PIP30

05027 PHP8.4-PHP500 thru PIP8.4-PIP500 AC POWER BUS VOLTAGE SUPPRESSOR APPLICATIONS ✔ Secondary AC Power Supply ✔ Aircraft & Shipboard AC Power Bus ✔ Heavy Duty AC Switching Power IEC COMPATIBILITY ( EN61000-4) ✔ Meets the Following Military Specifications: - DOD-STD-1389 - MIL-STD-2036 - MIL-STD-704 - MIL-PRF-STD-19500/507 ✔ 7,500 & 15,000 Watts Peak Pulse Power per Line (tp=10/1000µs) ✔ Each Device 100% Tested ✔ Available in Multiple Voltages Ranging From: 8.4V to 500V PHP & PIP PACKAGE MECHANICAL CHARACTERISTICS ✔ Hermetically Sealed Glass to Metal Sub-Assemblies (PHP) ✔ Sub-Assemblies are Packaged in Molded Epoxy Case (PIP) ✔ Weight 46 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ Device Marking: Logo & Part Number ✔ Screening Available Upon Request - The PHP & PIP series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable test). Standard screening is available based on the following options: H1 - Submodule Screening per test plans 05231 & 05232 H2 - Submodule & Module Screening per test plan 05233 H3 - Submodule & Module Screening, Module Group B & C Lot Testing per test plans 05234 & 05235 MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 10/1000µs) - See Fig. 1 Operating Temperature Storage Temperature Steady State Power Disspiation @ 50°C SYMBOL PPP TL TSTG TA VALUE 7.5 & 15 -55 to 150 -55 to 150 7.5 UNITS kilowatts °C °C Watts 05027.R5 2/07 1 www.protekdevices.com PHP8.4-PHP500 thru PIP8.4-PIP500 DEVICE CHARACTERISTICS ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Notes 1-2) AVERAGE RMS VOLTAGE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE (See Note 1) @ 1mA V(BR) VOLTS 14 40 50 100 200 347 418 735 835 14 40 50 100 200 347 418 735 835 @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IPPM VC VOLTS 22 67 84 167 319 536 652 1138 1292 22 67 84 167 319 536 652 1138 1292 MAXIMUM LEAKAGE CURRENT MAXIMUM PEAK PULSE CURRENT MAXIMUM PEAK PULSE POWER VRMS VOLTS PHP8.4 PHP24 PHP30 PHP60 PHP120* PHP208 PHP250* PHP440 PHP500* PIP8.4 PIP24 PIP30 PIP60 PIP120* PIP208 PIP250* PIP440 PIP500* 8.4 24.0 30.0 60.0 120.0 208.0 250.0 440.0 500.0 8.4 24.0 30.0 60.0 120.0 208.0 250.0 440.0 500.0 VWM VOLTS 12.0 34.0 42.5 85.0 170.0 295.0 354.0 623.0 708.0 12.0 34.0 42.5 85.0 170.0 295.0 354.0 623.0 708.0 @VWM ID µA 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 IPPM AMPS 341 112 90 90 47 28 23 13.2 11.6 341 112 90 90 47 28 23 13.2 11.6 @ 1ms P PP KILOWATTS 7.5 7.5 7.5 15.0 15.0 15.0 15.0 15.0 15.0 7.5 7.5 7.5 15.0 15.0 15.0 15.0 15.0 15.0 Note 1: An * indicates that this series is recommended for marine applications. For military and aerospace applications, use the PHP Series. For industrial applications use the PIP Series Note 2: The following devices have a peak pulse power rating of 7,500W for a 10/1000µs waveform (see Figure 1): 8.4V, 24V and 30V. 05027.R5 2/07 2 www.protekdevices.com PHP8.4-PHP500 thru PIP8.4-PIP500 GRAPHS 1000 FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - killowatts 100 10 15kW 10/1000µs Waveform 7.5kW 10/1000µs Waveform 1 0.1 1 10 100 td - Pulse Duration - µs 1000 10000 100000 FIGURE 2 PULSE WAVE FORM 100 IPP - Peak Pulse Current - % of IPP 100 FIGURE 3 POWER DERATING CURVE Peak Pulse Power 10/1000µs 80 % Of Rated Power tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 60 td = t IPP/2 50 40 20 e-t 0 0 1 t - Time - ms 2 3 0 0 25 Average Power 50 75 100 125 TL - Lead Temperature - °C 150 05027.R5 2/07 3 www.protekdevices.com PHP8.4-PHP500 thru PIP8.4-PIP500 PACKAGE OUTLINE & DIMENSIONS PHP & PIP PACKAGE OUTLINE PHP & PIP PACKAGE A C B D G H DIM A B C D* E F* G H I* J DIMENSIONS MILLIMETERS MIN MAX 56.38 49.02 3.43 20.32 8.26 3.18 DIA 16.76 34.16 6.35 11.94 57.91 50.03 4.17 20.32 9.27 3.18 DIA 18.29 35.69 6.35 13.46 INCHES MIN MAX 2.22 2.28 1.93 1.97 0.135 0.165 0.800 0.800 0.325 0.365 0.125 DIA 0.125 DIA 0.660 0.720 1.345 1.405 0.250 0.250 0.47 0.53 E F J I Note*: Dimensions are nominal. COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05027.R5 2/07 4