PLC03-3.3_11

05173 Only One Name Means ProTek’Tion™ PLC03-3.3 HIGH POWER LOW CAPACITANCE TVS ARRAY DESCRIPTION The PLC03-3.3 is a low capacitance, high powered TVS array available in a SO-8 package. This device is designed to protect high speed data line applications from the damaging effects of ESD, EFT and secondary transient threats. The PLC03-3.3 has a peak pulse power rating of 1800 Watts for an 8/20µs waveshape. This devices meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-8 PACkAGE FEATuRES • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 94A, 8/20µs - Level 4(LineGnd), 48A, Level 1 (Power) & 48A, Level 4(Line-Line) • 100A (2/10µs) per Bellcore GR1089 (Intra-Building) • ESD Protection > 25 kilovolts • 1800 Watts Peak Pulse Power per Line (tp = 8/20µs) • Low Capacitance: 8pF Typical • Telecom/Diode Bridge • RoHS Compliant • REACH Compliant APPLICATIONS • • • • • T1/E1 Line Cards ISDN U-Interfaces & ISDN S/T Interfaces xDSL Interfaces Ethernet 10/100/1000 Base T Set Top Box Interface MECHANICAL CHARACTERISTICS • • • • Molded JEDEC SO-8 Package Approximate Weight: 70 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGuRATION 8 7 6 5 1 2 3 4 05173.R7 9/10 Page 1 www.protekdevices.com 05173 Only One Name Means ProTek’Tion™ PLC03-3.3 TYPICAL DEVICE CHARACTERISTICS MAXIMuM RATINGS @ 25°C unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 SYMBOL TL TSTG PPP VALuE -55 to 150 -55 to 150 1800 uNITS °C °C Watts ELECTRICAL CHARACTERISTICS PER LINE @ 25°C unless Otherwise Specified PART NuMBER DEVICE MARkING RATED STAND-OFF VOLTAGE MINIMuM SNAPBACk VOLTAGE @50mA V(BR) VOLTS 2.8 MAXIMuM CLAMPING VOLTAGE (Fig. 2) (Note 1-2) @ 8/20µs VC @ IPP 18.0V@100.0A VWM VOLTS PLC03-3.3 1. 2. 3. 4. MAXIMuM CLAMPING VOLTAGE (Line-Gnd) @ 8/20µs @IP = 50A VC VOLTS 11 MAXIMuM LEAkAGE CuRRENT @VWM ID µA 2.0 MAXIMuM MAXIMuM CAPACITANCE CAPACITANCE (Note 3) (Note 4) @0V, 1MHz C pF 25 @0V, 1MHz C pF 12 PBC 3.0 NOTES For an 8/20µs waveform, apply positive pulse to pin 1 or 8 to pin 2 or 3 (ground). Measured between pin 1 or 8 to pin 2 or 3. Measured between I/O pins and ground (pin 1 to 2). Measured between I/O pins (pin 1 to 4). 05173.R7 9/10 Page 2 www.protekdevices.com 05173 Only One Name Means ProTek’Tion™ PLC03-3.3 TYPICAL DEVICE CHARACTERISTICS FIGuRE 1 PEAk PuLSE POWER VS PuLSE TIME 100 PPP - Peak Pulse Power - kilowatts 10 1800W, 8/20µs Waveform 1 0.1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGuRE 2 PuLSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % Of Rated Power FIGuRE 3 POWER DERATING CuRVE Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 05173.R7 9/10 Page 3 www.protekdevices.com 05173 Only One Name Means ProTek’Tion™ PLC03-3.3 SO-8 PACkAGE INFORMATION OuTLINE DIMENSIONS DIM A B C D F G J K P R 1. 2. 3. 4. 5. 6. -A- MILLIMETERS MIN 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 0.25 0.25 6.20 0.50 INCHES MIN 0.189 0.150 0.054 0.014 0.016 0.05 BSC 0.007 0.004 0.229 0.010 0.009 0.008 0.244 0.019 K + 0.010” (0.25mm) M T B S A S 8 PL -TJ F MAX 5.00 4.00 1.75 0.49 1.25 MAX 0.196 0.157 0.068 0.019 0.049 G 8 5 -BP + 0.010” (0.25mm) M B M 4 PL 1 4 D C R x 45° 0° - 10° NOTES -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. PAD LAYOuT DIMENSIONS DIM A B C D E NOTES A B MILLIMETERS MIN 1.14 0.64 6.22 3.94 1.02 INCHES MIN 0.045 0.025 0.245 0.155 0.040 MAX 1.40 0.89 4.17 1.27 MAX 0.055 0.035 0.165 0.050 E D C 1. Controlling dimension: inches. 05173.R7 9/10 Page 4 www.protekdevices.com 05173 Only One Name Means ProTek’Tion™ PLC03-3.3 TAPE AND REEL P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E Pin 1 F W K0 B0 A0 P User Direction of Feed SPECIFICATIONS REEL DIA. 178mm (7”) 1. 2. 3. 4. 5. 6. TAPE WIDTH 12mm A0 B0 k0 D E F W P0 P2 P tmax 0.25 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 NOTES Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06011.R4 8/10. ORDERING INFORMATION BASE PART NuMBER PLC03-3.3 PLC03-3.3 LEADFREE SuFFIX -LF -LF TAPE SuFFIX -T7 -T13 QTY/REEL 1,000 2,500 REEL SIZE 7” 13” TuBE QTY 98 98 05173.R7 9/10 Page 5 www.protekdevices.com 05173 Only One Name Means ProTek’Tion™ PLC03-3.3 COMPANY INFORMATION COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT uS Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05173.R7 9/10 Page 6 www.protekdevices.com