SM15KPA220CA

05293 Only One Name Means ProTek’Tion™ SM15KPA17A - SM15KPA220CA 15kW SuRfACe Mount PoWeR tvS CoMPonent DeSCRiPtion The SM15KPA Series are high-powered surface mount transient voltage suppression components designed to protect equipment and systems from the damaging effects of high voltage spikes. The surface mount package configuration provides a lower profile at a reduce cost compared to legacy axial lead package configurations. These devices provide 15,000 Watts of peak pulse power dissipation for an 10/1000µs waveform. Applications include AC and DC power line protection, terrestrial base station protection as well as module lightning protection. SMD-15 PACKAge feAtuReS • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(LineGround), L4(Line-Line) & L1 (Power) • 15,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bidirectional Configurations • Easy Mounting to Printed Circuit Board • Available in Multiple Voltages • tClamping (0V to V(BR)Min) < 100ps, Theoretical for Unidirectional and 5ns for Bidirectional • RoHS Complaint (Exemption #7) APPliCAtionS • • • • Relay Drives Motor (Start/Stop) Back EMF Protection Module Lightning Protection Secondary Lightning Protection for AC/DC MeChAniCAl ChARACteRiStiCS • • • • • • Black Molded Case Approximate Weight: 2.5 grams Lead-Free Silver Plating Solder Reflow Temperature: 240-250°C Flammability Rating UL 94V-0 Marking: Logo, Marking Code and Date Code CiRCuit DiAgRAMS unidirectional Bidirectional 05293.R2 3/12 Page 1 www.protekdevices.com 05293 Only One Name Means ProTek’Tion™ SM15KPA17A - SM15KPA220CA tyPiCAl DeviCe ChARACteRiStiCS MAXiMuM RAtingS @ 25°C unless otherwise Specified PARAMeteR Peak Pulse Power (tp = 10/1000µs) - See Figure 1 Forward Surge Rating Steady State Power Dissipation Storage Temperature Operating Temperature SyMBol PPP IF PP TSTG TL vAlue 15,000 200 1.0 -55 to 150 -55 to 150 unitS Watts Amps Watts °C °C eleCtRiCAl ChARACteRiStiCS PeR line @ 25°C unless otherwise Specified uniDiReCtionAl PARt nuMBeR (notes 1 - 2) MARKing CoDe RAteD StAnD-off voltAge vWM voltS SM15KPA17A SM15KPA30A SM15KPA33A SM15KPA48A noteS 17A 30A 33A 48A 17.0 30.0 33.0 48.0 MiniMuM BReAKDoWn voltAge Min v(BR) voltS 18.9 33.3 36.7 53.3 MAXiMuM leAKAge CuRRent @vWM iD µA 5000 15 10 10 MAXiMuM ClAMPing voltAge (fig. 2) @ 10/1000µS vC @ i PP 29.3V @ 512.0A 50.7V @ 296.0A 54.8V @ 274.0A 77.7V @ 193.0A teMPeRAtuRe CoeffiCient of v(BR) qv(BR) mv/°C 17 34 38 56 @i t mA 50 5 5 5 1. Devices shown are preferred voltages. Consult factory for additional voltages. 2. VF(MAX) = 15 Volts @ 200A, 8.3ms (1/2 Sine Wave) - unidirectional configuration only. eleCtRiCAl ChARACteRiStiCS PeR line @ 25°C unless otherwise Specified BiDiReCtionAl PARt nuMBeR (note 1) MARKing CoDe RAteD StAnD-off voltAge vWM voltS SM15KPA30CA SM15KPA43CA SM15KPA54CA SM15KPA58CA SM15KPA78CA SM15KPA220CA noteS 30C 43C 54C 58C 78C 220C 30.0 43.0 54.0 58.0 78.0 220.0 MiniMuM BReAKDoWn voltAge Min v(BR) voltS 33.3 47.8 60.0 64.4 86.7 245.0 MAXiMuM leAKAge CuRRent @vWM iD µA 15 10 10 10 10 10 MAXiMuM ClAMPing voltAge (fig. 2) @ 10/1000µS vC @ i PP 50.7V @ 296.0A 69.7V @ 215.0A 87.5V @ 171.0A 94.0V @ 160.0A 126.0V @ 119.0A 356.0V @ 42.0A teMPeRAtuRe CoeffiCient of v(BR) qv(BR) mv/°C 34 50 63 68 93 269 @i t mA 5 5 5 5 5 5 1. Devices shown are preferred voltages. Consult factory for additional voltages. 05293.R2 3/12 Page 2 www.protekdevices.com 05293 Only One Name Means ProTek’Tion™ SM15KPA17A - SM15KPA220CA tyPiCAl DeviCe ChARACteRiStiCS figuRe 1 PeAK PulSe PoWeR vS PulSe tiMe 1,000 PPP - Peak Pulse Power - kilowatts 100 15kW, 10/1000µs Waveform 10 1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 100,000 figuRe 2 PulSe WAvefoRM tf iPP - Peak Pulse Current - % of iPP 100 100 figuRe 3 PoWeR DeRAting CuRve TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs Peak Pulse Power 10/1000µs 80 % of Rated Power Peak Value IPP td = t/(IPP/2) 50 60 40 20 e 0 0 1 -t 2 t - time - ms 3 0 0 25 50 75 100 125 150 tl - lead temperature - °C 05293.R2 3/12 Page 3 www.protekdevices.com 05293 Only One Name Means ProTek’Tion™ SM15KPA17A - SM15KPA220CA SMD-15 PACKAge infoRMAtion PACKAge outline DiMenSionS DiM A B C D E F G H J K L M N P Q R T W V MilliMeteRS Min 13.46 9.52 5.08 8.15 2.55 6.65 2.65 3.15 2.25 3.15 1.25 2.51 0.70 0.70 0.80 0.80 8.12 0.25 5.08 inCheS Min 0.530 0.375 0.200 0.321 0.100 0.262 0.104 0.124 0.090 0.124 0.049 0.099 0.028 0.028 0.031 0.031 0.320 0.010 0.200 Bottom View B MAX 14.22 9.78 5.18 8.25 2.65 6.75 3.15 3.25 2.54 3.25 1.35 2.61 0.80 0.80 1.03 1.03 9.14 0.50 5.18 MAX 0.560 0.385 0.204 0.325 0.104 0.266 0.124 0.128 0.100 0.128 0.053 0.103 0.031 0.031 0.041 0.041 0.360 0.020 0.204 K G R L J H A F M EV QP C D N Side View T W Suggested Solder Pad Q P N K J R T Package outline, pad layout and tape specifications per document number 06090.R1 3/12 05293.R2 3/12 Page 4 ML CD H EF www.protekdevices.com G T 05293 Only One Name Means ProTek’Tion™ SM15KPA17A - SM15KPA220CA W SMD-15 PACKAge infoRMAtion SolDeR PAD outline DiMenSionS DiM A B C D E F G H J K L M N P Q R T MilliMeteRS Min 8.35 8.55 5.35 5.55 6.85 7.05 2.75 2.95 5.35 5.55 2.75 2.95 2.45 3.25 3.95 3.55 3.65 inCheS Min 0.329 0.337 0.211 0.219 0.270 0.278 0.108 0.116 0.211 0.219 0.108 0.116 0.096 0.128 0.156 0.140 0.144 MAX 8.45 8.65 5.45 5.65 6.95 7.15 2.85 3.05 5.45 5.65 2.85 3.05 2.55 3.35 4.05 3.65 3.75 MAX 0.333 0.341 0.215 0.222 0.274 0.281 0.112 0.120 0.215 0.222 0.112 0.120 0.100 0.132 0.159 0.144 0.148 Suggested Solder Pad Q P N K J R T ML CD H EF G A B SolDeR PRint outline DiMenSionS DiM A B C D E F G H J Suggest Solder Print J H G E D A MilliMeteRS Min 8.35 5.35 6.85 2.75 5.35 2.75 2.45 3.25 3.55 inCheS Min 0.329 0.211 0.270 0.108 0.211 0.108 0.096 0.128 0.140 MAX 8.45 5.45 6.95 2.85 5.45 2.85 2.55 3.35 3.65 MAX 0.333 0.215 0.274 0.112 0.215 0.112 0.100 0.132 0.144 F B C 05293.R2 3/12 Page 5 www.protekdevices.com 05293 Only One Name Means ProTek’Tion™ SM15KPA17A - SM15KPA220CA CoMPAny infoRMAtion CoMPAny PRofile ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContACt uS Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2010 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05293.R2 3/12 Page 6 www.protekdevices.com