RSB6.8S-LF-T7

05176 RSB6.8S Only One Name Means ProTek’Tion™ LOW CAPACITANCE TVS ARRAY Description The RSB6.8S is a low capacitance, transient voltage suppressor designed to protect applications such as wireless telecommunication devices, PCMCIA cards and portable electronics. This device is available in a bidirectional configuration with a working voltage of 4.7V and a minimum breakdown voltage of 5.7V. The RSB6.8S is rated at 10W peak pulse power (10/1000µs), which is sufficient protection for ESD threats at key interface locations. The RSB6.8S is ideally suited to protect 5V DC lines and data I/O ports against ESD and EFT. This device meets the requirements of IEC 61000-2 and IEC 61000-4-4. Packaged in a SC-79 configuration, this device can be substituted for similar 0803 outlines. SC-79 package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • 10 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Bidirectional Configuration • Replacement for MLV (0803) • Low Clamping Voltage • Low Capacitance • RoHS Compliant • REACH Compliant • Noise Suppression for Data/Audio Lines • SMART Phones • Digital Cameras • Laptop Computers Mechanical characteristics • Molded JEDEC SC-79 Package • Approximate Weight: 2 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATION 1 2 05176.R9 4/13 Page 1 www.protekdevices.com 05176 RSB6.8S Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 10 Watts Peak Pulse Power (tp = 10/1000µs) - See Figure 1 Power Dissipation PD 150 mW Operating Temperature TA -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Junction Temperature TL 150 °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1) device marking RSB6.8S C5 RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT maximum CAPACITANCE VWM VOLTS @ 1mA V(BR) VOLTS @3.5V ID µA @0V, 1MHz C pF 4.7 5.7 0.5 30 Note 1. Bidirectional device. Test both polarities. 05176.R9 4/13 Page 2 www.protekdevices.com 05176 RSB6.8S Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - Watts 1,000 100 10W, 10/1000µs Waveform 10 1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 100,000 figure 2 PULSE WAVEFORM IPP - Peak Pulse Current - % of IPP tf TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 100 Peak Value IPP td = t/(IPP/2) 50 e-t 0 0 1 2 3 t - Time - ms 05176.R9 4/13 Page 3 www.protekdevices.com 05176 RSB6.8S Only One Name Means ProTek’Tion™ sc-79 package information outline dimensions dim millimeters C A inches min max min max A 1.10 1.30 0.043 0.049 B 0.70 0.90 0.028 0.035 C 1.50 1.70 0.059 0.066 D 0.50 0.70 0.020 0.028 E 0.08 0.20 0.003 0.008 F 0.30 BSE B F 0.012 BSE E NOTEs D 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: millimeters. 3. Dimensions are exclusive of mold flash and metal burrs. A pad layout dimensions dim millimeters inches min max min max A 1.85 2.03 0.070 0.080 B 0.38 0.64 0.015 0.025 C 0.25 0.51 0.010 0.020 B C NOTES 1. Controlling dimension: millimeters 05176.R9 4/13 Page 4 www.protekdevices.com 05176 RSB6.8S Only One Name Means ProTek’Tion™ TAPE AND REEL D t Top Cover Tape P2 P0 10 Pitches Cumulative Tolerance on tape ± 0.2 E A0 F K0 W B0 P User Direction of Feed specifications Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 1.00 ± 0.10 1.95 ± 0.05 0.075 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 tmax 0.25 Notes 1. 2. 3. 4. 5. Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Empty pocket between sprocket holes. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and date code. Package outline, pad layout and tape specifications per document number 06037.R3 8/10. ORDERING INFORMATION base PART NUMBER LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty RSB6.8S n/a -T7 3,000 7” n/a This device is only available in a Lead-Free configuration. 05176.R9 4/13 Page 5 www.protekdevices.com 05176 RSB6.8S Only One Name Means ProTek’Tion™ company information COMPANY PROFILE In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products. These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses (NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: & Marketing: 602-414-5109 Customer Service: 602-414-5114 Product Technical Support: 602-414-5107 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com ProTek Devices (Asia Pacific) Pte. Ltd. 8 Ubi Road 2, #06-19 Zervex Singapore - 408538 Tel: +65-67488312 Fax: +65-67488313 Web www.protekdevices.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05176.R9 4/13 Page 6 www.protekdevices.com