PLC496_11

05109 Only One Name Means ProTek’Tion™ PLC496 500 WATT uLTRA LoW CAPACiTAnCe Tvs ARRAy DesCRiPTion The PLC496 is an ultra low capacitance TVS array that provides two lines of protection. This device protects high-frequency applications such as voice and data related systems and is designed to minimize the effects of high overshoot voltage experienced during and ESD event. The PLC496 has a peak pulse power rating of 500 Watts for an 8/20µs waveshape. This device meets the IEC 61000-42, IEC 61000-4-4 and IEC 61000-4-5 requirements. so-8 PACkAGe FeATuRes • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • 500 Watts Peak Pulse Power per Line (tp = 8/20µs) • Bidirectional Configuration • Low Clamping Voltage < 5 Volts • Ultra Low Capacitance: 1.25pF • RoHS Compliant • REACH Compliant APPLiCATions • • • • • Sensor & Control Circuits FireWire Ethernet - 10/100/1000 Base T Portable Electronics RF Applications MeChAniCAL ChARACTeRisTiCs • • • • Molded JEDEC SO-8 Package Approximate Weight: 70 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 Pin ConFiGuRATion 8 7 6 5 1 2 3 4 05109.R8 10/10 Page 1 www.protekdevices.com 05109 Only One Name Means ProTek’Tion™ PLC496 TyPiCAL DeviCe ChARACTeRisTiCs MAXiMuM RATinGs @ 25°C unless otherwise specified PARAMeTeR Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 syMBoL TL TSTG PPP vALue -55 to 150 -55 to 150 500 uniTs °C °C Watts eLeCTRiCAL ChARACTeRisTiCs PeR Line @ 25°C unless otherwise specified PART nuMBeR DeviCe MARkinG RATeD sTAnD-oFF voLTAGe MiniMuM BReAkDoWn voLTAGe (note 1) @1mA v(BR) voLTs 2.5 vWM voLTs PLC496 noTe VEC 1.0 MAXiMuM ReveRse LeAkAGe CuRRenT (note 1) @vWM iD µA 20 MAXiMuM CLAMPinG voLTAGe (note 1) (Fig. 2) @ 8/20µs vC @ i PP 12.5V @ 30A WoRkinG inveRse BLoCkinG voLTAGe (note 2) @ vWB voLTs 75 inveRse BLoCkinG LeAkAGe CuRRenT (note 2) @ vWB iR µA 1.0 MAXiMuM CAPACiTAnCe (note 3) @0v, 1Mhz C pF 1.25 1. Apply positive voltage from pin 4 to 1 and pin 8 to 5. 2. Apply positive voltage from pin 1 to 4 and 5 to 8. 3. Capacitance from pin 1 to 4 < 1.25pF. Capacitance from pin 8 to 5 < 1.25pF. 05109.R8 10/10 Page 2 www.protekdevices.com 05109 Only One Name Means ProTek’Tion™ PLC496 TyPiCAL DeviCe ChARACTeRisTiCs FiGuRe 1 PeAk PuLse PoWeR vs PuLse TiMe 10,000 PPP - Peak Pulse Power - Watts 1,000 500W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 iPP - Peak Pulse Current - % of iPP FiGuRe 2 PuLse WAve FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 05109.R8 10/10 Page 3 www.protekdevices.com 05109 Only One Name Means ProTek’Tion™ PLC496 TyPiCAL DeviCe ChARACTeRisTiCs FiGuRe 3 PoWeR DeRATinG CuRve Peak Pulse Power 8/20µs 100 80 % of Rated Power 60 40 20 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 FiGuRe 4 oveRshooT & CLAMPinG voLTAGe 35 25 5 volts per Division 15 5 -5 esD Test Pulse - 25 kilovolt, 1/30ns (Waveshape) 05109.R8 10/10 Page 4 www.protekdevices.com 05109 Only One Name Means ProTek’Tion™ PLC496 sPiCe MoDeL FiGuRe 1 sPiCe MoDeL I/O LCRD LCRD LCRD LCRD Lg 0.7nH LCRD LCRD LCRD LCRD Lg 0.7nH LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance TABLe 1 - sPiCe PARAMeTeRs PARAMeTeR BV IBV Cjo IS Vj M N RS TT EG uniT V µA pF A V Ohms s eV LCRD 200 0.01 5 1E-13 0.6 0.33 1 0.31 1E-9 1.11 05109.R8 10/10 Page 5 www.protekdevices.com 05109 Only One Name Means ProTek’Tion™ PLC496 APPLiCATion inFoRMATion FiGuRe 1 - DiFFeRenTiAL MoDe i/o PoRT PRoTeCTion Circuit connectivity is as follows: • Pins 1, 4, 5 and 8 are connected to the data lines. • Pins 2, 3, 6 and 7 are not connected. LINE 1 IN LINE 1 OUT 1 8 2 7 3 6 4 LINE 2 IN 5 LINE 2 OUT FiGuRe 2 - CoMMon MoDe sensoR PRoTeCTion Circuit connectivity is as follows: • Pins 1 and 8 connected to the dataline. • Pins 4 and 5 connected to ground. • Pins 2, 3, 6 and 7 are not connected. 1 8 SENSOR Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. NC 3 6 NC 4 5 1 8 NC 2 7 NC NC 3 6 NC 4 5 05109.R8 10/10 Page 6 www.protekdevices.com CIRCUITRY CiRCuiT BoARD ReCoMMenDATions NC 2 7 NC 05109 Only One Name Means ProTek’Tion™ PLC496 so-8 PACkAGe inFoRMATion ouTLine DiMensions DiM A B C D F G J K P R 1. 2. 3. 4. 5. 6. -A- MiLLiMeTeRs Min 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 0.25 0.25 6.20 0.50 inChes Min 0.189 0.150 0.054 0.014 0.016 0.05 BSC 0.007 0.004 0.229 0.010 0.009 0.008 0.244 0.019 K + 0.010” (0.25mm) M T B S A S 8 PL -TJ F MAX 5.00 4.00 1.75 0.49 1.25 MAX 0.196 0.157 0.068 0.019 0.049 G 8 5 -BP + 0.010” (0.25mm) M B M 4 PL 1 4 D C R x 45° 0° - 10° noTes -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. PAD LAyouT DiMensions DiM A B C D E noTes A B MiLLiMeTeRs Min 1.14 0.64 6.22 3.94 1.02 inChes Min 0.045 0.025 0.245 0.155 0.040 MAX 1.40 0.89 4.17 1.27 MAX 0.055 0.035 0.165 0.050 E D C 1. Controlling dimension: inches. 05109.R8 10/10 Page 7 www.protekdevices.com 05109 Only One Name Means ProTek’Tion™ PLC496 TAPe AnD ReeL P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E Pin 1 F W K0 B0 A0 P User Direction of Feed sPeCiFiCATions ReeL DiA. 178mm (7”) 1. 2. 3. 4. 5. 6. TAPe WiDTh 12mm A0 B0 k0 D e F W P0 P2 P tmax 0.25 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 noTes Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06011.R4 8/10. oRDeRinG inFoRMATion BAse PART nuMBeR PLC496 PLC496 LeADFRee suFFiX -LF -LF TAPe suFFiX -T7 -T13 QTy/ReeL 1,000 2,500 ReeL siZe 7” 13” TuBe QTy 98 98 05109.R8 10/10 Page 8 www.protekdevices.com 05109 Only One Name Means ProTek’Tion™ PLC496 CoMPAny inFoRMATion CoMPAny PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ConTACT us Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05109.R8 10/10 Page 9 www.protekdevices.com