PKFC05C

05180 Only One Name Means ProTek’Tion™ PKFC3.3C - PKFC36C 250w enCaPsulated FliP ChiP tvs aRRay desCRiPtion The PKFCxxC series encapsulated flip chips employ advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). Developed specifically for high-density circuit protection, this series meets the IEC 61000-4-2 and 61000-4-4 requirements. These devices are ideally suited for handheld devices, PCMCIA and SMART cards. This series provides ESD protection greater than 25 kilovolts with a peak pulse power dissipation of 250 Watts per line for an 8/20µs waveform. In addition, the PKFCxxC series features superior clamping performance, low leakage current characteristics and a response time of less than a nanosecond. Their low inductance virtually eliminates overshoot voltage due to package inductance. F eatuRes • • • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns Chip Scale Package 0.050” x 0.030” ESD Protection > 25 kilovolts Available in Voltages Ranging from 3.3V to 36V 250 Watts Peak Pulse Power per Line (tp = 8/20µs) Bidirectional Configuration & Monolithic Structure Protection for 1 Line RoHS Compliant REACH Compliant aPPliCations • • • • • Cellular Phones MCM Boards Wireless Communication Circuits IR LEDs SMART & PCMCIA Cards MeChaniCal ChaRaCteRistiCs • • • • • • • Encapsulated 0503 Flip Chip Approximate Weight: 0.73 milligrams Lead-Free Plating Solder Reflow Temperature: Lead-Free - Sn/Ag/Cu, 96/3.5/0.5: 260-270°C Flammability Rating UL 94V-0 8mm Tape per EIA Standard 481 CiRCuit diagRaM 05180.R6 7/11 Page 1 www.protekdevices.com 05180 Only One Name Means ProTek’Tion™ PKFC3.3C - PKFC36C tyPiCal deviCe ChaRaCteRistiCs MaXiMuM Ratings @ 25°C unless otherwise specified PaRaMeteR Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature syMBol PPP TA TSTG value 250 -55 to 150 -55 to 150 units Watts °C °C eleCtRiCal ChaRaCteRistiCs PeR line @ 25°C unless otherwise specified PaRt nuMBeR (note 1) deviCe MaRKing Rated stand-oFF voltage v wM volts PKFC3.3C PKFC05C PKFC08C PKFC12C PKFC15C PKFC24C PKFC36C notes 03 05 08 12 15 24 36 3.3 5.0 8.0 12.0 15.0 24.0 36.0 MiniMuM BReaKdown voltage @ 1ma v(BR) volts 4.0 6.0 8.5 13.3 16.7 26.7 40.0 MaXiMuM ClaMPing voltage (Fig. 2) @ i P = 1a vC volts 7.0 11.0 13.2 19.8 25.4 37.2 70.0 MaXiMuM ClaMPing voltage (Fig. 2) @ 8/20µs vC @ i PP 12.5V @ 20A 14.7V @ 17A 19.2V @ 13A 29.7V @ 9A 35.7V @ 7A 55.0V @ 5A 84.0V @ 3A MaXiMuM leaKage CuRRent (note 2) @vwM id µa 75* 10** 10*** 1 1 1 1 tyPiCal CaPaCitanCe @0v, 1Mhz C pF 150 100 75 50 40 30 25 1. All devices are bidirectional. Electrical characteristics apply in both directions. 2. *Maximum leakage current < 5µA @ 2.8V. **Maximum leakage current < 500nA @ 3.3V. ***Maximum leakage current < 200nA @ 5V. 05180.R6 7/11 Page 2 www.protekdevices.com 05180 Only One Name Means ProTek’Tion™ PKFC3.3C - PKFC36C tyPiCal deviCe ChaRaCteRistiCs FiguRe 1 PeaK Pulse PoweR vs Pulse tiMe 10,000 PPP - Peak Pulse Power - watts 1,000 250W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse duration - µs 1,000 10,000 120 iPP - Peak Pulse Current - % of iPP FiguRe 2 Pulse wave FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % of Rated Power FiguRe 3 PoweR deRating CuRve Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - time - µs 20 25 30 0 25 50 75 100 125 ta - ambient temperature - °C 150 05180.R6 7/11 Page 3 www.protekdevices.com 05180 Only One Name Means ProTek’Tion™ PKFC3.3C - PKFC36C tyPiCal deviCe ChaRaCteRistiCs FiguRe 4 oveRshoot & ClaMPing voltage FoR PKFC05C 35 25 5 volts per division 15 5 -5 esd test Pulse - 25 kilovolt, 1/30ns (waveshape) FiguRe 5 tyPiCal ClaMPing voltage vs PeaK Pulse CuRRent PKFC05C 12 vC - Clamping voltage - volts 8 4 0 0 5 10 iPP - Peak Pulse Current - amps 15 20 05180.R6 7/11 Page 4 www.protekdevices.com 05180 Only One Name Means ProTek’Tion™ PKFC3.3C - PKFC36C e0503 PaCKage inFoRMation outline diMensions diM A B C D F G H J K notes A H C MilliMeteRs Min 0.73 1.22 0.73 0.54 0.55 0.27 0.38 0.35 0.35 inChes Min 0.029 0.048 0.029 0.021 0.022 0.11 0.015 0.014 0.014 MaX 0.79 1.32 0.79 0.60 0.61 0.33 0.44 0.041 0.041 MaX 0.031 0.052 0.031 0.024 0.024 0.013 0.017 0.016 0.016 TOP B K BOTTOM J D SIDE F 1. Controlling dimensions in inches. 2. Maximum size 0.052” (1.321mm) by 0.036” (0.914mm) 3. All dimensions ±0.003”. layout diMensions diM A B C E F G notes A MilliMeteRs Min 1.00 0.62 1.44 0.18 0.49 0.31 inChes Min 0.039 0.024 0.056 0.007 0.019 0.012 MaX 1.04 0.66 1.50 0.22 0.63 0.035 MaX 0.041 0.026 0.060 0.009 0.021 0.014 B F G C E 1. Controlling dimensions in inches. 2. All dimensions ±0.003”. Solder Print Diameter 0.010” - 0.012” 05180.R6 7/11 Page 5 www.protekdevices.com 05180 Only One Name Means ProTek’Tion™ PKFC3.3C - PKFC36C taPe and Reel inFoRMation 10 Pitches Cumulative Tolerance on tape ± 0.2 E t D P2 P0 Top Cover Tape K0 A0 B0 F W P User Direction of Feed sPeCiFiCations Reel dia. 178mm(7”) 1. 2. 3. 4. 5. 6. taPe width 8mm a0 B0 K0 d e F w P0 P2 P tmax 0.25 0.89 ± 0.05 1.47 ± 0.10 0.81 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.20 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 notes Dimensions in millimeters. Top view of tape. Solder pads are face down in tape package. Orientation: preferred stencil - 0.1mm (0.004”). Surface mount product is taped and reeled in accordance with EIA 481. 8mm plastic tape: 7” Reels - 5,000. Marking on Reel - part number, date code and lot number. taPe & Reel oRientation Package outline, pad layout and tape specifications per document number 06040.R2 6/11. oRdeRing inFoRMation Base PaRt nuMBeR (xx = voltage) PKFCxxC leadFRee suFFiX -LF taPe suFFiX -T75-1 Qty/Reel 5,000 Reel siZe 7” XX tuBe Qty n/a This device is only available in a Lead-Free configuration. 05180.R6 7/11 Page 6 www.protekdevices.com 05180 Only One Name Means ProTek’Tion™ PKFC3.3C - PKFC36C CoMPany inFoRMation CoMPany PRoFile ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContaCt us Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2003 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. PATENT INFORMATION: Patent Pending 05180.R6 7/11 Page 7 www.protekdevices.com