eMi FilteR/tvs ARRAy DescRiPtion The PAM24DF1605 is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The PAM24DF1605 is designed to suppress unwanted EMI/RFI signals and provide ESD protection for automotive applications. With a desired cutoff frequency of 110MHz, the PAM24DF1605P provides good EMI/RFI attenuation better than 35dB in the 800MHz - 3GHz bandwidth. This blocks RF noises from GSM, DCS or Bluetooth which can affect the baseband chipset and other blocks. Coupled with the integrated TVS diodes, this device is able to meet IEC 61000-42 (ESD) and 61000-4-4 (EFT) immunity requirements. DFn-16 PAckAge FeAtuRes • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns ESD Protection > 25 kilovolts EMI Filtering/TVS Low Pass Filters >25dB Attenuation from 800MHz to 3GHz Protects up to 8 Data Lines RoHS Compliant REACH Compliant APPlicAtions • Automotive Applications MechAnicAl chARActeRistics • • • • Molded JEDEC DFN-16SLP (Low Profile) Package Approximate Weight: 7 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 ciRcuit DiAgRAM & Pin conFiguRAtion 1 For Each Line I/On 100 Ohm I/On 2 3 4 5 6 7 8 GND 15pF GND I/O connected from pins 1-16, 2-15, 3-14, 5-12, 6-11, 7-10 and 8-9. 15pF 16 15 14 13 12 11 BOTTOM VIEW 10 9 05368.R0 1/12 Page 1 www.protekdevices.com 05368 Only One Name Means ProTek’Tion™ PAM24DF1605 tyPicAl Device chARActeRistics MAXiMuM RAtings @ 25°c unless otherwise specified PARAMeteR Operating Temperature Storage Temperature DC Power per Resistor Typical Resistance ±20% Soldering Temperature for 10 seconds syMBol TA TSTG P R TL vAlue -40 to 85 -55 to 150 100 100 265 units °C °C mW OHMs °C electRicAl chARActeRistics PeR line @ 25°c unless otherwise specified PARt nuMBeR Device MARking RAteD stAnD-oFF voltAge MiniMuM BReAkDoWn voltAge @ 1mA v(BR) volts 6.0 MAXiMuM ReveRse leAkAge cuRRent @ 3v iD µA 0.1 tyPicAl FoRWARD voltAge @ 10mA vF volts 0.8 MiniMuM cut-oFF tyPicAl AttenuAtion FRequency cAPAcitAnce (50 ohMs i/o) zeRo BiAs @ 800-3000 Mhz dB 25 vWM volts PAM24DF1605 168S 5.0 fc Mhz 110 @2.5v, 1Mhz c pF 30 05368.R0 1/12 Page 2 www.protekdevices.com 05368 Only One Name Means ProTek’Tion™ PAM24DF1605 tyPicAl Device chARActeRistics FiguRe 1 inseRtion loss -5 2.5 Volts -15 gain - dB 0 Volts -25 -35 0.1 1 10 100 Frequency - Mhz 1000 100000 1.10 normalized Resistance FiguRe 2 ResistAnce vs teMPeRAtuRe (normalized to Resistance at 25°c) 1.06 1.02 0.98 0.94 0.90 -40 -20 0 20 40 temperature - °c 60 80 100 05368.R0 1/12 Page 3 www.protekdevices.com 05368 Only One Name Means ProTek’Tion™ PAM24DF1605 tyPicAl Device chARActeRistics FiguRe 3 cAPAcitAnce vs ReveRse voltAge (normalized to capacitance at 2.5v Dc @ 25°c) 1.6 cj - capactiance(normalized) - pF 1.2 0.8 0.4 0 0 2 4 vR - Reverse voltage - volts 6 FiguRe 4 oveRshoot & clAMPing voltAge (through the Filter) 35 5 volts per Division 25 15 5 -5 esD test Pulse - 5 kilovolt, 1/30ns (Waveshape) 05368.R0 1/12 Page 4 www.protekdevices.com 05368 Only One Name Means ProTek’Tion™ PAM24DF1605 DFn-16slP(loW PRoFile) PAckAge inFoRMAtion outline DiMensions DiM P1 P2 P3 L1 L2 L3 p G1 G2 G4 A1 K notes 2.70 0.35 0.25 0.00 0.33 P1 MilliMeteRs Min 3.20 1.25 0.45 0.19 0.23 0.13 0.40 BSC 2.90 0.45 0.35 0.05 0.40 inches Min 0.126 0.049 0.018 0.007 0.009 0.005 MAX 3.40 1.45 0.60 0.28 0.30 0.18 MAX 0.134 0.057 0.024 0.011 0.012 0.007 P2 Pin 1 Reference TOP VIEW END VIEW 0.016 BSC 0.106 0.014 0.010 0.00 0.013 0.114 0.018 0.014 0.002 0.016 L3 SIDE VIEW L2 1 p 8 P3 A1 L1 G2 K 10 G1 BOTTOM VIEW 9 G4 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. 3. Dimension L1 applies to terminal and is measured between 0.25 and 0.30mm from terminal. 4. Coplanarity applies to the exposed pad as well as the terminals. PAD lAyout DiMensions DiM A B C D E F notes 0.25 0.20 MilliMeteRs Min 1.56 2.10 0.51 0.40 BSC 0.35 0.30 inches Min 0.061 0.083 0.020 E F C MAX 1.76 2.30 0.61 MAX 0.069 0.091 0.024 A 0.016 BSC 0.010 0.008 0.014 0.012 D B 1. Controlling dimension: millimeters. 05368.R0 1/12 Page 5 www.protekdevices.com 05368 Only One Name Means ProTek’Tion™ PAM24DF1605 tAPe AnD Reel 10 Pitches Cumulative Tolerance on tape ± 0.2 E t D P2 P0 Top Cover Tape K0 Pin 1 A0 B0 F W P User Direction of Feed sPeciFicAtions Reel DiA. 178mm (7”) 1. 2. 3. 4. tAPe WiDth 12mm A0 1.60 ± 0.10 B0 3.6 ± 0.10 k0 D e F 5.50 W P0 P2 P tmax 0.60 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 12.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.30 ± 0.05 notes Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and polarity dot. Package outline, pad layout and tape specifications per document number 06081.R0 3/11. oRDeRing inFoRMAtion BAse PARt nuMBeR PAM24DF1605 leADFRee suFFiX N/A tAPe suFFiX -T73 qty/Reel 3,000 Reel size 7” tuBe qty n/a This device is only available in a Lead-Free configuration. 05368.R0 1/12 Page 6 www.protekdevices.com 05368 Only One Name Means ProTek’Tion™ PAM24DF1605 coMPAny inFoRMAtion coMPAny PRoFile ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. contAct us corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05368.R0 1/12 Page 7 www.protekdevices.com