PLW1201H

05275 PLW1201H STANDARD CAPACITANCE TVS COMPONENT APPLICATIONS ✔ ✔ ✔ ✔ Ethernet - 10/100/1000 Base T Cellular Phones Personal Digital Assistant (PDA) USB Interfaces IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns SC-79 FEATURES ✔ ✔ ✔ ✔ ✔ ✔ 200 Watts Peak Pulse Power per Line (tp=8/20µs) Cable Discharge Event (CDE) Protection ESD Protection > 25 kilovolts Unidirectional Configuration Protects One Unidirectional Line RoHS Compliant MECHANICAL CHARACTERISTICS ✔ Molded EIAJ SC-79 Package ✔ Weight 2 milligrams (Approximate) ✔ Available Lead-Free Pure-Tin Plating (Annealed) ✔ Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code & Polarity Band (Unidirectional Only) PIN CONFIGURATION 1 2 05275.R0 1/08 1 www.protekdevices.com PLW1201H DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Pulse Current (tp = 8/20µs) Operating Temperature Storage Temperature Soldering Temperature for 10 seconds SYMBOL PPP IPP TA TSTG TL VALUE 200 5 -55 to 150 -55 to 150 265 UNITS Watts A °C °C °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE TYPICAL FORWARD VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) VWM VOLTS PLW1201H 12 12.0 @ 1mA V(BR) VOLTS 13.3 @10mA VF VOLTS 0.8 @IP = 1A VC VOLTS 19.0 @IP = 5A VC VOLTS 24.0 @V WM ID µA 1 @0V, 1MHz C pF 50 FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10,000 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 1,000 200W, 8/20µs Waveform e-t 100 td = t I /2 PP 10 0.01 1 10 100 td - Pulse Duration - µs 1,000 10,000 0 5 10 15 t - Time - µs 20 25 30 05275.R0 1/08 2 www.protekdevices.com PLW1201H SC-79 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE C A SC79 PACKAGE B F PACKAGE DIMENSIONS INCHES DIM A B C D E F NOTES 1. Controlling Dimensions in Millimeters. 2. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T73 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., PLW1201H-T73. 0.015” (0.38mm) MILLIMETERS MIN 1.10 0.70 1.50 0.50 0.08 MAX 1.30 0.90 1.70 0.70 0.20 MIN 0.043 0.028 0.059 0.020 0.003 MAX 0.049 0.035 0.066 0.028 0.008 D E 0.012 BSE 0.30 BSE MOUNTING PAD 0.075” (1.90mm) 0.020” (0.50mm) Outline & Dimensions: Rev 2 - 9/05, 06037 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7”) Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 1.00 ± 0.10 1.95 ± 0.05 0.75 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top cover tape Empty Pocket K0 B0 A0 Pin 1 Indicated by Band F W P User Direction of Feed COPYRIGHT © ProTek Devices 2008 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05275.R0 1/08 3