SM1624

05147 Only One Name Means ProTek’Tion™ SM1603 - SM1624C 500 WATT MULTI-LINE TVS ARRAY DESCRIPTIoN The SM16xx and SM16xxC Series are multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. This series has a peak pulse power rating of 500 Watts for an 8/20µs waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. So-16 PACkAGE FEATURES • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(LineGnd) & Level 2(Line-Line) • 500 Watts Peak Pulse Power per Line (tp = 8/20µs) • Unidirectional and Bidirectional Configurations • ESD Protection > 25 kilovolts • Available in Multiple Voltages Ranging from 3.3V to 24V • Protects up to 8 Lines • RoHS Compliant • REACH Compliant APPLICATIoNS • • • • Wireless Communication Circuits RS-422, RS-432 & RS-485 Low Voltage ASICs Portable Electronics MEChANICAL ChARACTERISTICS • • • • Molded JEDEC SO-16 Package Approximate Weight: 0.15 grams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 16mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CoNFIGURATIoNS 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 UNIDIRECTIONAL 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 BIDIRECTIONAL 05147.R7 1/11 Page 1 www.protekdevices.com 05147 Only One Name Means ProTek’Tion™ SM1603 - SM1624C TYPICAL DEVICE ChARACTERISTICS MAXIMUM RATINGS @ 25°C Unless otherwise Specified PARAMETER Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 SYMBoL TL TSTG PPP VALUE -55 to 150 -55 to 150 500 UNITS °C °C Watts ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless otherwise Specified PART NUMBER (Note 1-2) RATED STAND-oFF VoLTAGE MINIMUM BREAkDoWN VoLTAGE @1mA V(BR) VoLTS 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.7 16.7 26.7 26.7 MAXIMUM CLAMPING VoLTAGE (Fig. 2) @I P = 1A VC VoLTS 7.0 7.0 9.8 9.8 13.4 13.4 19.0 19.0 25.5 25.5 40.0 40.0 MAXIMUM CLAMPING VoLTAGE (Fig. 2) @8/20µs VC @ IPP 10.9V @ 43A 10.9V @ 43A 13.5V @ 42A 13.5V @ 42A 16.9V @ 34A 16.9V @ 34A 25.9V @ 21A 25.9V @ 21A 30.0V @ 17A 30.0V @ 17A 49.0V @ 12A 49.0V @ 12A MAXIMUM LEAkAGE CURRENT @V WM ID µA 125 125 10 10 10 10 2 2 2 2 2 2 MAXIMUM CAPACITANCE TEMPERATURE CoEFFICIENT oF V(BR) VWM VoLTS SM1603 SM1603C SM1605 SM1605C SM1608 SM1608C SM1612 SM1612C SM1615 SM1615C SM1624 SM1624C NoTES 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 24.0 24.0 @0V, 1Mhz C pF 800 450 550 310 500 280 185 105 140 80 88 50 qV(BR) mV/°C -3 -3 3 3 9 9 16 16 17 17 26 26 1. Part numbers with a “C” suffix are bidirectional devices, i.e., SM1615C. 2. VF = 1.5 Volts @ 100mA, 300µs (square wave) unidirectional devices only. 05147.R7 1/11 Page 2 www.protekdevices.com 05147 Only One Name Means ProTek’Tion™ SM1603 - SM1624C TYPICAL DEVICE ChARACTERISTICS FIGURE 1 PEAk PULSE PoWER VS PULSE TIME 10,000 PPP - Peak Pulse Power - Watts 1,000 500W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGURE 2 PULSE WAVE FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % of Rated Power FIGURE 3 PoWER DERATING CURVE Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 05147.R7 1/11 Page 3 www.protekdevices.com 05147 Only One Name Means ProTek’Tion™ SM1603 - SM1624C So-16 PACkAGE INFoRMATIoN oUTLINE DIMENSIoNS DIM A B C D F G J K P R 1. 2. 3. 4. 5. 6. -A- MILLIMETERS MIN 9.80 3.80 1.35 0.35 0.40 INChES MIN 0.386 0.150 0.054 0.014 0.016 MAX 10.00 4.00 1.75 0.49 1.25 MAX 0.393 0.157 0.068 0.019 0.049 G D R X 45° 1 8 16 9 -B- P + 0.010” (0.25mm) M B M 8 PL 1.27 BSC 0.18 0.10 5.80 0.25 0.25 0.25 6.20 0.50 0.05 BSC 0.007 0.004 0.229 0.010 0.009 0.008 0.244 0.019 C 0° - 10° -T- NoTES + 0.010” (0.25mm) M T B S A S 16 PL K F J -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. PAD LAYoUT DIMENSIoNS DIM A B C D E NoTES A MILLIMETERS MIN 1.14 0.64 6.22 3.94 1.02 INChES MIN 0.045 0.025 0.245 0.155 0.040 B MAX 1.40 0.89 4.17 1.27 MAX 0.055 0.035 0.165 0.050 E D C 1. Controlling dimension: inches. 05147.R7 1/11 Page 4 www.protekdevices.com 05147 Only One Name Means ProTek’Tion™ SM1603 - SM1624C TAPE AND REEL P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E Pin 1 F W K0 B0 A0 P User Direction of Feed SPECIFICATIoNS REEL DIA. 178mm (7”) 1. 2. 3. 4. 5. 6. TAPE WIDTh 16mm A0 B0 k0 D E F W P0 P2 P tmax 0.25 6.50 ± 0.10 10.30 ± 0.10 2.10 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 NoTES Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 16mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 16mm tape. Bulk product shipped in tubes of 48 pieces per tube. Marking on Part - part number, date code, logo and pin one defined by dot on top of package. Package outline per document number 06007.R3 1/11. oRDERING INFoRMATIoN BASE PART NUMBER (xx = Voltage) SM16xx/SM16xxC SM16xx/SM16xxC LEADFREE SUFFIX -LF -LF TAPE SUFFIX -T7 -T13 QTY/REEL 1,000 2,500 REEL SIZE 7” 13” TUBE QTY 48 48 05147.R7 1/11 Page 5 www.protekdevices.com 05147 Only One Name Means ProTek’Tion™ SM1603 - SM1624C CoMPANY INFoRMATIoN CoMPANY PRoFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CoNTACT US Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05147.R7 1/11 Page 6 www.protekdevices.com