SM1624C

05147 SM1603 thru SM1624C STANDARD CAPACITANCE TVS ARRAY APPLICATIONS ✔ Wireless Communication Circuits ✔ RS-422, RS-432 & RS-485 ✔ Low Voltage ASICs ✔ Portable Electroincs IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs Level 1 (Line-Ground) & Level 2 (Line-Line) F E AT U R E S ✔ 500 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Unidirectional & Bidirectional Configurations ✔ ESD Protection > 40 kilovolts ✔ Available in Multiple Voltage Types: 3.3V to 24V ✔ Protects up to Eight (8) Lines ✔ RoHS Compliant MECHANICAL ✔ ✔ ✔ ✔ CHARACTERISTICS SO-16 Molded JEDEC SO-16 Package Weight 0.15 grams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 16mm Tape and Reel per EIA Standard 481 ✔ Packaging: 25 Pieces Per Tube ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATIONS 16 15 14 13 12 11 10 9 UNIDIRECTIONAL CONFIGURATION 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 BIDIRECTIONAL CONFIGURATION 1 2 3 4 5 6 7 8 05147.R6 2/07 1 www.protekdevices.com SM1603 thru SM1624C DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TL TSTG VALUE 500 -55 to 150 -55 to 150 UNITS Watts °C °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS 7.0 7.0 9.8 9.8 13.4 13.4 19.0 19.0 25.5 25.5 40.0 40.0 @ 25°C Unless Otherwise Specified MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE TEMPERATURE COEFFICIENT OF V(BR) qV(BR) mV/°C MAXIMUM CLAMPING VOLTAGE (See Fig. 2) V WM VOLTS SM1603 SM1603C SM1605 SM1605C SM1608 SM1608C SM1612 SM1612C SM1615 SM1615C SM1624 SM1624C 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 24.0 24.0 @ 1mA V(BR) VOLTS 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.7 16.7 26.7 26.7 @8/20µs VC @ IPP 10.9V 10.9V 13.5V 13.5V 16.9V 16.9V 25.9V 25.9V 30.0V 30.0V 49.0V 49.0V @ @ @ @ @ @ @ @ @ @ @ @ 43A 43A 42A 42A 34A 34A 21A 21A 17A 17A 12A 12A @VWM ID µA 125 125 10 10 10 10 2 2 2 2 2 2 0V @ 1 MHz C pF 800 450 550 310 500 280 185 105 140 80 88 50 -3 -3 3 3 9 9 16 16 17 17 26 26 Note 1: Part numbers with a “C” suffix are bidirectional devices. Note 2: VF = 1.5 Volts @ 100mA, 300µs (square wave) unidirectional devices only. 05147.R6 2/07 2 www.protekdevices.com SM1603 thru SM1624C GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10,000 PPP - Peak Pulse Power - Watts 500W 8/20µs Waveform 1,000 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGURE 2 PULSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 e-t td = t I /2 PP 0 5 10 15 20 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 80 % Of Rated Power Peak Pulse Power 8/20µs 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 05147.R6 2/07 3 www.protekdevices.com SM1603 thru SM1624C SO-16 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE -A- SO-16 16 9 PACKAGE DIMENSIONS -B- P 1 8 0.010” (0.25 MM) M BM 8 PL DIM A B C D F G J K P R NOTES MILLIMETERS MIN MAX 9.80 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX G C 0º - 7º -TK 16 PL 0.010” (0.25 MM) M TBS M R X 45º D AS F J 10.00 0.386 0.393 0.150 0.157 4.00 1.75 0.054 0.068 0.49 0.014 0.019 0.049 1.25 0.016 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.008 0.009 0.004 0.009 0.25 6.20 0.229 0.244 0.019 0.50 0.010 MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 1. 2. 3. 4. 5. 6. - T - = Seating Plane and Datum Surface. Dimensions “A” and “B” are Datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 1. 2. 3. 4. 5. Surface mount product is taped and reeled in accordance with EIA-481. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e. SM1605-T7. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e. SM1605-T13. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e. SM1605-LF-T7. No Suffix = Product Shipped in Tubes of 37 pcs per Tube. 0.160” ± 0.005” 0.245” MIN 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06007 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05147.R6 2/07 4