PLR0508_11

05276 Only One Name Means ProTek’Tion™ PLR0508 uLtRa Low caPacitance steeRing diode/tvs aRRay descRiPtion The PLR0508is an ultra low capacitance steering diode/TVS array. This device is designed to protect computing applications such as gigabit Ethernet, HDMI, USB and DVI interfaces as well as telecommunication equipment and systems. The PLR0508 is available in the space-saving DFN-10 package configuration and is rated at 200 Watts peak pulse current (8/20µs waveshape). This device meets the IEC 61000-4-2 (ESD), 61000-4-2 (EFT) and 61000-4-4 (Surge) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device in conjunction with passive components integrated into a TVS/filter network can be used for EMI/RFI protection. dFn-10 Package FeatuRes • • • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns 200 Watts Peak Pulse Power per Line(tp = 8/20µs) ESD Protection > 25 kilovolts Low Clamping Voltage Unidirectional Configuration Protects 8 I/O Ports & Power Supply or 8 Lines Ultra Low Capacitance : 1.6pF (I/O to I/O) RoHS Compliant REACH Compliant aPPLications • • • • Gigabit Ethernet DVI, USB and HDMI Interfaces High-Speed Data Line ESD Protection FireWire, SATA & PCIe Interfaces MechanicaL chaRacteRistics • • • • Molded JEDEC DFN-10 Package Approximate Weight: 7 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 ciRcuit diagRaM & Pin conFiguRation P1 P2 2 P3 3 P4 4 P5 5 P10 P9 P8 P7 P6 1 GND P1 P2 P3 P4 P5 10 9 8 P8 7 P7 6 P6 P10 P9 05276.R4 4/11 Page 1 www.protekdevices.com 05276 Only One Name Means ProTek’Tion™ PLR0508 tyPicaL device chaRacteRistics MaXiMuM Ratings @ 25°c unless otherwise specified PaRaMeteR Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature syMBoL PPP TL TSTG vaLue 200 -55 to 150 -55 to 150 units Watts °C °C eLectRicaL chaRacteRistics PeR Line @ 25°c unless otherwise specified PaRt nuMBeR device MaRking Rated stand-oFF voLtage MiniMuM BReakdown voLtage @ 1ma v(BR) voLts 6.0 vwM voLts PLR0508 1. From I/O Pin to I/O. 2. Across TVS only (Pin 3 to 8). MaXiMuM cLaMPing voLtage (Fig. 2) (note 2) @ i P = 1a vc voLts 9.8 MaXiMuM cLaMPing voLtage (Fig. 2) (note 2) @ i P = 5a vc voLts 13.0 MaXiMuM Leakage cuRRent @v wM id µa 1.0 tyPicaL caPacitance (note 1) @0v, 1Mhz c J(sd) pF 1.6 508 5.0 note 05276.R4 4/11 Page 2 www.protekdevices.com 05276 Only One Name Means ProTek’Tion™ PLR0508 tyPicaL device chaRacteRistics FiguRe 1 Peak PuLse PoweR vs PuLse tiMe 10,000 PPP - Peak Pulse Power - watts 1,000 200W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse duration - µs 1,000 10,000 120 iPP - Peak Pulse current - % of iPP FiguRe 2 PuLse wave FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % of Rated Power FiguRe 3 PoweR deRating cuRve Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - time - µs 20 25 30 0 25 50 75 100 125 ta - ambient temperature - °c 150 05276.R4 4/11 Page 3 www.protekdevices.com 05276 Only One Name Means ProTek’Tion™ PLR0508 tyPicaL device chaRacteRistics FiguRe 4 oveRshoot & cLaMPing voLtage 35 25 5 volts per division 15 5 -5 esd test Pulse - 25 kilovolt, 1/30ns (waveshape) FiguRe 5 inseRtion Loss 20 10 db per division Ref 0 -20 300 Mhz per division 05276.R4 4/11 Page 4 www.protekdevices.com 05276 Only One Name Means ProTek’Tion™ PLR0508 dFn-10 Package inFoRMation outLine diMensions diM A A2 D D2 E E2 e L M notes 0.35 0.25 2.50 2.10 2.50 1.21 0.50 BSC 0.45 0.45 D MiLLiMeteRs Min 0.45 0.13 BSC 2.70 2.20 2.70 1.31 inches Min 0.017 e 1 M E D2 E2 L 10 BOTTOM VIEW 6 5 MaX 0.55 MaX 0.021 0.005 BSC 0.097 0.083 0.097 0.046 0.105 0.085 0.105 0.051 Pin 1 Reference TOP VIEW 0.020 BSC 0.013 0.010 0.017 0.018 A2 SIDE VIEW A 1. Controlling dimension: millimeters. 2. Dimensioning and tolerances per ANSI Y14.M, 1985. 3. Coplanarity applies to the exposed pad as well as the terminals. Pad Layout diMensions diM A B C D E F notes A MiLLiMeteRs noMinaL 2.25 1.42 2.90 0.50 BSC 0.30 0.58 inches noMinaL 0.089 0.056 0.114 0.020 BSC 0.012 0.023 BC F E D 1. Controlling dimension: millimeters. 05276.R4 4/11 Page 5 www.protekdevices.com 05276 Only One Name Means ProTek’Tion™ PLR0508 taPe and ReeL 10 Pitches Cumulative Tolerance on tape ± 0.2 E t D P2 P0 Top Cover Tape K0 A0 B0 F W Pin 1 P User Direction of Feed sPeciFications ReeL dia. 178mm (7”) 1. 2. 3. 4. taPe width 8mm a0 B0 k0 d e F w P0 P2 P tmax 0.25 2.90 ± 0.10 2.90 ± 0.10 0.80 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 notes Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T73 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and polarity dot. Package outline, pad layout and tape specifications per document number 06080.R0 3/11. oRdeRing inFoRMation Base PaRt nuMBeR PLR0508 LeadFRee suFFiX -LF taPe suFFiX -T73 Qty/ReeL 3,000 ReeL siZe 7” tuBe Qty n/a 05276.R4 4/11 Page 6 www.protekdevices.com 05276 Only One Name Means ProTek’Tion™ PLR0508 coMPany inFoRMation coMPany PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. contact us corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2006 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05276.R4 4/11 Page 7 www.protekdevices.com