05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION
The PLCDAxxC-6 Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and CMOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. The PLCDAxxC-6 Series has a peak pulse power rating of 500 Watts for an 8/20µs waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
SO-8 PACkAGE FEATURES
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • 500 Watts Peak Pulse Power per Line (tp = 8/20µs) • Bidirectional Configuration • Available in Multiple Voltages Ranging from 3V to 15V • Protects Up to Six Lines • Low Capacitance: 8pF • RoHS Compliant • REACH Compliant
APPLICATIONS
• Computer Interface Protection • Ethernet - 10/100/1000 Base T • Bluetooth & RF
MEChANICAL ChARACTERISTICS
• • • • Molded JEDEC SO-8 Package Approximate Weight: 70 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0
PIN CONFIGURATION
I/O 8 I/O 7 I/O 6 GND 5
1 I/O
2 I/O
3 I/O
4 GND
05102.R8 11/10
Page 1
www.protekdevices.com
05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
TYPICAL DEVICE ChARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1
SYMBOL
TL TSTG PPP
VALUE
-55 to 150 -55 to 150 500
UNITS
°C °C Watts
ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART NUMBER DEVICE MARkING RATED STAND-OFF VOLTAGE MINIMUM BREAkDOWN VOLTAGE @1mA V(BR) VOLTS
4.5 6.0 8.5 13.3 16.7
MAXIMUM CLAMPING VOLTAGE (Fig. 2) @I P = 1A VC VOLTS
7.0 9.8 13.4 19.0 24.0
MAXIMUM LEAkAGE CURRENT @V WM ID µA
125 20 10 2 2
MAXIMUM CAPACITANCE (Note 1) @0V, 1Mhz C pF
8 8 8 8 8
VWM VOLTS
PLCDA03C-6 PLCDA05C-6 PLCDA08C-6 PLCDA12C-6 PLCDA15C-6 NOTES PRS PRT PRW PRV PRU 3.3 5.0 8.0 12.0 15.0
1. Capacitance between I/O pins and ground (pins 4 and 5) is typically 8pF. Capacitance between I/O pins is typically 4pF.
10,000
FIGURE 1 PEAk PULSE POWER VS PULSE TIME
PPP - Peak Pulse Power - Watts
1,000
500W, 8/20µs Waveform
100
10
0.1
1
10 100 td - Pulse Duration - µs
1,000
10,000
05102.R8 11/10
Page 2
www.protekdevices.com
05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
TYPICAL DEVICE ChARACTERISTICS
FIGURE 2 PULSE WAVE FORM
tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs
120
IPP - Peak Pulse Current - % of IPP
100 80
% Of Rated Power
FIGURE 3 POWER DERATING CURVE
Peak Pulse Power 8/20µs
100 80 60 40 20 0
0 5
e-t
60 40 20 0
Average Power
td = t/(IPP/2)
10
15 t - Time - µs
20
25
30
0
25 50 75 100 125 TA - Ambient Temperature - °C
150
16
FIGURE 4 TYPCIAL CLAMPING VOLTAGE VS PEAk PULSE CURRENT FOR PLCDA05C-6
VC - Clamping Voltage - Volts
12
8
4
0
0
2
4
6
8 10 12 IPP - Peak Pulse Current - Amps
14
16
18
05102.R8 11/10
Page 3
www.protekdevices.com
05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
TYPICAL DEVICE ChARACTERISTICS
FIGURE 5 OVERShOOT & CLAMPING VOLTAGE FOR PLCDA05C-6 40
30
5 Volts per Division
20
10 0
ESD Test Pulse - 25 kilovolt, 1/30ns (Waveshape)
FIGURE 6 INSERTION LOSS - PLCDA05C-6 50 50
FIGURE 7 RETURN LOSS - PLCDA05C-6
10 db per Division
0
10 db per Division
20
20
0
-20
-20
-50
100 Mhz per Division
-50
100 Mhz per Division
05102.R8 11/10
Page 4
www.protekdevices.com
05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
SPICE MODEL
FIGURE 1 SPICE MODEL I/O ABD LCRD
LCRD Lg 0.6nH
ABD
ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance
TABLE 1 - SPICE PARAMETERS
PARAMETER
BV IBV Cjo IS Vj M N RS TT EG
UNIT
V µA pF A V Ohms s eV
ABD(TVS)
See Table 2 1 See Table 2 See Table 2 0.6 0.33 1 See Table 2 1E-8 1.11
LCRD
200 0.01 5 1E-13 0.6 0.33 1 0.31 1E-9 1.11
PART NUMBER
PLCDA03 PLCDA05 PLCDA15
TABLE 2 - ABD SPECIFIC SPICE PARAMETERS I S (AMPS) BV(VOLTS) Cjo(pF)
4.5 6.0 16.7 438 284 102 1E-11 1E-11 1E-13
Rs(OhMS)
0.21 0.14 0.52
05102.R8 11/10
Page 5
www.protekdevices.com
05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
APPLICATION INFORMATION
Line 6 Line 5 Line 4 Line 3 Line 2 Line 1
1
8
2
7
3
6
4
5
Circuit connectivity is as follows: • Line 1 connected to Pin 1. • Line 2 connected to Pin 2. • Line 3 connected to Pin 3. • Line 4 connected to Pin 8. • Line 5 connected to Pin 7. • Line 6 connected to Pin 6. • Pins 4 and 5 connected to ground.
FIGURE 1 - BIDIRECTIONAL COMMON-MODE PROTECTION FOR A TRANSCEIVER
CIRCUIT BOARD RECOMMENDATIONS
Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use ground vias.
05102.R8 11/10
Page 6
www.protekdevices.com
05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
SO-8 PACkAGE INFORMATION
OUTLINE DIMENSIONS
DIM
A B C D F G J K P R
1. 2. 3. 4. 5. 6.
-A-
MILLIMETERS MIN
4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 0.25 0.25 6.20 0.50
INChES MIN
0.189 0.150 0.054 0.014 0.016 0.05 BSC 0.007 0.004 0.229 0.010 0.009 0.008 0.244 0.019
K + 0.010” (0.25mm) M T B S A S 8 PL -TJ F
MAX
5.00 4.00 1.75 0.49 1.25
MAX
0.196 0.157 0.068 0.019 0.049
G
8
5 -BP + 0.010” (0.25mm) M B M 4 PL
1
4
D
C
R x 45° 0° - 10°
NOTES
-T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs.
PAD LAYOUT DIMENSIONS
DIM
A B C D E NOTES
A B
MILLIMETERS MIN
1.14 0.64 6.22 3.94 1.02
INChES MIN
0.045 0.025 0.245 0.155 0.040
MAX
1.40 0.89 4.17 1.27
MAX
0.055 0.035 0.165 0.050
E D C
1. Controlling dimension: inches.
05102.R8 11/10
Page 7
www.protekdevices.com
05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
TAPE AND REEL
P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2
E
Pin 1
F W
K0 B0
A0
P User Direction of Feed
SPECIFICATIONS
REEL DIA. 178mm (7”)
1. 2. 3. 4. 5. 6.
TAPE WIDTh 12mm
A0
B0
k0
D
E
F
W
P0
P2
P
tmax 0.25
6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10
NOTES
Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package.
Package outline, pad layout and tape specifications per document number 06011.R4 8/10.
ORDERING INFORMATION
BASE PART NUMBER (xx = Voltage)
PLCDAxxC-6 PLCDAxxC-6
LEADFREE SUFFIX
-LF -LF
TAPE SUFFIX
-T7 -T13
QTY/REEL
1,000 2,500
REEL SIZE
7” 13”
TUBE QTY
98 98
05102.R8 11/10
Page 8
www.protekdevices.com
05102
Only One Name Means ProTek’Tion™
PLCDA03C-6 - PLCDA15C-6
COMPANY INFORMATION
COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com
COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05102.R8 11/10
Page 9
www.protekdevices.com
很抱歉,暂时无法提供与“PLCDA12C-6”相匹配的价格&库存,您可以联系我们找货
免费人工找货