PLW0501D

05263 PLW0501D STANDARD CAPACITANCE TVS COMPONENT APPLICATIONS ✔ ✔ ✔ ✔ Ethernet - 10/100/1000 Base T Cellular Phones Personal Digital Assistant (PDA) USB Interfaces IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns DFN-2 FEATURES ✔ 150 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ ESD Protection > 25 kilovolts ✔ Cable Discharge Event (CDE) Protection ✔ Unidirectional Configuration ✔ Provides One Line of Protection ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded DFN-2 Package Weight 0.8 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Polarity Band PIN CONFIGURATION 1 2 05263.R2 2/1/07 1 www.protekdevices.com PLW0501D DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Pulse Current (tp = 8/20µ) Soldering Temperature for 10 seconds Typical Forward Voltage @10mA SYMBOL TA TSTG PPP IPP TL VF VALUE -55 to 150 -55 to 150 150 10 265 0.8 UNITS °C °C Watts A °C V ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) IP @ 1A VC VOLTS 9.8 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE V WM VOLTS PLW0501D 4 5.0 @ 1mA V(BR) VOLTS 6.0 @VWM ID µA 1.0 @0V, 1 MHz C pF 70 Note 1: Measured between I/O pins and ground. FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10,000 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 1,000 e-t 100 150W, 8/20µs Waveform td = t I /2 PP 10 0.01 1 10 100 td - Pulse Duration - µs 1,000 10,000 0 5 10 15 20 t - Time - µs 25 30 05263.R2 2/1/07 2 www.protekdevices.com PLW0501D DFN-2 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE A H C PACKAGE DIMENSIONS INCHES DIM A B C D E F H MILLIMETERS MAX 0.025 0.042 0.022 0.014 0.016 0.014 0.013 MIN 0.023 0.038 0.018 0.010 0.012 0.010 0.011 NOR 0.024 0.040 0.020 0.012 0.014 0.012 0.012 MIN 0.58 0.97 0.46 0.25 0.30 0.25 0.28 NOR 0.61 1.02 0.51 0.30 0.36 0.30 0.30 MAX 0.64 1.07 0.56 0.36 0.41 0.36 0.33 1 D TOP B BOTTOM E SIDE NOTES 2 MOUNTING PAD A F 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad : ± 0.003” (±0.08mm). 3. Maximum size: 0.052” (1.321mm) by 0.036” (0.914mm). PAD DIMENSIONS DIM MILLIMETERS 0.762 ± 0.025 0.356 ± 0.025 0.381 ± 0.025 1.473 ± 0.050 0.559 ± 0.025 INCHES 0.030 ± 0.001 0.014 ± 0.001 0.015 ± 0.001 0.058 ± 0.002 0.022 ± 0.001 B C E A B C E F TAPE & REEL ORIENTATION F Solder Print Diameter 0.010” - 0.012” TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T75 = 7 Inch Reel - 5,000 pieces per 8mm tape, i.e., PLW0501D-T75. 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PLW0501D-LF-T75. NOTE 1. Top view of tape. Solder PADS face down in tape package. Outline & Dimensions: Rev 1 - 9/05, 0659 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7”)/330mm(13”) Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 0.80± 0.10 1.20± 0.10 0.70 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 2.00 ±0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top cover tape A0 K0 B0 F W P User Direction of Feed COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05263.R2 2/1/07 3