PLR0504F_11

05240 Only One Name Means ProTek’Tion™ PLR0504F uLtRa Low caPacitance steeRing diode/tvs aRRay descRiPtion The PLR0504F is subminiature, ultra low capacitance steering diode/TVS suppressor array designed for the protection of sensitive IC components from the damaging effects of Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). This device is ideally suited for use in portable electronics such as SMART phones, laptops, and other wireless devices as well as gigabit Ethernet applications. The PLR0504F provides protection in accordance with IEC 61000-4-2 and IEC 61000-4-4 requirements. This device is available in a SC70-6L package configuration and is rated at 200 Watts peak pulse power (8/20µs) per line. sc70-6L Package FeatuRes • • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns 200 Watts Peak Pulse Power per Line(tp = 8/20µs) ESD Protection > 25 kilovolts Protects 4 Data Lines Low Clamping Voltage Ultra Low Capacitance: 1.9pF Typical RoHS Compliant REACH Compliant aPPLications • • • • SMART Phones Portable Electronics Gigabit Ethernet USB 2.0, DVI, & Video Card Interfaces mechanicaL chaRacteRistics • • • • • • Molded JEDEC SC70-6L Package Approximate Weight: 7milligrams Lead-Free Nickel Paladium Gold Plating Solder Reflow Temperature: 260-270°C Flammability Rating UL 94V-0 8mm Tape and Reel per EIA Standard 481 Pin conFiguRation I/O 1 1 GND 2 I/O 2 3 6 I/O 4 5 REF 4 I/O 3 05240.R2 3/11 Page 1 www.protekdevices.com 05240 Only One Name Means ProTek’Tion™ PLR0504F tyPicaL device chaRacteRistics maXimum Ratings @ 25°c unless otherwise specified PaRameteR Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Forward Surge Rating (1/120 seconds @ 25°C, IF = 10mA) symBoL PPP TL TSTG VF vaLue 200 -55 to 150 -55 to 150 1.5 units Watts °C °C Volts eLectRicaL chaRacteRistics PeR Line @ 25°c unless otherwise specified PaRt numBeR device maRking Rated stand-oFF voLtage (note 1) vwm voLts PLR0504F 1. From I/O pin to ground. minimum BReakdown voLtage (note 1) @ 1ma v(BR) voLts 6.0 maXimum cLamPing voLtage (Fig. 2) (note 1) @ i P = 1a vc voLts 15.0 maXimum cLamPing voLtage (Fig. 2) (note 1) @ i P = 5a vc voLts 25.0 maXimum Leakage cuRRent (note 1) @v wm id µa 3 maXimum caPacitance (note 1) @0v, 1mhz cj(sd) pF 1.9 A5 5.0 notes 10,000 FiguRe 1 Peak PuLse PoweR vs PuLse time PPP - Peak Pulse Power - watts 1,000 200W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse duration - µs 1,000 10,000 05240.R2 3/11 Page 2 www.protekdevices.com 05240 Only One Name Means ProTek’Tion™ PLR0504F tyPicaL device chaRacteRistics FiguRe 2 PuLse wave FoRm tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 120 iPP - Peak Pulse current - % of iPP 100 80 % of Rated Power FiguRe 3 PoweR deRating cuRve Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - time - µs 20 25 30 0 25 50 75 100 125 ta - ambient temperature - °c 150 FiguRe 4 oveRshoot & cLamPing voLtage 35 5 volts per division 25 15 5 -5 esd test Pulse - 25 kilovolt, 1/30ns (waveshape) 05240.R2 3/11 Page 3 www.protekdevices.com 05240 Only One Name Means ProTek’Tion™ PLR0504F sc70-6L Package inFoRmation outLine dimensions dim A B C D E F G J K L M notes 0.80 0.08 2.00 0.26 D E miLLimeteRs min 1.90 1.15 0.80 0.15 0.65 BSC 1.30 BSC 1.10 0.25 2.40 0.10 0.46 inches min 0.074 0.045 0.031 0.005 maX 2.15 1.35 1.00 0.30 maX 0.084 0.055 0.040 0.012 6 5 4 K 1 2 3 L F A B M J 0° - 8° 0.026 BSC 0.051 BSC 0.031 0.003 0.078 0.010 0.043 0.010 0.095 0.004 0.018 C G 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. Pad Layout dimensions dim A B C D E notes B C E D miLLimeteRs nominaL 0.50 1.30 0.65 1.72 0.60 inches nominaL 0.020 0.051 0.026 0.068 0.024 A 1. Controlling dimension: inches. 05240.R2 3/11 Page 4 www.protekdevices.com 05240 Only One Name Means ProTek’Tion™ PLR0504F taPe and ReeL P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 K0 F W Pin 1 P B0 User Direction of Feed sPeciFications ReeL dia. 178mm (7”) 1. 2. 3. 4. taPe width 8mm a0 B0 k0 d e F w P0 P2 P tmax 0.25 2.25 ± 0.10 2.34 ± 0.10 1.22 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 notes Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06019.R5 3/11. oRdeRing inFoRmation Base PaRt numBeR PLR0504F LeadFRee suFFiX -P taPe suFFiX -T73 Qty/ReeL 3,000 ReeL siZe 7” tuBe Qty n/a 05240.R2 3/11 Page 5 www.protekdevices.com 05240 Only One Name Means ProTek’Tion™ PLR0504F comPany inFoRmation comPany PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. contact us corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05240.R2 3/11 Page 6 www.protekdevices.com