PLC03-3.3

05173 PLC03-3.3 LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ T1/E1 Line Cards ✔ ISDN U-Interfaces & ISDN S/T Interfaces ✔ xDSL Interfaces ✔ Ethernet - 10/100/1000 Base T ✔ Set-Top Box IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - 94A, L4(Line-Gnd), 48A, L1(Power) & 48A, L4(Line-Line) SO-8 FEATURES ✔ ✔ ✔ ✔ ✔ ✔ 100A (2/10µs) per Bellcore GR1089(Intra-Building) ESD Protection > 40 kilovolts 1800 Watts Peak Pulse Power per Line (tp = 8/20µs) Low Capacitance: 8pF Typical Telecom/Diode Bridge RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 70 milligrams (Approximate) ✔ Available in Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined by Dot on Top of Package PIN CONFIGURATION 8 7 6 5 1 2 3 4 05173.R6 2/07 1 www.protekdevices.com PLC03-3.3 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TL TSTG VALUE 1800 -55 to 150 -55 to 150 UNITS Watts °C °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM SNAP-BACK VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE (See Note 3) MAXIMUM CAPACITANCE (See Note 4) MAXIMUM CLAMPING VOLTAGE (See Notes 1-2) (See Fig. 2) 8/20µs VC @ IPP 18.0V @ 100.0A V WM VOLTS PLC03-3.3 PBC 3.0 @ 50mA V(BR) VOLTS 2.8 @ VWM ID µA 2.0 @0V, 1 MHz C pF 25 @0V, 1 MHz C pF 12 MAXIMUM CLAMPING VOLTAGE Line-Ground 8/20µs @IP = 50A VC VOLTS 11 Note Note Note Note 1: 2: 3: 4: For an 8/20µs waveform, apply positive pulse to pin 1 or 8 to pin 2 or 3(ground). Measured between pin 1 or 8 to pin 2 or 3. Measured between I/O pins and ground (pin 1 to 2). Measured between I/O pins (pins 1 to 4). 05173.R6 2/07 2 www.protekdevices.com PLC03-3.3 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME 100 PPP - Peak Pulse Current - kilowatts 10 1800W, 8/20µs Waveform 1 0.1 0.01 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGURE 2 PULSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t I /2 PP 10 15 t - Time - µs 20 25 30 100 80 % Of Rated Power FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20µs 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 05173.R6 2/07 3 www.protekdevices.com PLC03-3.3 SO-8 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE -A- SO-8 8 5 -B - P + 0.010” (0.25 MM) M B M 4 PL DIM A B C D F G J K P R NOTES 1. 2. 3. 4. 5. 6. PACKAGE DIMENSIONS MILLIMETERS MIN MAX 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX 1 4 G D C R x 45° 0° - 10° K 0.010” (0.25 MM) M T B S A S 8 PL -T- + J F 0.196 5.00 0.189 0.150 0.157 4.00 1.75 0.054 0.068 0.49 0.014 0.019 0.049 1.250 0.016 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.004 0.008 0.25 6.20 0.229 0.244 0.019 0.50 0.010 MOUNTING PAD 0.050 ± 0.005” 0.030 ± 0.005” - T - = Seating Plane and Datum Surface. Dimensions “A” and “B” are Datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e. PLC03-3.3-T7.. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., PLC03-3.3-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PLC03-3.3-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. 0.160 ± 0.005” 0.245” MIN 0.045 ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06009 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05173.R6 2/07 4