PDLC05

05327 Only One Name Means ProTek’Tion™ PDLC05 uLtRa Low CaPaCitanCe tvs aRRay DesCRiPtion The PDLC05 is an ultra low capacitance (typically 0.8p), transient voltage suppressor array. This device provides circuit protection for high-speed data transmission interfaces in wired and wireless computing and networking applications. The PDLC05 has a working voltage of 5V and offers protection in a SOT-23 package. This device meets the requirements of IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge). The PDLC05 offers a ultra low capacitance protection solution for circuits operating at high frequencies and faster edge rates, where insertion loss and signal integrity are serious concerns. sot-23 PaCkaGe F eatuRes • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(LineGround) & Level 2(Line-Line) • Low Clamping Voltage • Ultra Low Capacitance: 1pF (Typical) • RoHS Compliant • REACH Compliant aPPLiCations • • • • • High-Speed Data Transmission Interfaces Cellular Phones MP3 Players Portable Electronics Wireless Bus Protection meChaniCaL ChaRaCteRistiCs • • • • Molded JEDEC SOT-23 Package Approximate Weight: 8 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 Pin ConFiGuRation 1 3 2 05327.R0 9/10 Page 1 www.protekdevices.com 05327 Only One Name Means ProTek’Tion™ PDLC05 tyPiCaL DeviCe ChaRaCteRistiCs maXimum RatinGs @ 25°C unless otherwise specified PaRameteR Operating Temperature Storage Temperature Peak Pulse Current - 8/20µs (See Note 1) 1. Applies to unidirectional pins only. symBoL TL TSTG IPP(Max) vaLue -55 to 150 -55 to 150 15 units °C °C Amps note eLeCtRiCaL ChaRaCteRistiCs PeR Line @ 25°C unless otherwise specified PaRt numBeR DeviCe maRkinG RateD stanD-oFF voLtaGe vwm voLts PDLC05 L05 5.0 minimum BReakDown voLtaGe @ 1ma v(BR) voLts 6.0 maXimum CLamPinG voLtaGe (Fig. 1) @ i P = 1a vC voLts 9.8 maXimum LeakaGe CuRRent @v wm iD µa 5 tyPiCaL junCtion CaPaCitanCe PeR Line @0v, 1mhz C pF 0.8 120 iPP - Peak Pulse Current - % of iPP FiGuRe 1 PuLse wave FoRm tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 60 50 % of Rated Power FiGuRe 2 PoweR DeRatinG CuRve Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 40 30 20 0 Average Power td = t/(IPP/2) 10 15 t - time - µs 20 25 30 0 25 50 75 100 125 ta - ambient temperature - °C 150 05327.R0 9/10 Page 2 www.protekdevices.com 05327 Only One Name Means ProTek’Tion™ PDLC05 sot-23 PaCkaGe inFoRmation outLine Dimensions Dim A B C D G H J K L S V 1. 2. 3. 4. A L 3 B 1 2 K V G J S miLLimeteRs min 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.45 0.89 2.10 0.45 inChes min 0.110 0.047 0.035 0.015 0.070 0.001 0.003 0.018 0.035 0.083 0.018 maX 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.60 1.02 2.50 0.60 maX 0.120 0.055 0.044 0.020 0.081 0.004 0.007 0.024 0.040 0.098 0.024 0°-10° C D H notes Controlling dimension: inches. Dimensioning and tolerances per ANSI Y14.5M, 1985. Pin 3 is the cathode (Unidirectional Only) Dimensions are exclusive of mold flash and metal burrs. PaD Layout Dimensions Dim A B C D notes A miLLimeteRs min 0.71 1.88 0.71 0.81 inChes min 0.028 0.074 0.028 0.032 maX 0.97 2.13 0.97 1.07 maX 0.038 0.084 0.038 0.042 B C 1. Controlling dimension: inches. D 05327.R0 9/10 Page 3 www.protekdevices.com 05327 Only One Name Means ProTek’Tion™ PDLC05 taPe anD ReeL P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 K0 Pin 1 F W B0 P User Direction of Feed sPeCiFiCations ReeL Dia. 178mm (7”) 1. 2. 3. 4. 5. taPe wiDth 8mm a0 B0 k0 D e F w P0 P2 P tmax 0.228 3.15 ± 0.10 2.77 ± 0.10 1.30 ± 0.10 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 notes Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) & date code. Package outline, pad layout and tape specifications per document number 06012.R2 8/10. oRDeRinG inFoRmation Base PaRt numBeR PDLC05 PDLC05 LeaDFRee suFFiX n/a n/a taPe suFFiX -T7 -T13 Qty/ReeL 3,000 10,000 ReeL siZe 7” 13” tuBe Qty n/a n/a 05327.R0 9/10 Page 4 www.protekdevices.com 05327 Only One Name Means ProTek’Tion™ PDLC05 ComPany inFoRmation ComPany PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContaCt us Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2010 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05327.R0 9/10 Page 5 www.protekdevices.com