PLW1201H_11

05275 Only One Name Means ProTek’Tion™ PLW1201H 200 Watt tVS COMPONENt DESCRiPtiON The PLW1201H is a transient voltage suppressor array designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics. This device is available in a unidirectional configuration with a working voltage of 12.0V and a minimum breakdown voltage of 13.3V. The PLW1201H is rated at 200W peak pulse power (8/20µs), which is sufficient protection for tertiary type lightning threats at key interface locations. The PLW1201H is ideally suited to protect data I/O ports against ESD and EFT. This device meets the requirements of IEC 61000-2 and IEC 61000-4-4. Packaged in a SC-79 configuration, this device can be substituted for similar 0803 outlines. SC-79 PaCkagE FEatuRES • • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns 200 Watts Peak Pulse Power per Line (tp = 8/20µs) Cable Discharge Event (CDE) Protection Replacement for MLV (0803) One Unidirectional Line of Protection Unidirectional Configuration RoHS Compliant REACH Compliant aPPLiCatiONS • Ethernet - 10/100/1000 Base T • SMART Phones • Portable Electronics MECHaNiCaL CHaRaCtERiStiCS • • • • Molded JEDEC SC-79 Package Approximate Weight: 2 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PiN CONFiguRatiON 1 2 05275.R1 9/10 Page 1 www.protekdevices.com 05275 Only One Name Means ProTek’Tion™ PLW1201H tyPiCaL DEViCE CHaRaCtERiStiCS MaXiMuM RatiNgS @ 25°C unless Otherwise Specified PaRaMEtER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Pulse Current (tp = 8/20µs) Operating Temperature Storage Temperature Soldering Temperature for 10 seconds SyMBOL PPP IPP TA TSTG TL VaLuE 200 10 -55 to 150 -55 to 150 265 uNitS Watts Amps °C °C °C ELECtRiCaL CHaRaCtERiStiCS PER LiNE @ 25°C unless Otherwise Specified PaRt NuMBER DEViCE MaRkiNg RatED StaND-OFF VOLtagE VWM VOLtS PLW1201H 12 12.0 MiNiMuM BREakDOWN VOLtagE @ 1ma V(BR) VOLtS 13.3 tyPiCaL FORWaRD VOLtagE @ 10ma VF VOLtS 0.8 MaXiMuM CLaMPiNg VOLtagE (Fig. 2) @ i P = 1a VC VOLtS 19.0 MaXiMuM CLaMPiNg VOLtagE (Fig. 2) @ i P = 5a VC VOLtS 24.0 MaXiMuM LEakagE CuRRENt @VWM iD µa 1 tyPiCaL CaPaCitaNCE @0V, 1MHz C pF 50 05275.R1 9/10 Page 2 www.protekdevices.com 05275 Only One Name Means ProTek’Tion™ PLW1201H tyPiCaL DEViCE CHaRaCtERiStiCS FiguRE 1 PEak PuLSE POWER VS PuLSE tiME 10,000 PPP - Peak Pulse Pulse - Watts 1,000 200W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 iPP - Peak Pulse Current - % of iPP FiguRE 2 PuLSE WaVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t/(IPP/2) 10 15 t - time - µs 20 25 30 05275.R1 9/10 Page 3 www.protekdevices.com 05275 Only One Name Means ProTek’Tion™ PLW1201H SC-79 PaCkagE iNFORMatiON OutLiNE DiMENSiONS DiM A B C D E F NOtES C A MiLLiMEtERS MiN 1.10 0.70 1.50 0.50 0.08 0.30 BSE iNCHES MiN 0.043 0.028 0.059 0.020 0.003 MaX 1.30 0.90 1.70 0.70 0.20 MaX 0.049 0.035 0.066 0.028 0.008 F B 0.012 BSE E D 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: millimeters. 3. Dimensions are exclusive of mold flash and metal burrs. PaD LayOut DiMENSiONS DiM A B C NOtES A MiLLiMEtERS MiN 1.85 0.38 0.25 iNCHES MiN 0.070 0.015 0.010 MaX 2.03 0.64 0.51 MaX 0.080 0.025 0.020 B C 1. Controlling dimension: millimeters 05275.R1 9/10 Page 4 www.protekdevices.com 05275 Only One Name Means ProTek’Tion™ PLW1201H taPE aND REEL 10 Pitches Cumulative Tolerance on tape ± 0.2 E t D P0 P2 Top Cover Tape K0 A0 B0 Pin 1 Indicated by Band F W P User Direction of Feed SPECiFiCatiONS REEL Dia. 178mm (7”) 1. 2. 3. 4. 5. taPE WiDtH 8mm a0 B0 k0 D E F W P0 P2 P tmax 0.25 1.00 ± 0.10 1.95 ± 0.05 0.075 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 NOtES Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Empty pocket between sprocket holes. Suffix - T74 = 7” Reel - 4,000 pieces per 8mm tape. Marking on Part - marking code (see page 2), polarity band and date code. Package outline, pad layout and tape specifications per document number 06037.R3 8/10. ORDERiNg iNFORMatiON BaSE PaRt NuMBER PLW1201H LEaDFREE SuFFiX -n/a taPE SuFFiX -T74 Qty/REEL 4,000 REEL SiZE 7” tuBE Qty n/a 05275.R1 9/10 Page 5 www.protekdevices.com 05275 Only One Name Means ProTek’Tion™ PLW1201H COMPaNy iNFORMatiON COMPaNy PROFiLE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONtaCt uS Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2008 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05275.R1 9/10 Page 6 www.protekdevices.com